I am looking for a report builder report that is a labor edit report.
It will show subtotals by week and break them into regular and overtime
hours.
It was sent to me several years ago and we forwarded to several other
people who requested the report, however, it has been lost somewhere in
that never never land of our database.
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]
Sent: Wednesday, September 07, 2005 6:47 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Digest Number 3469
------------------------ Yahoo! Groups Sponsor --------------------~-->
Most low income households are not online. Help bridge the digital
divide today!
http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/PhFolB/TM
--------------------------------------------------------------------~->
There are 17 messages in this issue.
Topics in this digest:
1. RE: Job Completion not completing ops
From: "Jasper Recto" <jrecto@...>
2. RE: mass change subcontract vendor in BOM
From: "Frank Zeigafuse" <fzeigafuse@...>
3. Re: Job Completion not completing ops
From: "brychanwilliams" <brychanw@...>
4. Re: mass change subcontract vendor in BOM
From: "brychanwilliams" <brychanw@...>
5. RE: Daily Backlog
From: "Thomas Wojewoda" <twojewoda@...>
6. Plant Floor Data Entry (6.0.525)
From: "Richard Bailey" <rbailey@...>
7. Re: Daily Backlog
From: "brychanwilliams" <brychanw@...>
8. RE: Plant Floor Data Entry (6.0.525)
From: "Aaron Hoyt" <aaron.hoyt@...>
9. RE: Re: Daily Backlog
From: "Thomas Wojewoda" <twojewoda@...>
10. PartWhse.OnHandQty
From: "RICH WAGNER" <rwagner@...>
11. RE: PartWhse.OnHandQty
From: "Mike Lowe" <MLowe@...>
12. RE: PartWhse.OnHandQty
From: "RICH WAGNER" <rwagner@...>
13. Using Global Alerts
From: "dblchin88" <kylechin@...>
14. RE: Using Global Alerts
From: "Aaron Hoyt" <aaron.hoyt@...>
15. AP Checks
From: "how2wow" <mhow@...>
16. 6.1: Spanish AP Checks
From: jeremyrleonard@...
17. Handheld computer for Tool Crib
From: melissa hietala <kevmel822@...>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Tue, 6 Sep 2005 08:09:04 -0400
From: "Jasper Recto" <jrecto@...>
Subject: RE: Job Completion not completing ops
I've also seen this happen but never found a reason for it!
-----Original Message-----
From: brychanwilliams [mailto:brychanw@...]
Sent: Tuesday, September 06, 2005 3:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Job Completion not completing ops
Hi,
I was just wondering whether anybody has seen this before;
My understanding was that when you complete a job then it will
automatically mark all operations as completed. I can see that this is
not always the case. It seems to happen with sub-con ops and some
backflush operations.
thanks
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Tue, 6 Sep 2005 08:19:02 -0400
From: "Frank Zeigafuse" <fzeigafuse@...>
Subject: RE: mass change subcontract vendor in BOM
And you will get to pay for it when and if you decide to upgrades.
Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...
Visit www.one.org to see how the world can be changed one person at a
time.
-----Original Message-----
From: Dave Miller [mailto:dave.miller2@...]
Sent: Friday, September 02, 2005 6:01 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] mass change subcontract vendor in BOM
I have contacted Vantage Support several times regarding mass
updates/changes and the only method that they are suggesting is through
their Custom Solutions Department. I contacted them and they are
extremely
high in price and lead time is a minimum of 8 weeks. I currently use
Michael Barry from Aspacia Systems Inc. for these changes. 866-566-9600.
It will show subtotals by week and break them into regular and overtime
hours.
It was sent to me several years ago and we forwarded to several other
people who requested the report, however, it has been lost somewhere in
that never never land of our database.
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]
Sent: Wednesday, September 07, 2005 6:47 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Digest Number 3469
------------------------ Yahoo! Groups Sponsor --------------------~-->
Most low income households are not online. Help bridge the digital
divide today!
http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/PhFolB/TM
--------------------------------------------------------------------~->
There are 17 messages in this issue.
