E 9.05 - BPMs - Post Processing Directives

Yahoo Archive
1
All good input, thanks for the suggestions everyone. I'll get the code
posted up here later tonight; traveling right now.


I *did* try to enable the dependent post processing directive from a
Pre-processing directive... I think that's all there is to it.


Maybe Rob hit the nail on the head.... I *am* using RowMod conditions in my
code. I innocently cut-and-pasted the working code from the PRE directive
right into the POST directive. Maybe that's all this issue is.


I haven't used Data Dir





-----Original Message-----
From: Rob Bucek <rbucek@...>
To: "'vantage@yahoogroups.com'" <vantage@yahoogroups.com>
Date: Tue, 13 Aug 2013 16:31:04 +0000
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives








Yeah, he never mentioned his conditions tho...

Hey vic-post your code dufus

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid: 1.234354861@...]<http://www.dsmfg.com/>
(Click the logo to view our site)< http://www.dsmfg.com/>

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Joe Englert
Sent: Tuesday, August 13, 2013 11:22 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

That makes sense but, I was thinking from what Vic said that the post BPM
wasn't firing.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of Rob
Bucek
Sent: Tuesday, August 13, 2013 12:18 PM
To: 'vantage@yahoogroups.com <mailto:%26%2339%3Bvantage%40yahoogroups.com>'
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Maybe it depends on your conditions.. if youre using rowmod status for
instance, I always thought there isn't one in the post process phase..

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid: 1.234354861@...
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
(Click the logo to view our site)< http://www.dsmfg.com/>

From: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On
Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:13 AM
To: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Did you do that as a workaround or did you need that enable post
functionality? Is there a reason you can think of why a post proc wouldn't
fire when a pre-proc does? I haven't run into that.

-----Original Message-----
From: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>]
On Behalf Of Jose Gomez
Sent: Tuesday, August 13, 2013 12:01 PM
To: Vantage
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives

I did this exact same thing last week, I did a PreProc to enable PostProc
and worked like a top

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...
<mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com>
http://www.josecgomez.com
< http://www.linkedin.com/in/josecgomez> < http://www.facebook.com/josegomez>
< http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
< http://www.josecgomez.com/professional-resume/>
< http://www.josecgomez.com/feed/>
< http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <rbucek@...
<mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com>>
wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid: 1.234354861@...
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>]
On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process directive?
> I have seen this used in BPMs where a post-process never fired by itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: calvin@...
<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:
> calvin@...
<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com>>
> http://www.codabears.com <http://www.codabears.com/>
> [cid: image001.jpg@01CE980F.A050E2F0
<mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a large
> number of electrons were terribly inconvenienced."
>
> From: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto:
> vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>]
On Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
> the lovely TranGLC table back into PORel. The BPM works flawlessly only
> when updating an existing PO. If I'm entering a NEW purchase order, the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
> *post* processing directive on the same BO and I cannot even get the darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<
http://groups.yahoo.com/group/vantage/files/><
http://groups.yahoo.com/group/vantage/files/><
http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]
2
I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
the lovely TranGLC table back into PORel. The BPM works flawlessly only
when updating an existing PO. If I'm entering a NEW purchase order, the
Pre-Processing directive doesn't work for obvious reason.. the record
doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
*post* processing directive on the same BO and I cannot even get the darn
BPM to fire now. Is there something tricky about getting a post-proc
directive to fire if there is no pre-proc directive on the same BO?



TIA.





Vic





[Non-text portions of this message have been removed]
3
You could probably create a DataDirective for TranGLC to check when a new record is added and if it is related to PORel, then copy necessary information to the PO.



________________________________
From: Vic Drecchio <vic.drecchio@...>
To: Vantage Yahoo <vantage@yahoogroups.com>
Sent: Tuesday, August 13, 2013 10:51 AM
Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives


I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
the lovely TranGLC table back into PORel. The BPM works flawlessly only
when updating an existing PO. If I'm entering a NEW purchase order, the
Pre-Processing directive doesn't work for obvious reason.. the record
doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
*post* processing directive on the same BO and I cannot even get the darn
BPM to fire now. Is there something tricky about getting a post-proc
directive to fire if there is no pre-proc directive on the same BO?



TIA.





Vic





[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note:Â You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links



[Non-text portions of this message have been removed]
4
Or maybe try to move it to the Post of the TranGLCJournal.GetNewTranGLCDtl?

In answer to your question though, if the trace shows the method firing, you shouldn't have to do anything with the Pre side in order to get the Post side to fire. Of course, it's Epicor so anything is possible.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Ted Koch
Sent: Tuesday, August 13, 2013 11:01 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives



You could probably create a DataDirective for TranGLC to check when a new record is added and if it is related to PORel, then copy necessary information to the PO.

