Epicor 905.606.A AP Conversion issue

Yahoo Archive
1
We use a Conversion factor of Roll to feet (1 Roll x 1000 = 1000 Feet). Purchase in Roll, inventoried in Feet. The item is received and inventoried correct and the Unit Material Cost is correct. In the General Ledger, it's taking the conversion and multiplying by 1000)to come up with $1,700,000.  I was told there might be a fix to this,, does anyone know of one?  Â
Thank you in advance,
Jacqueline


[Non-text portions of this message have been removed]
2
I have a report that shows all materials that have been issued to a job. The report uses the parttran records. However, most of our material is issued using an MES console and the parttran record only reflects the User (which is the station name) and not the employee that was using the station. Anyone have a way of tracking back to the employee who performed the transaction?

This is on 9.05.606

Tom Christie
Manufacturing Engineer

AGM Container Controls
3526 E Ft. Lowell Road
Tucson, AZ 85716

PH: 520-881-2130
EM: Tchristie@...



[Non-text portions of this message have been removed]
3
Do you have employees attached to individual user logins?

Sent from my Android powered by Cellcom



[Non-text portions of this message have been removed]
4
We do not for the production employees, only for the office workers who actually use the main client. The funny thing is MES requires both a user and an employee ID number to perform transactions. It ought to be available somewhere to know what Employee ID perform the transaction.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Joshua Serwe
Sent: Friday, November 30, 2012 9:10 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: MES User vs Employee on PartTran



Do you have employees attached to individual user logins?

Sent from my Android powered by Cellcom

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
5
We ended up giving people in the stockroom their own login. We started
with a generic stockroom login but, could tell who was making the material
transaction.



It was be nice if Epicor was consistent. When you log onto a labor
transaction via MES - it records the employee. When doing a material
transaction - it takes the login of the person who initially logged into MES
- example Stockroom.







From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Tom J. Christie
Sent: Friday, November 30, 2012 9:01 AM
To: vantage@yahoogroups.com
Subject: [Vantage] MES User vs Employee on PartTran





I have a report that shows all materials that have been issued to a job. The
report uses the parttran records. However, most of our material is issued
using an MES console and the parttran record only reflects the User (which
is the station name) and not the employee that was using the station. Anyone
have a way of tracking back to the employee who performed the transaction?

This is on 9.05.606

Tom Christie
Manufacturing Engineer

AGM Container Controls
3526 E Ft. Lowell Road
Tucson, AZ 85716

PH: 520-881-2130
EM: Tchristie@... <mailto:Tchristie%40agmcontainer.com>

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
6
That is exactly the issue. I can build a customization to record it, but want to make sure Epicor is being inconsistent and it is not just me missing the data.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Cathy
Sent: Friday, November 30, 2012 10:30 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] MES User vs Employee on PartTran



We ended up giving people in the stockroom their own login. We started
with a generic stockroom login but, could tell who was making the material
transaction.

It was be nice if Epicor was consistent. When you log onto a labor
transaction via MES - it records the employee. When doing a material
transaction - it takes the login of the person who initially logged into MES
- example Stockroom.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
Tom J. Christie
Sent: Friday, November 30, 2012 9:01 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] MES User vs Employee on PartTran

I have a report that shows all materials that have been issued to a job. The
report uses the parttran records. However, most of our material is issued
using an MES console and the parttran record only reflects the User (which
is the station name) and not the employee that was using the station. Anyone
have a way of tracking back to the employee who performed the transaction?

This is on 9.05.606

Tom Christie
Manufacturing Engineer

AGM Container Controls
3526 E Ft. Lowell Road
Tucson, AZ 85716

PH: 520-881-2130
EM: Tchristie@...<mailto:Tchristie%40agmcontainer.com> <mailto:Tchristie%40agmcontainer.com>

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
7
I have found this problem here where I am working now and the last place I worked (both used Epicor or Vantage).
I just finished filling call 3101922ESC with Epicor and I was told that short of another enhancement request (not a bug) they cannot find any other reports of this issue.

If you are current on your Maintenance, please report this, apparently they are not aware that this is a problem and it's driving my Inventory & Production folks nuts since they do not have a good audit trail.

-Rick Bird
IT Software Administrator
Rowmark, LLC.
Epicor 9.05.700b2

--- In vantage@yahoogroups.com, "Tom J. Christie" <tchristie@...> wrote:
>
> That is exactly the issue. I can build a customization to record it, but want to make sure Epicor is being inconsistent and it is not just me missing the data.
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Cathy
> Sent: Friday, November 30, 2012 10:30 AM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] MES User vs Employee on PartTran
>
>
>
> We ended up giving people in the stockroom their own login. We started
> with a generic stockroom login but, could tell who was making the material
> transaction.
>
> It was be nice if Epicor was consistent. When you log onto a labor
> transaction via MES - it records the employee. When doing a material
> transaction - it takes the login of the person who initially logged into MES
> - example Stockroom.
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
> Tom J. Christie
> Sent: Friday, November 30, 2012 9:01 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] MES User vs Employee on PartTran
>
> I have a report that shows all materials that have been issued to a job. The
> report uses the parttran records. However, most of our material is issued
> using an MES console and the parttran record only reflects the User (which
> is the station name) and not the employee that was using the station. Anyone
> have a way of tracking back to the employee who performed the transaction?
>
> This is on 9.05.606
>
> Tom Christie
> Manufacturing Engineer
>
> AGM Container Controls
> 3526 E Ft. Lowell Road
> Tucson, AZ 85716
>
> PH: 520-881-2130
> EM: Tchristie@...<mailto:Tchristie%40agmcontainer.com> <mailto:Tchristie%40agmcontainer.com>
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>
8
I saw this is in the release notes for 701.

