Due to our company closing in the Chicagoland area, I am searching for a new
job opportunity which can somehow utilize my experience with the Vantage
system and other skills which I acquired while working in the plastics
industry.
I have used Vantage the better part of 2 years, and other operational
packages for 6 years. In that time I have gone to all the training classes,
trained our people in the company, worked on some Report Builder reports,
implemented live data collection, evaluated the 5.0 package as a Beta site,
and most of all contributed quite a bit to addressing bugs and improvements
which would aid the moldmaking industry and the general public with this
product. Security, patches, upkeep, and basically all aspects of the Vantage
was my responsibility.
Our company was 80 people strong, 6 live data collection terminals,
documentation management (file attachments in Vantage system), and 15 full
licenses.
If anyone can provide some references, it would be greatly appreciated.
My personal e-mail address is deltatechmold@.... Fax number is
847-259-5625
Sincerely,
Ron Cisliek
(formerly Executive Vice President of Delta Tech Mold, Inc. located in
Arlington Heights, IL)
SEE BELOW FOR DETAILED RESUME
Ronny M. Cisliek
1509 Countryside Drive
Buffalo Grove, IL 60089
e-mail: deltatechmold@...
Objective: To obtain a Sales, Engineering, or Project Management position
utilizing the knowledge that I acquired while working directly in the
plastics industry.
Delta Tech Mold, Inc.
Arlington Heights, IL
1998 - Present Executive Vice President
Responsibilities: Focused on operational improvements via technology and one
on one contact with employees and customers. Managed new operational
software (Vantage) and maintenance of computer network. Addressed problems
in the business to maintain employee efficiency and product throughput.
Worked with customers on their product to reduce manufacturing cost and time
to market delays. Negotiated contracts and worked with the cost estimating /
marketing department to generate sales.
1995 - 1998 Vice President of Technology
Responsibilities: Oversee Engineering and technology resources. Actively
participated in ISO9001 accreditation. Involved in implementation and
execution of Y2K network and operational software. Developed procedures
within the organization for ISO9001, customers, and daily operations.
Participated in Sales & Marketing via one on one customer contact and
quoting.
1993 - 1995 Project Coordinator
Responsibilities: Handling all customer and company communications for
orders placed with DTM. Extensive use of project management software and
other documentation processes. Participated in Sales & Marketing via one on
one customer contact and quoting.
Zeller Plastik, Inc. (a Crown, Cork, & Seal Company)
Libertyville, IL
1993 - 1991 Product Development Engineer
Responsibilities: Executing development and testing of custom and stock
consumer packaging for the closures industry. The position required
utilizing CAD, Project Management Tools, Testing Methods, and Communication
skills. Obtained patent 5,632,420 on product designed and developed at
company. Was responsible in global standardization of CAD and communication
platforms with sister companies across the world. Handled on-site customer
troubleshooting of products supplied from our company.
Summer 1990 Intern
Responsibilities: Performed a case study using Taguchi and other SPC methods
to determine effects of processing and design standards on products produced
at the company. Findings obtained were published internally to aid in
improvements of goods produced.
Ferris State University
Big Rapids, MI
May 1991 obtained B.S. in Product Development Technology
May 1989 obtained A.A.S. in Technical Drafting and Tool Design
Awarded outstanding Student Award 1988-1989
Stevenson High School
Prairie View, IL
1987 graduated High School with Honors
Skills
- Operational Software
o E-Mfg from Epicor, Jobboss
- CAD
o SDRC, Cadkey, UG, Pro-E, Solidworks, IronCAD
- Project Management
o Microsoft Project 2000
- Office Products
o Word, Excel, PowerPoint, Corel Draw, Internet Explorer, Outlook, Lotus
Notes
- Operating Systems
o Windows 2000, NT, 98, 95, Dos, and basic Hp Unix
- Other
o Plastics Knowledge, FTP, Tape Back-up, and Network Administration
Languages
- German
Hobbies
- Golf, Volleyball, Racquetball, Softball, Computers
job opportunity which can somehow utilize my experience with the Vantage
system and other skills which I acquired while working in the plastics
industry.
