Thanks to everyone for their wishes. Best of luck to everyone. I'm signing
off.....
Rick
off.....
Rick
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Good luck.
Mike Tonoyan / All American Products Co.
E-mail: miket@...
Mike Tonoyan / All American Products Co.
E-mail: miket@...
----- Original Message -----
From: "Rick Spriggle" <rspriggle@...>
To: <vantage@yahoogroups.com>
Sent: Wednesday, September 25, 2002 9:46 AM
Subject: [Vantage] Leaving the group
> I just wanted to let everyone know that I will be leaving the group soon.
> Friday is my last day at Dauphin Graphics, then I will heading to
Tennessee,
> giving up this IT stuff and going back into engineering. I'd like to
thank
> everyone who has offered me assistance, both on and off the group, and
hope
> that I have been assistance to others as well.
>
> On a final note, the manufacturer I will be working for has a very old DOS
> based ERP system and was looking to upgrade in the near future.
So.....you
> might not have seen the last of me yet!!!
>
> Rick
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
Rick,
You've helped me out a lot - I appreciate it. Can't blame you for stepping
across the boundary separating sanity from IT. Tennesee is a pretty place.
Good luck.
Gary Polvinale
Denton ATD
garyp@...
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
You've helped me out a lot - I appreciate it. Can't blame you for stepping
across the boundary separating sanity from IT. Tennesee is a pretty place.
Good luck.
Gary Polvinale
Denton ATD
garyp@...
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Rick,
Its always sad when you loose a counterpart. We'll certainly miss your
participation, I'm sure if your new employer wants some honest evaluation
"here" is where to go. Plus, you have a leg up if you do go to Vantage.
Good Luck and best wishes.
Shirley
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to
Tennessee,
giving up this IT stuff and going back into engineering. I'd like to
thank
everyone who has offered me assistance, both on and off the group, and
hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future.
So.....you
might not have seen the last of me yet!!!
Rick
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Its always sad when you loose a counterpart. We'll certainly miss your
participation, I'm sure if your new employer wants some honest evaluation
"here" is where to go. Plus, you have a leg up if you do go to Vantage.
Good Luck and best wishes.
Shirley
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to
Tennessee,
giving up this IT stuff and going back into engineering. I'd like to
thank
everyone who has offered me assistance, both on and off the group, and
hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future.
So.....you
might not have seen the last of me yet!!!
Rick
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Good Luck.
Mark
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Mark
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Good Luck Rick!
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 11:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 11:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Rick,
Sorry to have you go. I trust you and yours will be better off in your next venture.
God Bless you.
Troy Funte
Liberty Electronics
Sorry to have you go. I trust you and yours will be better off in your next venture.
God Bless you.
Troy Funte
Liberty Electronics
----- Original Message -----
From: Rick Spriggle
To: vantage@yahoogroups.com
Sent: Wednesday, September 25, 2002 12:46 PM
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Hi Rick
Hope your move gets you what you want.
I too am moving on to pastures new this Friday and I'd like to echo your
sentiments regarding this group. I am in no doubt that a good percentage of
what I achieved implementing and running Vantage and Report Builder at
Professional Welding is down to the people who have been, or still are
members of the group - thank you for sharing your knowledge, something I
know to be hard earned.
The Company I'm joining as Production Director is only a year old and has
urgent need of process control, so I too may be back!!!!
My best wishes to you all.
Chris Reed
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 5:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Hope your move gets you what you want.
I too am moving on to pastures new this Friday and I'd like to echo your
sentiments regarding this group. I am in no doubt that a good percentage of
what I achieved implementing and running Vantage and Report Builder at
Professional Welding is down to the people who have been, or still are
members of the group - thank you for sharing your knowledge, something I
know to be hard earned.
The Company I'm joining as Production Director is only a year old and has
urgent need of process control, so I too may be back!!!!
My best wishes to you all.
Chris Reed
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 5:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
When it rains it pours. Sorry to see you leaving the group, Chris. Glad you're going where you'll feel needed.
Troy Funte
Liberty Electronics
Troy Funte
Liberty Electronics
----- Original Message -----
From: Chris Reed
To: vantage@yahoogroups.com
Sent: Thursday, September 26, 2002 4:51 AM
Subject: RE: [Vantage] Leaving the group
Hi Rick
Hope your move gets you what you want.
I too am moving on to pastures new this Friday and I'd like to echo your
sentiments regarding this group. I am in no doubt that a good percentage of
what I achieved implementing and running Vantage and Report Builder at
Professional Welding is down to the people who have been, or still are
members of the group - thank you for sharing your knowledge, something I
know to be hard earned.