SCR 93962
Job Receipt to Inventory - PartTran table is not updated in the EmpID
field, if Mfgreceipt (HH and MES) is performed by employee.



On Thu, Feb 28, 2013 at 7:55 AM, that_guyy <rbird@...> wrote:

> **
>
>
> I have found this problem here where I am working now and the last place I
> worked (both used Epicor or Vantage).
> I just finished filling call 3101922ESC with Epicor and I was told that
> short of another enhancement request (not a bug) they cannot find any other
> reports of this issue.
>
> If you are current on your Maintenance, please report this, apparently
> they are not aware that this is a problem and it's driving my Inventory &
> Production folks nuts since they do not have a good audit trail.
>
> -Rick Bird
> IT Software Administrator
> Rowmark, LLC.
> Epicor 9.05.700b2
>
> --- In vantage@yahoogroups.com, "Tom J. Christie" wrote:
> >
> > That is exactly the issue. I can build a customization to record it, but
> want to make sure Epicor is being inconsistent and it is not just me
> missing the data.
> >
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> Behalf Of Cathy
> > Sent: Friday, November 30, 2012 10:30 AM
> > To: vantage@yahoogroups.com
> > Subject: RE: [Vantage] MES User vs Employee on PartTran
> >
> >
> >
> > We ended up giving people in the stockroom their own login. We started
> > with a generic stockroom login but, could tell who was making the
> material
> > transaction.
> >
> > It was be nice if Epicor was consistent. When you log onto a labor
> > transaction via MES - it records the employee. When doing a material
> > transaction - it takes the login of the person who initially logged into
> MES
> > - example Stockroom.
> >
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> Behalf Of
> > Tom J. Christie
> > Sent: Friday, November 30, 2012 9:01 AM
> > To: vantage@yahoogroups.com
> > Subject: [Vantage] MES User vs Employee on PartTran
> >
> > I have a report that shows all materials that have been issued to a job.
> The
> > report uses the parttran records. However, most of our material is issued
> > using an MES console and the parttran record only reflects the User
> (which
> > is the station name) and not the employee that was using the station.
> Anyone
> > have a way of tracking back to the employee who performed the
> transaction?
> >
> > This is on 9.05.606
> >
> > Tom Christie
> > Manufacturing Engineer
> >
> > AGM Container Controls
> > 3526 E Ft. Lowell Road
> > Tucson, AZ 85716
> >
> > PH: 520-881-2130
> > EM: Tchristie@...
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>


[Non-text portions of this message have been removed]
9
We use 905.606.A and I have a call in for that exact problem. Both for the HH and MES. Â
 I was told I'd be notified when the enhancement/ BUG will be fixed, that was 6 + months ago.
Â


________________________________
From: Scotty K. <scottyk537@...>
To: vantage@yahoogroups.com
Sent: Thursday, February 28, 2013 2:47 PM
Subject: Re: [Vantage] Re: MES User vs Employee on PartTran

I saw this is in the release notes for 701.

SCR 93962
Job Receipt to Inventory - PartTran table is not updated in the EmpID
field, if Mfgreceipt (HH and MES) is performed by employee.



On Thu, Feb 28, 2013 at 7:55 AM, that_guyy <rbird@...> wrote:

> **
>
>
> I have found this problem here where I am working now and the last place I
> worked (both used Epicor or Vantage).
> I just finished filling call 3101922ESC with Epicor and I was told that
> short of another enhancement request (not a bug) they cannot find any other
> reports of this issue.
>
> If you are current on your Maintenance, please report this, apparently
> they are not aware that this is a problem and it's driving my Inventory &
> Production folks nuts since they do not have a good audit trail.
>
> -Rick Bird
> IT Software Administrator
> Rowmark, LLC.
> Epicor 9.05.700b2
>
> --- In vantage@yahoogroups.com, "Tom J. Christie" wrote:
> >
> > That is exactly the issue. I can build a customization to record it, but
> want to make sure Epicor is being inconsistent and it is not just me
> missing the data.
> >
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> Behalf Of Cathy
> > Sent: Friday, November 30, 2012 10:30 AM
> > To: vantage@yahoogroups.com
> > Subject: RE: [Vantage] MES User vs Employee on PartTran
> >
> >
> >
> > We ended up giving people in the stockroom their own login. We started
> > with a generic stockroom login but, could tell who was making the
> material
> > transaction.
> >
> > It was be nice if Epicor was consistent. When you log onto a labor
> > transaction via MES - it records the employee. When doing a material
> > transaction - it takes the login of the person who initially logged into
> MES
> > - example Stockroom.
> >
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> Behalf Of
> > Tom J. Christie
> > Sent: Friday, November 30, 2012 9:01 AM
> > To: vantage@yahoogroups.com
> > Subject: [Vantage] MES User vs Employee on PartTran
> >
> > I have a report that shows all materials that have been issued to a job.
> The
> > report uses the parttran records. However, most of our material is issued
> > using an MES console and the parttran record only reflects the User
> (which
> > is the station name) and not the employee that was using the station.
> Anyone
> > have a way of tracking back to the employee who performed the
> transaction?
> >
> > This is on 9.05.606
> >
> > Tom Christie
> > Manufacturing Engineer
> >
> > AGM Container Controls
> > 3526 E Ft. Lowell Road
> > Tucson, AZ 85716
> >
> > PH: 520-881-2130
> > EM: Tchristie@...
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>Â
>


[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note:Â You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.%c2%a0
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links



[Non-text portions of this message have been removed]