Topics in this digest:
1. RE: Job Completion not completing ops
From: "Jasper Recto" <jrecto@...>
2. RE: mass change subcontract vendor in BOM
From: "Frank Zeigafuse" <fzeigafuse@...>
3. Re: Job Completion not completing ops
From: "brychanwilliams" <brychanw@...>
4. Re: mass change subcontract vendor in BOM
From: "brychanwilliams" <brychanw@...>
5. RE: Daily Backlog
From: "Thomas Wojewoda" <twojewoda@...>
6. Plant Floor Data Entry (6.0.525)
From: "Richard Bailey" <rbailey@...>
7. Re: Daily Backlog
From: "brychanwilliams" <brychanw@...>
8. RE: Plant Floor Data Entry (6.0.525)
From: "Aaron Hoyt" <aaron.hoyt@...>
9. RE: Re: Daily Backlog
From: "Thomas Wojewoda" <twojewoda@...>
10. PartWhse.OnHandQty
From: "RICH WAGNER" <rwagner@...>
11. RE: PartWhse.OnHandQty
From: "Mike Lowe" <MLowe@...>
12. RE: PartWhse.OnHandQty
From: "RICH WAGNER" <rwagner@...>
13. Using Global Alerts
From: "dblchin88" <kylechin@...>
14. RE: Using Global Alerts
From: "Aaron Hoyt" <aaron.hoyt@...>
15. AP Checks
From: "how2wow" <mhow@...>
16. 6.1: Spanish AP Checks
From: jeremyrleonard@...
17. Handheld computer for Tool Crib
From: melissa hietala <kevmel822@...>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Tue, 6 Sep 2005 08:09:04 -0400
From: "Jasper Recto" <jrecto@...>
Subject: RE: Job Completion not completing ops
I've also seen this happen but never found a reason for it!
-----Original Message-----
From: brychanwilliams [mailto:brychanw@...]
Sent: Tuesday, September 06, 2005 3:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Job Completion not completing ops
Hi,
I was just wondering whether anybody has seen this before;
My understanding was that when you complete a job then it will
automatically mark all operations as completed. I can see that this is
not always the case. It seems to happen with sub-con ops and some
backflush operations.
thanks
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Tue, 6 Sep 2005 08:19:02 -0400
From: "Frank Zeigafuse" <fzeigafuse@...>
Subject: RE: mass change subcontract vendor in BOM
And you will get to pay for it when and if you decide to upgrades.
Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...
Visit www.one.org to see how the world can be changed one person at a
time.
-----Original Message-----
From: Dave Miller [mailto:dave.miller2@...]
Sent: Friday, September 02, 2005 6:01 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] mass change subcontract vendor in BOM
I have contacted Vantage Support several times regarding mass
updates/changes and the only method that they are suggesting is through
their Custom Solutions Department. I contacted them and they are
extremely
high in price and lead time is a minimum of 8 weeks. I currently use
Michael Barry from Aspacia Systems Inc. for these changes. 866-566-9600.
----- Original Message -----
From: progress92000
To: vantage@yahoogroups.com
Sent: Thursday, September 01, 2005 2:54 PM
Subject: [Vantage] mass change subcontract vendor in BOM
Hi Group,
Is there any utility or way to do the mass change of vendor in BOM?
Thanks,
Nam
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
SPONSORED LINKS Membership database software Database mortgage
software
Pda database software
Database management software Database marketing software
Online
database software
------------------------------------------------------------------------
----
--
YAHOO! GROUPS LINKS
a.. Visit your group "vantage" on the web.
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
------------------------------------------------------------------------
----
--
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Tue, 06 Sep 2005 13:04:16 -0000
From: "brychanwilliams" <brychanw@...>
Subject: Re: Job Completion not completing ops
Jasper,
thanks, do you anything to 'clear' things up?
--- In vantage@yahoogroups.com, "Jasper Recto" <jrecto@l...> wrote:
> I've also seen this happen but never found a reason for it!
>
> -----Original Message-----
> From: brychanwilliams [mailto:brychanw@h...]
> Sent: Tuesday, September 06, 2005 3:42 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Job Completion not completing ops
>
>
> Hi,
>
> I was just wondering whether anybody has seen this before;
>
> My understanding was that when you complete a job then it will
> automatically mark all operations as completed. I can see that
this is
> not always the case. It seems to happen with sub-con ops and some
> backflush operations.