I have used Vantage the better part of 2 years, and other operational
packages for 6 years. In that time I have gone to all the training classes,
trained our people in the company, worked on some Report Builder reports,
implemented live data collection, evaluated the 5.0 package as a Beta site,
and most of all contributed quite a bit to addressing bugs and improvements
which would aid the moldmaking industry and the general public with this
product. Security, patches, upkeep, and basically all aspects of the Vantage
was my responsibility.
Our company was 80 people strong, 6 live data collection terminals,
documentation management (file attachments in Vantage system), and 15 full
licenses.
If anyone can provide some references, it would be greatly appreciated.
My personal e-mail address is deltatechmold@.... Fax number is
847-259-5625
Sincerely,
Ron Cisliek
(formerly Executive Vice President of Delta Tech Mold, Inc. located in
Arlington Heights, IL)
SEE BELOW FOR DETAILED RESUME
Ronny M. Cisliek
1509 Countryside Drive
Buffalo Grove, IL 60089
e-mail: deltatechmold@...
Objective: To obtain a Sales, Engineering, or Project Management position
utilizing the knowledge that I acquired while working directly in the
plastics industry.
Delta Tech Mold, Inc.
Arlington Heights, IL
1998 - Present Executive Vice President
Responsibilities: Focused on operational improvements via technology and one
on one contact with employees and customers. Managed new operational
software (Vantage) and maintenance of computer network. Addressed problems
in the business to maintain employee efficiency and product throughput.
Worked with customers on their product to reduce manufacturing cost and time
to market delays. Negotiated contracts and worked with the cost estimating /
marketing department to generate sales.
1995 - 1998 Vice President of Technology
Responsibilities: Oversee Engineering and technology resources. Actively
participated in ISO9001 accreditation. Involved in implementation and
execution of Y2K network and operational software. Developed procedures
within the organization for ISO9001, customers, and daily operations.
Participated in Sales & Marketing via one on one customer contact and
quoting.
1993 - 1995 Project Coordinator
Responsibilities: Handling all customer and company communications for
orders placed with DTM. Extensive use of project management software and
other documentation processes. Participated in Sales & Marketing via one on
one customer contact and quoting.
Zeller Plastik, Inc. (a Crown, Cork, & Seal Company)
Libertyville, IL
1993 - 1991 Product Development Engineer
Responsibilities: Executing development and testing of custom and stock
consumer packaging for the closures industry. The position required
utilizing CAD, Project Management Tools, Testing Methods, and Communication
skills. Obtained patent 5,632,420 on product designed and developed at
company. Was responsible in global standardization of CAD and communication
platforms with sister companies across the world. Handled on-site customer
troubleshooting of products supplied from our company.
Summer 1990 Intern
Responsibilities: Performed a case study using Taguchi and other SPC methods
to determine effects of processing and design standards on products produced
at the company. Findings obtained were published internally to aid in
improvements of goods produced.
Ferris State University
Big Rapids, MI
May 1991 obtained B.S. in Product Development Technology
May 1989 obtained A.A.S. in Technical Drafting and Tool Design
Awarded outstanding Student Award 1988-1989
Stevenson High School
Prairie View, IL
1987 graduated High School with Honors
Skills
- Operational Software
o E-Mfg from Epicor, Jobboss
- CAD
o SDRC, Cadkey, UG, Pro-E, Solidworks, IronCAD
- Project Management
o Microsoft Project 2000
- Office Products
o Word, Excel, PowerPoint, Corel Draw, Internet Explorer, Outlook, Lotus
Notes
- Operating Systems
o Windows 2000, NT, 98, 95, Dos, and basic Hp Unix
- Other
o Plastics Knowledge, FTP, Tape Back-up, and Network Administration
Languages
- German
Hobbies
- Golf, Volleyball, Racquetball, Softball, Computers