Novell... losing mapped drive to Vantage

Yahoo Archive
1
Lois,
I'm not sure were to go with this. Here are a few suggestions I have seen
over the years. Sometimes when a problem mapping happens the PC has a
conflicting mapping. The PC map be set to reconnect at login to one drive
letter and the Network login says another drive letter, or same drive letter
different path. Is it the person logging in? May be there is something
about their login. Have them login someplace else and use a different login
on the PC having the problem.
Hope this helps a little.
Nancy

-----Original Message-----
From: Heisey, Lois [mailto:lheisey@...]
Sent: Thursday, November 15, 2001 9:17 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Novell... losing mapped drive to Vantage


the drive is V, win98SE, a login script that does not include the mapping to
vantage. Just a mapped drive from Novell.

-----Original Message-----
From: Dunn, Nancy [mailto:ndunn@...]
Sent: Thursday, November 15, 2001 8:01 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Novell... losing mapped drive to Vantage


What is the Drive letter you are using? And what is the operating system of
the workstation?
Are you using a login script?
Nancy Dunn
Winco Ind.

-----Original Message-----
From: lheisey@... [mailto:lheisey@...]
Sent: Thursday, November 15, 2001 8:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Novell... losing mapped drive to Vantage


Would anyone know why a workstation would continually lose its mapped
drive to Vantage? I really can not see what the problem is.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
2
Would anyone know why a workstation would continually lose its mapped
drive to Vantage? I really can not see what the problem is.
3
What is the Drive letter you are using? And what is the operating system of
the workstation?
Are you using a login script?
Nancy Dunn
Winco Ind.

-----Original Message-----
From: lheisey@... [mailto:lheisey@...]
Sent: Thursday, November 15, 2001 8:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Novell... losing mapped drive to Vantage


Would anyone know why a workstation would continually lose its mapped
drive to Vantage? I really can not see what the problem is.
4
Does the drive mapping go away or is it the drive letter where the client
thinks Vantage should be that changes? I am not familiar with Novell drive
mapping but if it is in the client setup I can say I had a lot of problems
with this awhile back. I had some people with drive letter E: and some with
drive V: and when client setup was run even if "save as default" was
unchecked it would set it for everyone else. I finally got around to making
everyone V: and also restricting access to the clientsetup so now only I can
run it. All the problems stopped immediately. I nver did figure out if it
was a bug in the clientsetup or users not running it right (checking save
default).
-Todd C.

-----Original Message-----
From: lheisey@... [mailto:lheisey@...]
Sent: Thursday, November 15, 2001 7:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Novell... losing mapped drive to Vantage


Would anyone know why a workstation would continually lose its mapped
drive to Vantage? I really can not see what the problem is.



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1701098.3252983.1269402/D=egroupweb/S=17050071
83:HM/A=812074/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
0>

<http://us.adserver.yahoo.com/l?M=212180.1701098.3252983.1269402/D=egroupmai
l/S=1705007183:HM/A=812074/rand=265051903>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
5
the drive is V, win98SE, a login script that does not include the mapping to
vantage. Just a mapped drive from Novell.

-----Original Message-----
From: Dunn, Nancy [mailto:ndunn@...]
Sent: Thursday, November 15, 2001 8:01 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Novell... losing mapped drive to Vantage


What is the Drive letter you are using? And what is the operating system of
the workstation?
Are you using a login script?
Nancy Dunn
Winco Ind.

-----Original Message-----
From: lheisey@... [mailto:lheisey@...]
Sent: Thursday, November 15, 2001 8:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Novell... losing mapped drive to Vantage


Would anyone know why a workstation would continually lose its mapped
drive to Vantage? I really can not see what the problem is.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/