>
> thanks
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Tue, 06 Sep 2005 13:08:27 -0000
From: "brychanwilliams" <brychanw@...>
Subject: Re: mass change subcontract vendor in BOM
Maybe you could look at their data import tools, these can update
records based on certain criterium.
When we implemented 6.1 from scratch I needed to some things like
this. I don't know if these are available to established users...
Hope this helps.
--- In vantage@yahoogroups.com, "Frank Zeigafuse" <fzeigafuse@l...>
wrote:
> And you will get to pay for it when and if you decide to upgrades.
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@L...
>
> Visit www.one.org to see how the world can be changed one person
at a time.
>
>
>
> -----Original Message-----
> From: Dave Miller [mailto:dave.miller2@c...]
> Sent: Friday, September 02, 2005 6:01 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] mass change subcontract vendor in BOM
>
>
> I have contacted Vantage Support several times regarding mass
> updates/changes and the only method that they are suggesting is
through
> their Custom Solutions Department. I contacted them and they are
extremely
> high in price and lead time is a minimum of 8 weeks. I currently
use
> Michael Barry from Aspacia Systems Inc. for these changes. 866-566-
9600.
> ----- Original Message -----
> From: progress92000
> To: vantage@yahoogroups.com
> Sent: Thursday, September 01, 2005 2:54 PM
> Subject: [Vantage] mass change subcontract vendor in BOM
>
>
> Hi Group,
>
> Is there any utility or way to do the mass change of vendor in
BOM?
>
> Thanks,
>
> Nam
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
>
>
> SPONSORED LINKS Membership database software Database mortgage
software
> Pda database software
> Database management software Database marketing software
Online
> database software
>
>
> -------------------------------------------------------------------
---------
> --
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "vantage" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of
> Service.
>
>
> -------------------------------------------------------------------
---------
> --
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Tue, 6 Sep 2005 08:32:46 -0500
From: "Thomas Wojewoda" <twojewoda@...>
Subject: RE: Daily Backlog
So no one has an editable version of the daily backlog report?
Please help, I'm having a terrible time figuring out how do this from
scratch.
Thomas Wojewoda
V6.10
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Thomas Wojewoda
Sent: Thursday, September 01, 2005 3:05 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Daily Backlog
Does anyone have a good daily backlog report? I tried getting the one
available in Vantage, but it looks like it's not that easy. This one is
actually not in the Report Style.
Vantage 6.1.whatever the newest patch is.
Thomas Wojewoda
IS Manager
Principal Manufacturing Corp.
2800 South 19th Ave
60155 Broadview IL
phone: (708) 865 7500 ext 544
fax: (708) 865 7632
cell: (708) 259 4864
http://www.principalmfg.com
********************
This transmission may contain information that is privileged,
confidential and/or exempt from disclosure under applicable law. If you
are not the intended recipient, you are hereby notified that any
disclosure, copying, distribution, or use of the information contained
herein (including any reliance thereon) is STRICTLY PROHIBITED. If you
received this transmission in error, please immediately contact the
sender and destroy the material in its entirety, whether in electronic
or hard copy format. Thank you.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Tue, 6 Sep 2005 15:42:31 +0100
From: "Richard Bailey" <rbailey@...>
Subject: Plant Floor Data Entry (6.0.525)
We're finally moving to Shop Floor Data Capture.
We've bar coded Employees, Job Travellers etc etc.
We're using a Wasp CCD Scanner and individual reads are great.
Here's the question.
Is there a way of getting Vantage to interpret a combined/concatenated
code?
We'd like the operators to scan a single code to Start Production
Activity.
The code will be a concatenation of Job, Assembly and OpSeq rather than
3
separate entries.
I know that $I equates to TAB and have constructed a code which reads
*123456$I0$I10* where 123456 is the job, 0 the Assembly and 10 the
OpSeq.
The problem is that Vantage reads the entire value into the Job Number
field
rather than separating into its 3 constituent parts.
Am I asking the impossible or am I missing something obvious?
As always, all help gratefully received
Regards,
Richard
Richard Bailey
Dudley Industries
Mailto: rbailey@...
Tel: +44(0)1253 738311
Mob: +44(0)7836 550360
Fax: +44(0)870 7628173
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Tue, 06 Sep 2005 14:58:53 -0000
From: "brychanwilliams" <brychanw@...>
Subject: Re: Daily Backlog
Ok, what you are actually wanting to see/report on.
