FW: Printing in Epicor 9.05.600C - just completed firs

Yahoo Archive
1
Thank you all for your help!
----- Original Message -----
From: Brian Roberts
To: vantage@yahoogroups.com
Sent: Thursday, October 28, 2010 8:38 AM
Subject: RE: FW: [Vantage] Printing in Epicor 9.05.600C - just completed first pass conversion from 6.1



Looks like the formatting of that little table didn't make it through
the email. Let me try again:

Live Training Test Pilot

Progress Database 9400 9410 9420 9430

System App Server 9401 9411 9421 9431

Process App Server 9402 9412 9422 9432

Task App Server 9403 9413 9423 9433

SQL Database 9450 9460 9470 9480

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brian Roberts
Sent: Thursday, October 28, 2010 8:18 AM
To: vantage@yahoogroups.com
Subject: RE: FW: [Vantage] Printing in Epicor 9.05.600C - just completed
first pass conversion from 6.1

I just did a recent clean install of 9.05.600C using an MSSQL database.
I couldn't find a summary anywhere, so I wrote down the port numbers
from PET. Hope this helps.

[snip]
________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Drew Patterson
Sent: Thursday, October 28, 2010 6:43 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: Re: FW: [Vantage] Printing in Epicor 9.05.600C - just completed
first pass conversion from 6.1

closer - still need a bit more guidance if you can.

I need to compare this one with the ports in the progress explorer. But
there are multiple app servers for each database, each with their own
port (there are 4 total ports for pilot alone - 16+ ports in all). There
are also two fields within Epicor to enter these port numbers. I need to
know which app server port number (from the 4+ total) goes into which of
each of the two fields in System mgmt > system utils > system agents

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
2
In addition to what Mark W. said:
Is the username and password you are using in system agent correct?
Are the ports in system agent correct for the DB you are using?

Jim

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Mark Wonsil
Sent: Wednesday, October 27, 2010 10:01 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Printing in Epicor 9.05.600C - just completed
first pass conversion from 6.1

Are ALL three appServers running? In the System Agent, make sure that
they're pointing to the correct servers/ports.

Do you have the most recent Crystal Run-time installed?

Mark W.

On Wed, Oct 27, 2010 at 10:22 AM, drewpatterson83 <dpatt78@...>
wrote:

>
>
> In version 9, when I try to print a standard report ( in this case it
was a
> GL report) and I attempt a print preview, the action works, but I
don't get
> a preview. A message shows at the bottom of the screen that the print
> preview was submitted successfully.
>
> Same situation, but instead of print preview, I just submit it for
printing
> directly, the action completes, a message says it was successful, but
I
> don't get the report.
>
> Anyone experience this and have any suggestions?
>
> Drew
>
>
>


[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
3
Thanks for the quick reply and questions. I havent had a chance to try
cooner_55421 suggestions yet.

My answers and some additional help if reasonable:


- Are ALL three appServers running? YES
- In the System Agent, make sure that they're pointing to the correct
servers/ports. How (specifically)
- Do you have the most recent Crystal Run-time installed? YES
- Is the username and password you are using in system agent correct? YES
- Are the ports in system agent correct for the DB you are using? How
(specifically)


On Wed, Oct 27, 2010 at 11:40 AM, cooner_55421 <cooner_55421@...>wrote:

>
>
> I just did a test upgrade from 8.03 to 9.05.
> Printing worked after a few changes.
>
> Stop the ProcessServer and TaskAgent
> In Vantage go to the system agent and:
> --- change 8.03 servers/server:paths/ports to your 9.05 settings
> - username and password was still OK for my converted database
> Then
> - restarting appServers wasn't enough for me, printing still didn't want to
> fire.
> When I finally rebooted server, all my previously submitted print jobs
> started firing.
>
>
> --- In vantage@yahoogroups.com <vantage%40yahoogroups.com>, "Moore, Jim
> (Anniston)" <james.moore@...> wrote:
> >
> > In addition to what Mark W. said:
> > Is the username and password you are using in system agent correct?
> > Are the ports in system agent correct for the DB you are using?
> >
> > Jim
> >
> > -----Original Message-----
> > From: vantage@yahoogroups.com <vantage%40yahoogroups.com> [mailto:
> vantage@yahoogroups.com <vantage%40yahoogroups.com>] On Behalf
> > Of Mark Wonsil
> > Sent: Wednesday, October 27, 2010 10:01 AM
> > To: vantage@yahoogroups.com <vantage%40yahoogroups.com>
> > Subject: Re: [Vantage] Printing in Epicor 9.05.600C - just completed
> > first pass conversion from 6.1
> >
> > Are ALL three appServers running? In the System Agent, make sure that
> > they're pointing to the correct servers/ports.
> >
> > Do you have the most recent Crystal Run-time installed?
> >
> > Mark W.
> >
> > On Wed, Oct 27, 2010 at 10:22 AM, drewpatterson83 <dpatt78@...>
>
> > wrote:
> >
> > >
> > >
> > > In version 9, when I try to print a standard report ( in this case it
> > was a
> > > GL report) and I attempt a print preview, the action works, but I
> > don't get
> > > a preview. A message shows at the bottom of the screen that the print
> > > preview was submitted successfully.
> > >
> > > Same situation, but instead of print preview, I just submit it for
> > printing
> > > directly, the action completes, a message says it was successful, but
> > I
> > > don't get the report.
> > >
> > > Anyone experience this and have any suggestions?
> > >
> > > Drew
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> > have already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder
> > and Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
>
>
>


