Eng.Workbench-Can't check part backin

Yahoo Archive
1
Hi Group

EPicor changed the functionality between 5.2 and 6.00

You now need to check that the completed date in the group header ids
filled in

Gary Parfrey

-----Original Message-----
From: Erica Steffens (IS) [mailto:ESteffens@...]
Sent: 25 September 2003 19:25
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Eng.Workbench-Can't check part backin


Did he mark it as approved before trying to check it back in?



Erica A. Steffens

Business Systems Analyst

Synovis IS/PE/Caribe



-----Original Message-----
From: Thomas Ford [mailto:tom.ford@...]
Sent: Thursday, September 25, 2003 11:31 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Eng.Workbench-Can't check part backin



First day on 6.0. Engineer checked part out, updated part, then went
to check it in but only option was to undo check out which leaves the
part unapproved. The engineer was doing it the same way he had done
it yesterday in 5.2. Is there a different procedure in 6.0 for the
engineering workbench? Any insight would be greatly appreciated.






Yahoo! Groups Sponsor



ADVERTISEMENT

<
http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=17050
071
83:HM/A=1706996/R=0/SIG=11p5b9ris/*http:/www.ediets.com/start.cfm?code=3
0509
&media=atkins> click here



<
http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroup
mai
l/S=:HM/A=1706996/rand=982261951>


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
< http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
< http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
< http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo!
< http://docs.yahoo.com/info/terms/> Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=1705
007183:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?c
ode=30509&media=atkins> click here

<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egrou
pmail/S=:HM/A=1732161/rand=419015037>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

_______________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet.




[Non-text portions of this message have been removed]
2
First day on 6.0. Engineer checked part out, updated part, then went
to check it in but only option was to undo check out which leaves the
part unapproved. The engineer was doing it the same way he had done
it yesterday in 5.2. Is there a different procedure in 6.0 for the
engineering workbench? Any insight would be greatly appreciated.
3
Check Permissions. I know we got caught with this one on our last trial
run.

Good Luck,
Aaron Hoyt
Design Standards

-----Original Message-----
From: Thomas Ford [mailto:tom.ford@...]
Sent: Thursday, September 25, 2003 12:31 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Eng.Workbench-Can't check part backin


First day on 6.0. Engineer checked part out, updated part, then went
to check it in but only option was to undo check out which leaves the
part unapproved. The engineer was doing it the same way he had done
it yesterday in 5.2. Is there a different procedure in 6.0 for the
engineering workbench? Any insight would be greatly appreciated.



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
4
Did he mark it as approved before trying to check it back in?



Erica A. Steffens

Business Systems Analyst

Synovis IS/PE/Caribe



-----Original Message-----
From: Thomas Ford [mailto:tom.ford@...]
Sent: Thursday, September 25, 2003 11:31 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Eng.Workbench-Can't check part backin



First day on 6.0. Engineer checked part out, updated part, then went
to check it in but only option was to undo check out which leaves the
part unapproved. The engineer was doing it the same way he had done
it yesterday in 5.2. Is there a different procedure in 6.0 for the
engineering workbench? Any insight would be greatly appreciated.






Yahoo! Groups Sponsor



ADVERTISEMENT

<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=17050071
83:HM/A=1706996/R=0/SIG=11p5b9ris/*http:/www.ediets.com/start.cfm?code=30509
&media=atkins> click here



<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupmai
l/S=:HM/A=1706996/rand=982261951>


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



[Non-text portions of this message have been removed]