Vantage 6.10 quits working at midnight

Yahoo Archive
1
Maybe try turning off the scheduling of the backups at midnight and see if that helps? You can run a manual backup so you don't go a day without backing up?

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of richard.hyatt
Sent: Friday, June 13, 2008 10:22
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Vantage 6.10 quits working at midnight

--- In vantage@yahoogroups.com, Todd Caughey <caugheyt@...> wrote:
>I have batch files that runs the backup around midnight. Its been
scheduled that way log before I worked for the company and it just
started recently. I changed the NIC about two weeks ago. I believe
it has something to do with the backup, but not sure how to fix it.
There was nothing posted in the event viewer.


> Another couple things...maybe...
> - New NIC's power saving feature kicking in?
> - There is a backup that starts at midnight and tries to get at the
physical DB files (instead of just the Vantage backup file?
> (always exclude the db fsub-older from backups)
> If it is always at exactly the same time it sure sounds like
something scheduled is interfering.
> -Todd C.
>
> ________________________________
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf Of Greg Gillette
> Sent: Friday, June 13, 2008 8:07 AM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Vantage 6.10 quits working at midnight
>
>
> Anything in the Event Viewer? Do you have a backup or anti-virus
routine that runs then?
>
> -----Original Message-----
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On
Behalf Of richard.hyatt
> Sent: Friday, June 13, 2008 09:06
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Vantage 6.10 quits working at midnight
>
> For the passed few nights, Vantage has stopped working at midnight.
> The only solution to fixing the problem is by restarting the server.
> When the server is restarted, everything works fine until midnight the
> next night. I recently replaced a network card that went bad in the
> server with one of the same speed. Other than that, there has been no
> other problems occurring. Does anyone know why this is happening?
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> [Non-text portions of this message have been removed]
>



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
2
For the passed few nights, Vantage has stopped working at midnight.
The only solution to fixing the problem is by restarting the server.
When the server is restarted, everything works fine until midnight the
next night. I recently replaced a network card that went bad in the
server with one of the same speed. Other than that, there has been no
other problems occurring. Does anyone know why this is happening?
3
Anything in the Event Viewer? Do you have a backup or anti-virus routine that runs then?

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of richard.hyatt
Sent: Friday, June 13, 2008 09:06
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 6.10 quits working at midnight

For the passed few nights, Vantage has stopped working at midnight.
The only solution to fixing the problem is by restarting the server.
When the server is restarted, everything works fine until midnight the
next night. I recently replaced a network card that went bad in the
server with one of the same speed. Other than that, there has been no
other problems occurring. Does anyone know why this is happening?


------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
4
Another couple things...maybe...
- New NIC's power saving feature kicking in?
- There is a backup that starts at midnight and tries to get at the physical DB files (instead of just the Vantage backup file?
(always exclude the db fsub-older from backups)
If it is always at exactly the same time it sure sounds like something scheduled is interfering.
-Todd C.

________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Greg Gillette
Sent: Friday, June 13, 2008 8:07 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.10 quits working at midnight


Anything in the Event Viewer? Do you have a backup or anti-virus routine that runs then?

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of richard.hyatt
Sent: Friday, June 13, 2008 09:06
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Vantage 6.10 quits working at midnight

For the passed few nights, Vantage has stopped working at midnight.
The only solution to fixing the problem is by restarting the server.
When the server is restarted, everything works fine until midnight the
next night. I recently replaced a network card that went bad in the
server with one of the same speed. Other than that, there has been no
other problems occurring. Does anyone know why this is happening?

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links





[Non-text portions of this message have been removed]
5
Since you mention the NIC was replaced - is the vantage server a DHCP server? If yes, then make sure that the DHCP service is bound to the new NIC and the new IP address if that is the case. There are quite a few other weird things that can happen after replacing a NIC on a server, especially if the IP address has changed. A good place to start would be to enable logging on your switch and see what happens around midnight.

Up until 2 months ago, we had the same problem with printing. Vantage
(8.xx) would open and work normally but nobody could print . Solution
was to reboot the server, but the same thing would happen every day. The culprit turned out to be an automated
process (can't remember the name now) that the vantage server was
running at midnight every night. The process was an internal process in
vantage. After that was disabled, printing started working normally.
Although you have a different version, you
might have a similar issue if you patched recently. Other than this, you might also want to
check any processes that might be running at that time outside of
vantage at that time.

Thanks,
Kunal



----- Original Message ----
From: richard.hyatt <richard.hyatt@...>
To: vantage@yahoogroups.com
Sent: Friday, June 13, 2008 8:05:36 AM
Subject: [Vantage] Vantage 6.10 quits working at midnight


For the passed few nights, Vantage has stopped working at midnight.
The only solution to fixing the problem is by restarting the server.
When the server is restarted, everything works fine until midnight the
next night. I recently replaced a network card that went bad in the
server with one of the same speed. Other than that, there has been no
other problems occurring. Does anyone know why this is happening?






[Non-text portions of this message have been removed]
6
--- In vantage@yahoogroups.com, Todd Caughey <caugheyt@...> wrote:
>I have batch files that runs the backup around midnight. Its been
scheduled that way log before I worked for the company and it just
started recently. I changed the NIC about two weeks ago. I believe
it has something to do with the backup, but not sure how to fix it.
There was nothing posted in the event viewer.


> Another couple things...maybe...
> - New NIC's power saving feature kicking in?
> - There is a backup that starts at midnight and tries to get at the
physical DB files (instead of just the Vantage backup file?
> (always exclude the db fsub-older from backups)
> If it is always at exactly the same time it sure sounds like
something scheduled is interfering.
> -Todd C.
>
> ________________________________
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf Of Greg Gillette
> Sent: Friday, June 13, 2008 8:07 AM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Vantage 6.10 quits working at midnight
>
>
> Anything in the Event Viewer? Do you have a backup or anti-virus
routine that runs then?
>
> -----Original Message-----
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On
Behalf Of richard.hyatt
> Sent: Friday, June 13, 2008 09:06
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Vantage 6.10 quits working at midnight
>
> For the passed few nights, Vantage has stopped working at midnight.
> The only solution to fixing the problem is by restarting the server.
> When the server is restarted, everything works fine until midnight the
> next night. I recently replaced a network card that went bad in the
> server with one of the same speed. Other than that, there has been no
> other problems occurring. Does anyone know why this is happening?
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> [Non-text portions of this message have been removed]
>