The Company I'm joining as Production Director is only a year old and has
urgent need of process control, so I too may be back!!!!
My best wishes to you all.
Chris Reed
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 5:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Chris / Rick,
It's been a pleasure gentlemen ... good luck !
Todd Anderson
-----Original Message-----
From: Chris Reed [mailto:chrisr@...]
Sent: Thursday, September 26, 2002 3:51 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Leaving the group
Hi Rick
Hope your move gets you what you want.
I too am moving on to pastures new this Friday and I'd like to echo your
sentiments regarding this group. I am in no doubt that a good percentage of
what I achieved implementing and running Vantage and Report Builder at
Professional Welding is down to the people who have been, or still are
members of the group - thank you for sharing your knowledge, something I
know to be hard earned.
The Company I'm joining as Production Director is only a year old and has
urgent need of process control, so I too may be back!!!!
My best wishes to you all.
Chris Reed
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 5:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/M=221745.2287884.3710693.2225243/D=egroupweb/S=17050071
83:HM/A=1207826/R=0/*http://www.buywirelessnow.com/sonyericsson/handset_T68i
.asp>
<http://us.adserver.yahoo.com/l?M=221745.2287884.3710693.2225243/D=egroupmai
l/S=:HM/A=1207826/rand=105427174>
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
It's been a pleasure gentlemen ... good luck !
Todd Anderson
-----Original Message-----
From: Chris Reed [mailto:chrisr@...]
Sent: Thursday, September 26, 2002 3:51 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Leaving the group
Hi Rick
Hope your move gets you what you want.
I too am moving on to pastures new this Friday and I'd like to echo your
sentiments regarding this group. I am in no doubt that a good percentage of
what I achieved implementing and running Vantage and Report Builder at
Professional Welding is down to the people who have been, or still are
members of the group - thank you for sharing your knowledge, something I
know to be hard earned.
The Company I'm joining as Production Director is only a year old and has
urgent need of process control, so I too may be back!!!!
My best wishes to you all.
Chris Reed
-----Original Message-----
From: Rick Spriggle [mailto:rspriggle@...]
Sent: Wednesday, September 25, 2002 5:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Leaving the group
I just wanted to let everyone know that I will be leaving the group soon.
Friday is my last day at Dauphin Graphics, then I will heading to Tennessee,
giving up this IT stuff and going back into engineering. I'd like to thank
everyone who has offered me assistance, both on and off the group, and hope
that I have been assistance to others as well.
On a final note, the manufacturer I will be working for has a very old DOS
based ERP system and was looking to upgrade in the near future. So.....you
might not have seen the last of me yet!!!
Rick
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/M=221745.2287884.3710693.2225243/D=egroupweb/S=17050071
83:HM/A=1207826/R=0/*http://www.buywirelessnow.com/sonyericsson/handset_T68i
.asp>
<http://us.adserver.yahoo.com/l?M=221745.2287884.3710693.2225243/D=egroupmai
l/S=:HM/A=1207826/rand=105427174>
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Rick,
Good luck in your new venture.
Mike Tonoyan / All American Products Co.
E-mail: miket@...
Good luck in your new venture.
Mike Tonoyan / All American Products Co.
E-mail: miket@...
----- Original Message -----
From: "Chris Reed" <chrisr@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, September 26, 2002 1:51 AM
Subject: RE: [Vantage] Leaving the group
> Hi Rick
>
> Hope your move gets you what you want.
>
> I too am moving on to pastures new this Friday and I'd like to echo your
> sentiments regarding this group. I am in no doubt that a good percentage
of
> what I achieved implementing and running Vantage and Report Builder at
> Professional Welding is down to the people who have been, or still are
> members of the group - thank you for sharing your knowledge, something I
> know to be hard earned.
>
> The Company I'm joining as Production Director is only a year old and has
> urgent need of process control, so I too may be back!!!!
>
> My best wishes to you all.
>
> Chris Reed
>
> -----Original Message-----
> From: Rick Spriggle [mailto:rspriggle@...]
> Sent: Wednesday, September 25, 2002 5:46 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Leaving the group
>
>
> I just wanted to let everyone know that I will be leaving the group soon.
> Friday is my last day at Dauphin Graphics, then I will heading to
Tennessee,
> giving up this IT stuff and going back into engineering. I'd like to
thank
> everyone who has offered me assistance, both on and off the group, and
hope
> that I have been assistance to others as well.
>
> On a final note, the manufacturer I will be working for has a very old DOS
> based ERP system and was looking to upgrade in the near future.
So.....you
> might not have seen the last of me yet!!!
>
> Rick
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>