Report Builder 6.1

Yahoo Archive
1
Could I also get a copy of that please! It would be most helpful!

Thanks,
Jasper

-----Original Message-----
From: John Walter [mailto:john.w@...]
Sent: Tuesday, March 27, 2007 11:28 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Re: Report Builder 6.1



Can you also copy me with these. Thanks in advance

John Walter | National IS Manager | Hufcor Pty Ltd
7 Trade Park Drive, Tullamarine Vic 3043
Phone +61 3 9330 3733 | Fax +61 3 9338 9015
Email john.w@hufcor. <mailto:john.w%40hufcor.com.au> com.au
www.hufcor.com.au

-----Original Message-----
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com [mailto: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On Behalf Of
Todd Caughey
Sent: Wednesday, 28 March 2007 7:47 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] Re: Report Builder 6.1

Thanks Lonnie for the OK. I sent the bundle of messages to Sandy with the
attachments.
-Todd C.


-----Original Message-----
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com [mailto: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com]On Behalf Of
lonniedrew
Sent: Tuesday, March 27, 2007 4:24 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] Re: Report Builder 6.1

Yes I'm lurking today - LOL

Fire away with them. I can't promise full support, but I can help a
little, if needed.

Lonnie

--- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, "Todd
Caughey" <caugheyt@...> wrote:
>
> Last July Lonnie Drew, here in the group, helped me very greatly
with a .W progress routine to fire off a Report Builder report in
Export mode and run it from the menus. Very handy. I would forward
the offlist emails but hesitate to presume on someone else's work
and such without permission, especially when I can't really backup
it up with any support and can't really commit Lonnie's help. If
you don't have the email address from an old post I can forward it
off-list.
>
> Or....Lonnie if you're reading posts just give me the OK to
forward the posts. I've cloned the routine off and used it for
several exports...so thanks again!
>
> -Todd C.
>
>
> -----Original Message-----
> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com [mailto:
vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com]On
Behalf Of Sandy Morse
> Sent: Tuesday, March 27, 2007 9:52 AM
> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> Subject: [Vantage] Report Builder 6.1
>
>
>
> Is there a way to have a report builder program on the Custom
Report
> Link do the export instead of the print. I can run the export from
> Report Builder itself but that option is not available to anyone
on the
> menu item. Can this be done?
>
> Thanks!
> Sandy Morse
> BVR Technologies Company
> 815-874-2471 x112
>
> The information in this message is proprietary and/or confidential
and
> is intended only for the use of the individual(s) named above. This
> message should not be forwarded without permission from the
author. If
> this message is received in error or otherwise by someone other
than the
> addressee, please contact the author at the above number and
return the
> message or destroy it. In addition, the recipient of this data
agrees to
> abide by the United States Export Control of Technical Data and
> Equipment under the International Traffic in Arms Regulations
(ITAR) and
> Export Administration Regulations (EAR). The recipient agrees to
abide
> by these laws and their regulations not only for export and re-
export,
> but for disclosure to non-U.S. citizens.
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups. <http://groups.yahoo.com/group/vantage/files/.> yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups. <http://groups.yahoo.com/group/vantage/messages> yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups. <http://groups.yahoo.com/group/vantage/links> yahoo.com/group/vantage/links
Yahoo! Groups Links







[Non-text portions of this message have been removed]
2
Is there a way to have a report builder program on the Custom Report
Link do the export instead of the print. I can run the export from
Report Builder itself but that option is not available to anyone on the
menu item. Can this be done?

Thanks!
Sandy Morse
BVR Technologies Company
815-874-2471 x112

The information in this message is proprietary and/or confidential and
is intended only for the use of the individual(s) named above. This
message should not be forwarded without permission from the author. If
this message is received in error or otherwise by someone other than the
addressee, please contact the author at the above number and return the
message or destroy it. In addition, the recipient of this data agrees to
abide by the United States Export Control of Technical Data and
Equipment under the International Traffic in Arms Regulations (ITAR) and
Export Administration Regulations (EAR). The recipient agrees to abide
by these laws and their regulations not only for export and re-export,
but for disclosure to non-U.S. citizens.
3
Sandy,
On vantage 4.0 we could export to a generic text printer we set up
in control panel/printers. When we went to 6.1 and office 2000 exports
started to shift lines off and page breaks shifted lines. We puchase a
text driver called STG Text printer for about 100 bucks and let us
do exports w/o lines shifting left or right. You have to click off the
print preview and select the stg printer and then type in the
drive/path/filename. This works for the reports off the regular menu
trees, haven't tried it from the custom report link.
Dennis