--- In vantage@yahoogroups.com, "Thomas Wojewoda" <twojewoda@p...>
wrote:
> So no one has an editable version of the daily backlog report?
> Please help, I'm having a terrible time figuring out how do this
from
> scratch.
>
> Thomas Wojewoda
>
> V6.10
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of Thomas Wojewoda
> Sent: Thursday, September 01, 2005 3:05 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Daily Backlog
>
> Does anyone have a good daily backlog report? I tried getting the
one
> available in Vantage, but it looks like it's not that easy. This
one is
> actually not in the Report Style.
>
> Vantage 6.1.whatever the newest patch is.
>
> Thomas Wojewoda
> IS Manager
> Principal Manufacturing Corp.
> 2800 South 19th Ave
> 60155 Broadview IL
> phone: (708) 865 7500 ext 544
> fax: (708) 865 7632
> cell: (708) 259 4864
> http://www.principalmfg.com
>
>
>
> ********************
> This transmission may contain information that is privileged,
> confidential and/or exempt from disclosure under applicable law.
If you
> are not the intended recipient, you are hereby notified that any
> disclosure, copying, distribution, or use of the information
contained
> herein (including any reliance thereon) is STRICTLY PROHIBITED. If
you
> received this transmission in error, please immediately contact the
> sender and destroy the material in its entirety, whether in
electronic
> or hard copy format. Thank you.
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Tue, 6 Sep 2005 11:00:28 -0400
From: "Aaron Hoyt" <aaron.hoyt@...>
Subject: RE: Plant Floor Data Entry (6.0.525)
Richard,
The answer is in the barcode reader. You need to enable the "extended
code
39" barcode. The reader does the translation.
Good luck,
Aaron Hoyt
Vantage Plastics
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Richard Bailey
Sent: Tuesday, September 06, 2005 10:43 AM
To: UserGroup
Subject: [Vantage] Plant Floor Data Entry (6.0.525)
We're finally moving to Shop Floor Data Capture.
We've bar coded Employees, Job Travellers etc etc.
We're using a Wasp CCD Scanner and individual reads are great.
Here's the question.
Is there a way of getting Vantage to interpret a combined/concatenated
code?
We'd like the operators to scan a single code to Start Production
Activity.
The code will be a concatenation of Job, Assembly and OpSeq rather than
3
separate entries.
I know that $I equates to TAB and have constructed a code which reads
*123456$I0$I10* where 123456 is the job, 0 the Assembly and 10 the
OpSeq.
The problem is that Vantage reads the entire value into the Job Number
field
rather than separating into its 3 constituent parts.
Am I asking the impossible or am I missing something obvious?
As always, all help gratefully received
Regards,
Richard
Richard Bailey
Dudley Industries
Mailto: rbailey@...
Tel: +44(0)1253 738311
Mob: +44(0)7836 550360
Fax: +44(0)870 7628173
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 9
Date: Tue, 6 Sep 2005 10:14:40 -0500
From: "Thomas Wojewoda" <twojewoda@...>
Subject: RE: Re: Daily Backlog
The daily order backlog, but I need to modify it so it has a filter by
customer service rep.
Thomas Wojewoda
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of brychanwilliams
Sent: Tuesday, September 06, 2005 9:59 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Daily Backlog
Ok, what you are actually wanting to see/report on.
--- In vantage@yahoogroups.com, "Thomas Wojewoda" <twojewoda@p...>
wrote:
> So no one has an editable version of the daily backlog report?
> Please help, I'm having a terrible time figuring out how do this
from
> scratch.
>
> Thomas Wojewoda
>
> V6.10
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of Thomas Wojewoda
> Sent: Thursday, September 01, 2005 3:05 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Daily Backlog
>
> Does anyone have a good daily backlog report? I tried getting the
one
> available in Vantage, but it looks like it's not that easy. This
one is
> actually not in the Report Style.
>
> Vantage 6.1.whatever the newest patch is.
>
> Thomas Wojewoda
> IS Manager
> Principal Manufacturing Corp.
> 2800 South 19th Ave
> 60155 Broadview IL
> phone: (708) 865 7500 ext 544
> fax: (708) 865 7632
> cell: (708) 259 4864
> http://www.principalmfg.com
>
>
>
> ********************
> This transmission may contain information that is privileged,
> confidential and/or exempt from disclosure under applicable law.
