Possible Bug V6.10.533

Yahoo Archive
1
I actually saw this problem occur before, only occasionally and only on
night shift when it spanned midnight. I haven't seen it in a long time,
though, so I am really no help at all, because it was very infrequent I
didn't really investigate it, and I haven't seen it in a long time.
2
My production people have notified me that they noticed something
strange with an individuals Labor Time.

It appears that the amount of labor time was cut in half. They would
be punched into a job from 2 to 6 for example and only show 2 hours
of labor.

I did some checking and found that it has happened sporadically for
as far back as I checked, which was 1/1/05. I have not identified a
pattern other than it seemed to happen mostly on 3rd shift.

I know the individuals I've checked into were not working on 2 jobs
simultaneously which would've made sense. I looked at the jobs they
were working on and nothing seemed out of the ordinary.

Can anyone else explain why this may be occurring or is it a bug?
Can someone else check their data to see if labor time is being cut
in half for no apparent reason? I'm going to be calling support
about this, but of course I wanted to ask the real world experts
first.

Thanks,

Brian Stenglein
Clow Stamping Co.
3
Have you verified your Shift settings ? and the shifts that Employees
are assigned to ?

-----Original Message-----
From: Brian Stenglein [mailto:bstenglein@...]
Sent: Thursday, April 13, 2006 1:55 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Possible Bug V6.10.533

My production people have notified me that they noticed something
strange with an individuals Labor Time.

It appears that the amount of labor time was cut in half. They would
be punched into a job from 2 to 6 for example and only show 2 hours
of labor.

I did some checking and found that it has happened sporadically for
as far back as I checked, which was 1/1/05. I have not identified a
pattern other than it seemed to happen mostly on 3rd shift.

I know the individuals I've checked into were not working on 2 jobs
simultaneously which would've made sense. I looked at the jobs they
were working on and nothing seemed out of the ordinary.

Can anyone else explain why this may be occurring or is it a bug?
Can someone else check their data to see if labor time is being cut
in half for no apparent reason? I'm going to be calling support
about this, but of course I wanted to ask the real world experts
first.

Thanks,

Brian Stenglein
Clow Stamping Co.





Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
4
Check how they set up the labor on the operations they clocked onto.
Sometimes this can affect as well.


M. Manasa Reddy
ERP Systems Specialist
Crestview Aerospace Corporation
Email: mmreddy@...
Phone: (850) 682-2746 x 272




________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Clint Muhlestein
Sent: Thursday, April 13, 2006 3:08 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Possible Bug V6.10.533


Have you verified your Shift settings ? and the shifts that Employees
are assigned to ?

-----Original Message-----
From: Brian Stenglein [mailto:bstenglein@...]
Sent: Thursday, April 13, 2006 1:55 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Possible Bug V6.10.533

My production people have notified me that they noticed something
strange with an individuals Labor Time.

It appears that the amount of labor time was cut in half. They would
be punched into a job from 2 to 6 for example and only show 2 hours
of labor.

I did some checking and found that it has happened sporadically for
as far back as I checked, which was 1/1/05. I have not identified a
pattern other than it seemed to happen mostly on 3rd shift.

I know the individuals I've checked into were not working on 2 jobs
simultaneously which would've made sense. I looked at the jobs they
were working on and nothing seemed out of the ordinary.

Can anyone else explain why this may be occurring or is it a bug?
Can someone else check their data to see if labor time is being cut
in half for no apparent reason? I'm going to be calling support
about this, but of course I wanted to ask the real world experts
first.

Thanks,

Brian Stenglein
Clow Stamping Co.





Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Manufacturing software
<http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w4=Pda+database+software&w5=Database+management+software&w6=Database
+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>
Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>
Database mortgage software
<http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manuf
acturing+software&w2=Membership+database+software&w3=Database+mortgage+s
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Data
base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>
Pda database software
<http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4=Pda+database+software&w5=Database+management+software&w6=Database+
marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> Database
management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>
Database marketing software
<http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manu
facturing+software&w2=Membership+database+software&w3=Database+mortgage+
software&w4=Pda+database+software&w5=Database+management+software&w6=Dat
abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

________________________________

YAHOO! GROUPS LINKS



* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .


________________________________




[Non-text portions of this message have been removed]
5
Our production people do not have unpaid breaks so there shouldn't be
anything affecting their time that I'm aware of.

Brian Stenglein
Clow Stamping Co.