Sandy Morse wrote:

> Is there a way to have a report builder program on the Custom Report
> Link do the export instead of the print. I can run the export from
> Report Builder itself but that option is not available to anyone on the
> menu item. Can this be done?
>
> Thanks!
> Sandy Morse
> BVR Technologies Company
> 815-874-2471 x112
>
> The information in this message is proprietary and/or confidential and
> is intended only for the use of the individual(s) named above. This
> message should not be forwarded without permission from the author. If
> this message is received in error or otherwise by someone other than the
> addressee, please contact the author at the above number and return the
> message or destroy it. In addition, the recipient of this data agrees to
> abide by the United States Export Control of Technical Data and
> Equipment under the International Traffic in Arms Regulations (ITAR) and
> Export Administration Regulations (EAR). The recipient agrees to abide
> by these laws and their regulations not only for export and re-export,
> but for disclosure to non-U.S. citizens.
>
>
4
Last July Lonnie Drew, here in the group, helped me very greatly with a .W progress routine to fire off a Report Builder report in Export mode and run it from the menus. Very handy. I would forward the offlist emails but hesitate to presume on someone else's work and such without permission, especially when I can't really backup it up with any support and can't really commit Lonnie's help. If you don't have the email address from an old post I can forward it off-list.

Or....Lonnie if you're reading posts just give me the OK to forward the posts. I've cloned the routine off and used it for several exports...so thanks again!

-Todd C.


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of Sandy Morse
Sent: Tuesday, March 27, 2007 9:52 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder 6.1



Is there a way to have a report builder program on the Custom Report
Link do the export instead of the print. I can run the export from
Report Builder itself but that option is not available to anyone on the
menu item. Can this be done?

Thanks!
Sandy Morse
BVR Technologies Company
815-874-2471 x112

The information in this message is proprietary and/or confidential and
is intended only for the use of the individual(s) named above. This
message should not be forwarded without permission from the author. If
this message is received in error or otherwise by someone other than the
addressee, please contact the author at the above number and return the
message or destroy it. In addition, the recipient of this data agrees to
abide by the United States Export Control of Technical Data and
Equipment under the International Traffic in Arms Regulations (ITAR) and
Export Administration Regulations (EAR). The recipient agrees to abide
by these laws and their regulations not only for export and re-export,
but for disclosure to non-U.S. citizens.






[Non-text portions of this message have been removed]
5
Yes I'm lurking today - LOL

Fire away with them. I can't promise full support, but I can help a
little, if needed.

Lonnie


--- In vantage@yahoogroups.com, "Todd Caughey" <caugheyt@...> wrote:
>
> Last July Lonnie Drew, here in the group, helped me very greatly
with a .W progress routine to fire off a Report Builder report in
Export mode and run it from the menus. Very handy. I would forward
the offlist emails but hesitate to presume on someone else's work
and such without permission, especially when I can't really backup
it up with any support and can't really commit Lonnie's help. If
you don't have the email address from an old post I can forward it
off-list.
>
> Or....Lonnie if you're reading posts just give me the OK to
forward the posts. I've cloned the routine off and used it for
several exports...so thanks again!
>
> -Todd C.
>
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
Behalf Of Sandy Morse
> Sent: Tuesday, March 27, 2007 9:52 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Report Builder 6.1
>
>
>
> Is there a way to have a report builder program on the Custom
Report
> Link do the export instead of the print. I can run the export from
> Report Builder itself but that option is not available to anyone
on the
> menu item. Can this be done?
>
> Thanks!
> Sandy Morse
> BVR Technologies Company
> 815-874-2471 x112
>
> The information in this message is proprietary and/or confidential
and
> is intended only for the use of the individual(s) named above. This
> message should not be forwarded without permission from the
author. If
> this message is received in error or otherwise by someone other
than the
> addressee, please contact the author at the above number and
return the
> message or destroy it. In addition, the recipient of this data
agrees to
> abide by the United States Export Control of Technical Data and
> Equipment under the International Traffic in Arms Regulations
(ITAR) and
> Export Administration Regulations (EAR). The recipient agrees to
abide
> by these laws and their regulations not only for export and re-
export,
> but for disclosure to non-U.S. citizens.
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
6
Thanks Lonnie for the OK. I sent the bundle of messages to Sandy with the attachments.
-Todd C.