If you
> are not the intended recipient, you are hereby notified that any
> disclosure, copying, distribution, or use of the information
contained
> herein (including any reliance thereon) is STRICTLY PROHIBITED. If
you
> received this transmission in error, please immediately contact the
> sender and destroy the material in its entirety, whether in
electronic
> or hard copy format. Thank you.
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 10
Date: Tue, 6 Sep 2005 11:44:59 -0400
From: "RICH WAGNER" <rwagner@...>
Subject: PartWhse.OnHandQty
I have a BAM setup that alerts us when the PartWhse.OnHandQty goes below
the PartPlant.MinimumQty. The email alert always indicates the correct
MinimumQty but the OnHandQty is not always correct.
Sometimes on a STK-STK Transaction the alert gives me the transacted
quantity where I should get the OnHandQty. Other times I get the
amount in one bin even though the Part is in multiple bins.
I am unsure how to troubleshoot this. Can anyone tell me how the
OnHandQty is calculated and could Vantage possible be putting a
temporary value in the OnHandQty until it is properly calculated?
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 11
Date: Tue, 6 Sep 2005 08:49:58 -0700
From: "Mike Lowe" <MLowe@...>
Subject: RE: PartWhse.OnHandQty
Try PartBin instead of PartWhse.
Mike
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of RICH WAGNER
Sent: Tuesday, September 06, 2005 8:45 AM
To: vantage@yahoogroups.com
Subject: [Vantage] PartWhse.OnHandQty
I have a BAM setup that alerts us when the PartWhse.OnHandQty goes below
the PartPlant.MinimumQty. The email alert always indicates the correct
MinimumQty but the OnHandQty is not always correct.
Sometimes on a STK-STK Transaction the alert gives me the transacted
quantity where I should get the OnHandQty. Other times I get the
amount in one bin even though the Part is in multiple bins.
I am unsure how to troubleshoot this. Can anyone tell me how the
OnHandQty is calculated and could Vantage possible be putting a
temporary value in the OnHandQty until it is properly calculated?
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
_____
YAHOO! GROUPS LINKS
* Visit your group " vantage
<http://groups.yahoo.com/group/vantage> " on the web.
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
_____
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 12
Date: Tue, 6 Sep 2005 11:55:11 -0400
From: "RICH WAGNER" <rwagner@...>
Subject: RE: PartWhse.OnHandQty
PartBin does not give me the total in my warehouse.
_____
From: Mike Lowe [mailto:MLowe@...]
Sent: Tuesday, September 06, 2005 11:50 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] PartWhse.OnHandQty
Try PartBin instead of PartWhse.
Mike
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of RICH WAGNER
Sent: Tuesday, September 06, 2005 8:45 AM
To: vantage@yahoogroups.com
Subject: [Vantage] PartWhse.OnHandQty
I have a BAM setup that alerts us when the PartWhse.OnHandQty goes below
the PartPlant.MinimumQty. The email alert always indicates the correct
MinimumQty but the OnHandQty is not always correct.
Sometimes on a STK-STK Transaction the alert gives me the transacted
quantity where I should get the OnHandQty. Other times I get the
amount in one bin even though the Part is in multiple bins.
I am unsure how to troubleshoot this. Can anyone tell me how the
OnHandQty is calculated and could Vantage possible be putting a
temporary value in the OnHandQty until it is properly calculated?
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
_____
YAHOO! GROUPS LINKS
* Visit your group " vantage
<http://groups.yahoo.com/group/vantage> " on the web.
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
_____
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
_____
YAHOO! GROUPS LINKS
* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
_____
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 13
Date: Tue, 06 Sep 2005 15:58:19 -0000
From: "dblchin88" <kylechin@...>
Subject: Using Global Alerts
Please let me know how or if anyone has experienced this problem and
has a solution. We would like to use Global Alerts to send emails to
the respective parties to let them know if changes have been made or
require their attention (ie. inventory, ECO changes, etc.). We don't
host our own email exchange and utilize an outside service. In
addition, we connect through SBC as our smtp server. Therefore, in
order to connect to SBC server, we need to use an authentication
process which is currently not part of the functionality of Vantage
6.1. The supposed workaround is to then use the virtual smtp server
from the microsoft server to act as the go-between. Unfortunately, all
the messages get stuck in the queue in the server because SBC doesn't
like something about the messages sent by Vantage and drops the
connection. Thanks for any help.