--- In vantage@yahoogroups.com, "Clint Muhlestein" <cmuhlestein@...>
wrote:
>
> Have you verified your Shift settings ? and the shifts that
Employees
> are assigned to ?
>
> -----Original Message-----
> From: Brian Stenglein [mailto:bstenglein@...]
> Sent: Thursday, April 13, 2006 1:55 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Possible Bug V6.10.533
>
> My production people have notified me that they noticed something
> strange with an individuals Labor Time.
>
> It appears that the amount of labor time was cut in half. They
would
> be punched into a job from 2 to 6 for example and only show 2 hours
> of labor.
>
> I did some checking and found that it has happened sporadically for
> as far back as I checked, which was 1/1/05. I have not identified
a
> pattern other than it seemed to happen mostly on 3rd shift.
>
> I know the individuals I've checked into were not working on 2 jobs
> simultaneously which would've made sense. I looked at the jobs
they
> were working on and nothing seemed out of the ordinary.
>
> Can anyone else explain why this may be occurring or is it a bug?
> Can someone else check their data to see if labor time is being cut
> in half for no apparent reason? I'm going to be calling support
> about this, but of course I wanted to ask the real world experts
> first.
>
> Thanks,
>
> Brian Stenglein
> Clow Stamping Co.
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
6
I thought ablut that and looked at the one recent example and
everything appeared normal.

This problem of dividing time has even happened when someone is
punched into indirect, so I don't think it is job related.

Thanks,

Brian Stenglein
Clow Stamping Co.

--- In vantage@yahoogroups.com, "Manasa Reddy" <mmreddy@...> wrote:
>
> Check how they set up the labor on the operations they clocked onto.
> Sometimes this can affect as well.
>
>
> M. Manasa Reddy
> ERP Systems Specialist
> Crestview Aerospace Corporation
> Email: mmreddy@...
> Phone: (850) 682-2746 x 272
>
>
>
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of Clint Muhlestein
> Sent: Thursday, April 13, 2006 3:08 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Possible Bug V6.10.533
>
>
> Have you verified your Shift settings ? and the shifts that
Employees
> are assigned to ?
>
> -----Original Message-----
> From: Brian Stenglein [mailto:bstenglein@...]
> Sent: Thursday, April 13, 2006 1:55 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Possible Bug V6.10.533
>
> My production people have notified me that they noticed something
> strange with an individuals Labor Time.
>
> It appears that the amount of labor time was cut in half. They
would
> be punched into a job from 2 to 6 for example and only show 2 hours
> of labor.
>
> I did some checking and found that it has happened sporadically for
> as far back as I checked, which was 1/1/05. I have not identified
a
> pattern other than it seemed to happen mostly on 3rd shift.
>
> I know the individuals I've checked into were not working on 2 jobs
> simultaneously which would've made sense. I looked at the jobs
they
> were working on and nothing seemed out of the ordinary.
>
> Can anyone else explain why this may be occurring or is it a bug?
> Can someone else check their data to see if labor time is being cut
> in half for no apparent reason? I'm going to be calling support
> about this, but of course I wanted to ask the real world experts
> first.
>
> Thanks,
>
> Brian Stenglein
> Clow Stamping Co.
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
>
>
>
> SPONSORED LINKS
> Manufacturing software
> <http://groups.yahoo.com/gads?
t=ms&k=Manufacturing+software&w1=Manufactu
>
ring+software&w2=Membership+database+software&w3=Database+mortgage+sof
tw
>
are&w4=Pda+database+software&w5=Database+management+software&w6=Databa
se
> +marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>
> Membership database software
> <http://groups.yahoo.com/gads?
t=ms&k=Membership+database+software&w1=Man
>
ufacturing+software&w2=Membership+database+software&w3=Database+mortga
ge
>
+software&w4=Pda+database+software&w5=Database+management+software&w6=
Da
> tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>
> Database mortgage software
> <http://groups.yahoo.com/gads?
t=ms&k=Database+mortgage+software&w1=Manuf
>
acturing+software&w2=Membership+database+software&w3=Database+mortgage
+s
>
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Da
ta
> base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>

> Pda database software
> <http://groups.yahoo.com/gads?
t=ms&k=Pda+database+software&w1=Manufactur
>
ing+software&w2=Membership+database+software&w3=Database+mortgage+soft
wa
>
re&w4=Pda+database+software&w5=Database+management+software&w6=Databas
e+
> marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg>
Database
> management software
> <http://groups.yahoo.com/gads?
t=ms&k=Database+management+software&w1=Man
>
ufacturing+software&w2=Membership+database+software&w3=Database+mortga
ge
>
+software&w4=Pda+database+software&w5=Database+management+software&w6=
Da
> tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>
> Database marketing software
> <http://groups.yahoo.com/gads?
t=ms&k=Database+marketing+software&w1=Manu
>
facturing+software&w2=Membership+database+software&w3=Database+mortgag
e+
>
software&w4=Pda+database+software&w5=Database+management+software&w6=D
at
> abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

>
> ________________________________
>
> YAHOO! GROUPS LINKS
>
>
>
> * Visit your group "vantage
> <http://groups.yahoo.com/group/vantage> " on the web.
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/> .
>
>
> ________________________________
>
>
>
>
> [Non-text portions of this message have been removed]
>