OT:Cisco router

Yahoo Archive
1
Would you like another watch guard - can't stand the thing, but other folks seem to like them. So we have one gathering dust.

Charles


----- Original Message -----
From: Paul Lipham
To: vantage@yahoogroups.com
Sent: Wednesday, June 30, 2004 10:35 AM
Subject: RE: [Vantage] OT:Cisco router


Watchguard is telling me that the secondary network that I have setup on the
X1000 is fine, but there is a conflict with the cisco router. They want me
to remove the secondary network from the eth0/0 and change the static route
to point to the IP of the firebox. Currently the static route for the
secondary network points to the eth0/0 The problem is the primary network
is fine, but the secondary network can't access the internet.

Paul

-----Original Message-----
From: Jasper Recto [mailto:jrecto@...]
Sent: Wednesday, June 30, 2004 9:16 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT:Cisco router


What routing changes do you need to make?
Jasper

-----Original Message-----
From: Paul Lipham [mailto:pml@...]
Sent: Wednesday, June 30, 2004 9:55 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT:Cisco router


Does anyone have knowledge of how to program a cisco 2610 router. I have
installed a new firewall and need to make a couple of changes to my routing,
but have never done that before. I can connect to the router, but at thats
about all. If so it would be awesome if you could contact me off list.

Thanks
Paul Lipham
paull@...
Alabama Specialty Products, Inc.
256-358-5230


[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Yahoo! Groups Links







Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://us.ard.yahoo.com/SIG=129snls49/M=295196.4901138.6071305.3001176/D=gr
oups/S=1705007183:HM/EXP=1088691411/A=2128215/R=0/SIG=10se96mf6/*http://comp
anion.yahoo.com> click here

<http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=
:HM/A=2128215/rand=717211775>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links


Yahoo! Groups Sponsor
ADVERTISEMENT





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




[Non-text portions of this message have been removed]
2
A Few days back people were talking about a great deal on a Battery backup
unit at Sams
Check this out this deal
APC 100VA with 8 outlets SMART UPS Marked down almost 50%!

http://www.buy.com/retail/product.asp?sku=10314610
<http://www.buy.com/retail/product.asp?sku=10314610&dcaid=1688> &dcaid=1688

Hope you are able to grab a couple at this price

James Piper - Meco Inc - Paris, IL



[Non-text portions of this message have been removed]
3
Does anyone have knowledge of how to program a cisco 2610 router. I have
installed a new firewall and need to make a couple of changes to my routing,
but have never done that before. I can connect to the router, but at thats
about all. If so it would be awesome if you could contact me off list.

Thanks
Paul Lipham
paull@...
Alabama Specialty Products, Inc.
256-358-5230


[Non-text portions of this message have been removed]
4
At 09:30 AM 6/30/2004, you wrote:
>A Few days back people were talking about a great deal on a Battery
>backup unit at Sams
>Check this out this deal APC 100VA with 8 outlets SMART UPS Marked down
>almost 50%!
> http://www.buy.com/retail/product.asp?sku=10314610

Uuhh... that one says it's 230V input and output; apparently for European
markets or something?

The Sam's one was a little larger (1100VA vs. 1000) and half the price
($125). It comes with their "PowerChute Plus" software. APC says it will
hold up a workstation and large monitor for 30 - 55 minutes. I tried it
with two PCs (one's a mini-server with 3 high-end SCSI drives) and two 19"
monitors, and it was OK for 7 minutes before I got sick of the beeping
alarm (there's no silence button.) Around here, the power either goes out
for a couple seconds or a couple days, so we're not worried about
multi-hour-run UPSes.

-Wayne Cox
Twenty Three -- Information Technology Consulting
828-685-2338



[Non-text portions of this message have been removed]
5
What routing changes do you need to make?
Jasper

-----Original Message-----
From: Paul Lipham [mailto:pml@...]
Sent: Wednesday, June 30, 2004 9:55 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT:Cisco router


Does anyone have knowledge of how to program a cisco 2610 router. I have
installed a new firewall and need to make a couple of changes to my routing,
but have never done that before. I can connect to the router, but at thats
about all. If so it would be awesome if you could contact me off list.

Thanks
Paul Lipham
paull@...
Alabama Specialty Products, Inc.
256-358-5230


[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
6
Watchguard is telling me that the secondary network that I have setup on the
X1000 is fine, but there is a conflict with the cisco router. They want me
to remove the secondary network from the eth0/0 and change the static route
to point to the IP of the firebox. Currently the static route for the
secondary network points to the eth0/0 The problem is the primary network
is fine, but the secondary network can't access the internet.

Paul

-----Original Message-----
From: Jasper Recto [mailto:jrecto@...]
Sent: Wednesday, June 30, 2004 9:16 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT:Cisco router


What routing changes do you need to make?
Jasper

-----Original Message-----
From: Paul Lipham [mailto:pml@...]
Sent: Wednesday, June 30, 2004 9:55 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT:Cisco router


Does anyone have knowledge of how to program a cisco 2610 router. I have
installed a new firewall and need to make a couple of changes to my routing,
but have never done that before. I can connect to the router, but at thats
about all. If so it would be awesome if you could contact me off list.

Thanks
Paul Lipham
paull@...
Alabama Specialty Products, Inc.
256-358-5230


[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Yahoo! Groups Links







Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://us.ard.yahoo.com/SIG=129snls49/M=295196.4901138.6071305.3001176/D=gr
oups/S=1705007183:HM/EXP=1088691411/A=2128215/R=0/SIG=10se96mf6/*http://comp
anion.yahoo.com> click here

<http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=
:HM/A=2128215/rand=717211775>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]