[Non-text portions of this message have been removed]
4
> Â - Are the ports in system agent correct for the DB you are using? How
> Â (specifically)

System Management | System Utilities | System Agent

The appserver URIs are in the format: appDC://servername:port

Mark W.
5
closer - still need a bit more guidance if you can.

I need to compare this one with the ports in the progress explorer. But there are multiple app servers for each database, each with their own port (there are 4 total ports for pilot alone - 16+ ports in all). There are also two fields within Epicor to enter these port numbers. I need to know which app server port number (from the 4+ total) goes into which of each of the two fields in System mgmt > system utils > system agents

----- Original Message -----
From: Mark Wonsil
To: vantage@yahoogroups.com
Sent: Wednesday, October 27, 2010 1:24 PM
Subject: Re: FW: [Vantage] Printing in Epicor 9.05.600C - just completed first pass conversion from 6.1



> - Are the ports in system agent correct for the DB you are using? How
> (specifically)

System Management | System Utilities | System Agent

The appserver URIs are in the format: appDC://servername:port

Mark W.




[Non-text portions of this message have been removed]
6
I just did a recent clean install of 9.05.600C using an MSSQL database.
I couldn't find a summary anywhere, so I wrote down the port numbers
from PET. Hope this helps.



In my System Agent Maintenance, my training env "Task AppServer -
AppServer URL" is" AppServerDC://localhost:9413", and "System AppServer
- AppServer URL" is "AppServerDC://localhost:9411". I think attachments
are blocked, so contact me off-list if a few screenshots would help.



Brian.







Live

Training

Test

Pilot

Progress Database

9400

9410

9420

9430

System App Server

9401

9411

9421

9431

Process App Server

9402

9412

9422

9432

Task App Server

9403

9413

9423

9433

SQL Database

9450

9460

9470

9480









________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Drew Patterson
Sent: Thursday, October 28, 2010 6:43 AM
To: vantage@yahoogroups.com
Subject: Re: FW: [Vantage] Printing in Epicor 9.05.600C - just completed
first pass conversion from 6.1





closer - still need a bit more guidance if you can.

I need to compare this one with the ports in the progress explorer. But
there are multiple app servers for each database, each with their own
port (there are 4 total ports for pilot alone - 16+ ports in all). There
are also two fields within Epicor to enter these port numbers. I need to
know which app server port number (from the 4+ total) goes into which of
each of the two fields in System mgmt > system utils > system agents

----- Original Message -----
From: Mark Wonsil
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Sent: Wednesday, October 27, 2010 1:24 PM
Subject: Re: FW: [Vantage] Printing in Epicor 9.05.600C - just completed
first pass conversion from 6.1

> - Are the ports in system agent correct for the DB you are using? How
> (specifically)

System Management | System Utilities | System Agent

The appserver URIs are in the format: appDC://servername:port

Mark W.

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
7
Looks like the formatting of that little table didn't make it through
the email. Let me try again:



Live Training Test Pilot

Progress Database 9400 9410 9420 9430

System App Server 9401 9411 9421 9431

Process App Server 9402 9412 9422 9432

Task App Server 9403 9413 9423 9433

SQL Database 9450 9460 9470 9480



________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brian Roberts
Sent: Thursday, October 28, 2010 8:18 AM
To: vantage@yahoogroups.com
Subject: RE: FW: [Vantage] Printing in Epicor 9.05.600C - just completed
first pass conversion from 6.1



I just did a recent clean install of 9.05.600C using an MSSQL database.
I couldn't find a summary anywhere, so I wrote down the port numbers
from PET. Hope this helps.

[snip]
________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Drew Patterson
Sent: Thursday, October 28, 2010 6:43 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: Re: FW: [Vantage] Printing in Epicor 9.05.600C - just completed
first pass conversion from 6.1

closer - still need a bit more guidance if you can.

I need to compare this one with the ports in the progress explorer. But
there are multiple app servers for each database, each with their own
port (there are 4 total ports for pilot alone - 16+ ports in all). There
are also two fields within Epicor to enter these port numbers. I need to
know which app server port number (from the 4+ total) goes into which of
each of the two fields in System mgmt > system utils > system agents






[Non-text portions of this message have been removed]