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of lonniedrew
Sent: Tuesday, March 27, 2007 4:24 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Report Builder 6.1



Yes I'm lurking today - LOL

Fire away with them. I can't promise full support, but I can help a
little, if needed.

Lonnie

--- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, "Todd Caughey" <caugheyt@...> wrote:
>
> Last July Lonnie Drew, here in the group, helped me very greatly
with a .W progress routine to fire off a Report Builder report in
Export mode and run it from the menus. Very handy. I would forward
the offlist emails but hesitate to presume on someone else's work
and such without permission, especially when I can't really backup
it up with any support and can't really commit Lonnie's help. If
you don't have the email address from an old post I can forward it
off-list.
>
> Or....Lonnie if you're reading posts just give me the OK to
forward the posts. I've cloned the routine off and used it for
several exports...so thanks again!
>
> -Todd C.
>
>
> -----Original Message-----
> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com [mailto: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com]On
Behalf Of Sandy Morse
> Sent: Tuesday, March 27, 2007 9:52 AM
> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> Subject: [Vantage] Report Builder 6.1
>
>
>
> Is there a way to have a report builder program on the Custom
Report
> Link do the export instead of the print. I can run the export from
> Report Builder itself but that option is not available to anyone
on the
> menu item. Can this be done?
>
> Thanks!
> Sandy Morse
> BVR Technologies Company
> 815-874-2471 x112
>
> The information in this message is proprietary and/or confidential
and
> is intended only for the use of the individual(s) named above. This
> message should not be forwarded without permission from the
author. If
> this message is received in error or otherwise by someone other
than the
> addressee, please contact the author at the above number and
return the
> message or destroy it. In addition, the recipient of this data
agrees to
> abide by the United States Export Control of Technical Data and
> Equipment under the International Traffic in Arms Regulations
(ITAR) and
> Export Administration Regulations (EAR). The recipient agrees to
abide
> by these laws and their regulations not only for export and re-
export,
> but for disclosure to non-U.S. citizens.
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>







[Non-text portions of this message have been removed]
7
Can you also copy me with these. Thanks in advance

John Walter | National IS Manager | Hufcor Pty Ltd
7 Trade Park Drive, Tullamarine Vic 3043
Phone +61 3 9330 3733 | Fax +61 3 9338 9015
Email john.w@...
www.hufcor.com.au

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Todd Caughey
Sent: Wednesday, 28 March 2007 7:47 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Re: Report Builder 6.1

Thanks Lonnie for the OK. I sent the bundle of messages to Sandy with the
attachments.
-Todd C.


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of
lonniedrew
Sent: Tuesday, March 27, 2007 4:24 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Report Builder 6.1



Yes I'm lurking today - LOL

Fire away with them. I can't promise full support, but I can help a
little, if needed.

Lonnie

--- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, "Todd
Caughey" <caugheyt@...> wrote:
>
> Last July Lonnie Drew, here in the group, helped me very greatly
with a .W progress routine to fire off a Report Builder report in
Export mode and run it from the menus. Very handy. I would forward
the offlist emails but hesitate to presume on someone else's work
and such without permission, especially when I can't really backup
it up with any support and can't really commit Lonnie's help. If
you don't have the email address from an old post I can forward it
off-list.
>
> Or....Lonnie if you're reading posts just give me the OK to
forward the posts. I've cloned the routine off and used it for
several exports...so thanks again!
>
> -Todd C.
>
>
> -----Original Message-----
> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com [mailto:
vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com]On
Behalf Of Sandy Morse
> Sent: Tuesday, March 27, 2007 9:52 AM
> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> Subject: [Vantage] Report Builder 6.1
>
>
>
> Is there a way to have a report builder program on the Custom
Report
> Link do the export instead of the print. I can run the export from
> Report Builder itself but that option is not available to anyone
on the
> menu item. Can this be done?
>
> Thanks!
> Sandy Morse
> BVR Technologies Company
> 815-874-2471 x112
>
> The information in this message is proprietary and/or confidential
and
> is intended only for the use of the individual(s) named above. This
> message should not be forwarded without permission from the
author. If
> this message is received in error or otherwise by someone other
than the
> addressee, please contact the author at the above number and
return the
> message or destroy it. In addition, the recipient of this data
agrees to
> abide by the United States Export Control of Technical Data and
> Equipment under the International Traffic in Arms Regulations
(ITAR) and
> Export Administration Regulations (EAR). The recipient agrees to
abide
> by these laws and their regulations not only for export and re-
export,
> but for disclosure to non-U.S. citizens.
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>







[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links