________________________________________________________________________
________________________________________________________________________
Message: 14
Date: Tue, 6 Sep 2005 12:23:41 -0400
From: "Aaron Hoyt" <aaron.hoyt@...>
Subject: RE: Using Global Alerts
You are not alone. What SBC does not like is the LF.LF. vs. the correct
format of CR LF. CR LF. For ending emails.
Epicor has stuck their head in the sand on this issue and has refused to
acknowledge a problem. The answer is "Microsoft accepts it" and
therefore
my request to have this changed has been refused several times.
Your only alternative that I am aware of is to set up a mail server for
yourself and use it. I have done this now with two companies. If I am
not
mistaken the problem is specifically Qmail refusing to accept the faulty
mail. With SBC I am sure you are not going to get them to change, so
taking
it over yourself or finding another that can host you that does not use
Qmail are the only options.
Please do submit the problem to Support though. The more people that
report
this as unacceptable the better.
Good luck,
Aaron Hoyt
Vantage Plastics
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of dblchin88
Sent: Tuesday, September 06, 2005 11:58 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Using Global Alerts
Please let me know how or if anyone has experienced this problem and
has a solution. We would like to use Global Alerts to send emails to
the respective parties to let them know if changes have been made or
require their attention (ie. inventory, ECO changes, etc.). We don't
host our own email exchange and utilize an outside service. In
addition, we connect through SBC as our smtp server. Therefore, in
order to connect to SBC server, we need to use an authentication
process which is currently not part of the functionality of Vantage
6.1. The supposed workaround is to then use the virtual smtp server
from the microsoft server to act as the go-between. Unfortunately, all
the messages get stuck in the queue in the server because SBC doesn't
like something about the messages sent by Vantage and drops the
connection. Thanks for any help.
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
________________________________________________________________________
________________________________________________________________________
Message: 15
Date: Tue, 06 Sep 2005 17:02:42 -0000
From: "how2wow" <mhow@...>
Subject: AP Checks
We just went live with Vantage 8 this last week! The CFO is wanting
the invoice date (along with invoice number, amount etc) to print on
the check stubs. I went into Crystal to make this change but there
does not seem to be an invoice date field in the APTran or CheckHed
file. Does anyone already have a customized form out there for this?
If so, could you share what file you used or e-mail me a template?
________________________________________________________________________
________________________________________________________________________
Message: 16
Date: Tue, 06 Sep 2005 13:45:29 -0400
From: jeremyrleonard@...
Subject: 6.1: Spanish AP Checks
Hello,
We are trying to do without purchasing the Spanish Translation of
Vantage. When printing AP Checks, the amount in words are in English.
I was able to use the ToWords function in Crystal to generate the Amount
In Words but it is still in English, even if I set my system to Spanish.
It looks like I need to purchase the Spanish Edition of Crystal Reports
Professional to get the Spanish version of the dll that is used in the
ToWords function.
If I do this, how do I run English and Spanish on the same server?
Does anyone have a better work around? I am going to have to repeat
this same thing with German?
Does anyone know if I did purchase the Spanish Translation from Epicor,
would it generate the correct Amount in Words for the AP Checks?
I can't find any reference to the words to be translated in the
translation screen?
Thanks
Jeremy
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 17
Date: Tue, 6 Sep 2005 14:11:00 -0700 (PDT)
From: melissa hietala <kevmel822@...>
Subject: Handheld computer for Tool Crib
We are looking at setting up our tool crib with a security portal that
would help us increase the accuracy of the tool crib area. What we want
to do is set up a hand held unit with Vantage 6.1 on it to make
available to employees who need to check out tools when the tool crib
manager is not available. This hand held would need to be set up so that
they could do the invty transactions as needed. Currently we have a bar
code system to check tools out. Can we just load a client program on the
hand held or is there a separate data collection module we need to
utilize?
Any direction or ideas would be greatly appreciated...
Melissa
---------------------------------
Click here to donate to the Hurricane Katrina relief effort.
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
------------------------------------------------------------------------
Yahoo! Groups Links
------------------------------------------------------------------------