________________________________
From: Vic Drecchio <vic.drecchio@...<mailto:vic.drecchio%40swepcotube.com>>
To: Vantage Yahoo <vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>>
Sent: Tuesday, August 13, 2013 10:51 AM
Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives


I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
the lovely TranGLC table back into PORel. The BPM works flawlessly only
when updating an existing PO. If I'm entering a NEW purchase order, the
Pre-Processing directive doesn't work for obvious reason.. the record
doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
*post* processing directive on the same BO and I cannot even get the darn
BPM to fire now. Is there something tricky about getting a post-proc
directive to fire if there is no pre-proc directive on the same BO?

TIA.

Vic

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
5
Vic -

Have you tried using the pre-process to enable a post-process directive?
I have seen this used in BPMs where a post-process never fired by itself.

Thank you in advance,
Calvin Dekker
Office: 630-672-7688 Ext. 1484
Email: calvin@...<mailto:calvin@...>
http://www.codabears.com<http://www.codabears.com/>
[cid:image001.jpg@01CE980F.A050E2F0]<http://www.codabears.com/>

Solutions for Epiday living.

"No trees were harmed during the sending of this message, however a large number of electrons were terribly inconvenienced."

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Vic Drecchio
Sent: Tuesday, August 13, 2013 9:51 AM
To: Vantage Yahoo
Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives



I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
the lovely TranGLC table back into PORel. The BPM works flawlessly only
when updating an existing PO. If I'm entering a NEW purchase order, the
Pre-Processing directive doesn't work for obvious reason.. the record
doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
*post* processing directive on the same BO and I cannot even get the darn
BPM to fire now. Is there something tricky about getting a post-proc
directive to fire if there is no pre-proc directive on the same BO?

TIA.

Vic

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
6
You can also store info in the bpm callcontextdata in the preprocess and use it to look up records in the post if you need to...

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:1.234354861@...]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Calvin Dekker
Sent: Tuesday, August 13, 2013 10:27 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives



Vic -

Have you tried using the pre-process to enable a post-process directive?
I have seen this used in BPMs where a post-process never fired by itself.

Thank you in advance,
Calvin Dekker
Office: 630-672-7688 Ext. 1484
Email: calvin@...<mailto:calvin%40codabears.com><mailto:calvin@...<mailto:calvin%40codabears.com>>
http://www.codabears.com<http://www.codabears.com/>
[cid:image001.jpg@01CE980F.A050E2F0<mailto:image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>

Solutions for Epiday living.

"No trees were harmed during the sending of this message, however a large number of electrons were terribly inconvenienced."

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of Vic Drecchio
Sent: Tuesday, August 13, 2013 9:51 AM
To: Vantage Yahoo
Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives

I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
the lovely TranGLC table back into PORel. The BPM works flawlessly only
when updating an existing PO. If I'm entering a NEW purchase order, the
Pre-Processing directive doesn't work for obvious reason.. the record
doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
*post* processing directive on the same BO and I cannot even get the darn
BPM to fire now. Is there something tricky about getting a post-proc
directive to fire if there is no pre-proc directive on the same BO?

TIA.

Vic

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
7
I did this exact same thing last week, I did a PreProc to enable PostProc
and worked like a top


*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*


On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <rbucek@...> wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid:1.234354861@...]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process directive?
> I have seen this used in BPMs where a post-process never fired by itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: calvin@...<mailto:calvin%40codabears.com><mailto:
> calvin@...<mailto:calvin%40codabears.com>>
> http://www.codabears.com<http://www.codabears.com/>
> [cid:image001.jpg@01CE980F.A050E2F0<mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a large
> number of electrons were terribly inconvenienced."
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:
> vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
> the lovely TranGLC table back into PORel. The BPM works flawlessly only
> when updating an existing PO. If I'm entering a NEW purchase order, the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
> *post* processing directive on the same BO and I cannot even get the darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]
8
Did you do that as a workaround or did you need that enable post functionality? Is there a reason you can think of why a post proc wouldn't fire when a pre-proc does? I haven't run into that.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez
Sent: Tuesday, August 13, 2013 12:01 PM
To: Vantage
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives

I did this exact same thing last week, I did a PreProc to enable PostProc
and worked like a top


*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*


On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <rbucek@...> wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid:1.234354861@...]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process directive?
> I have seen this used in BPMs where a post-process never fired by itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: calvin@...<mailto:calvin%40codabears.com><mailto:
> calvin@...<mailto:calvin%40codabears.com>>
> http://www.codabears.com<http://www.codabears.com/>
> [cid:image001.jpg@01CE980F.A050E2F0<mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a large
> number of electrons were terribly inconvenienced."
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:
> vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
> the lovely TranGLC table back into PORel. The BPM works flawlessly only
> when updating an existing PO. If I'm entering a NEW purchase order, the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
> *post* processing directive on the same BO and I cannot even get the darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
9
Maybe it depends on your conditions.. if youre using rowmod status for instance, I always thought there isn't one in the post process phase..

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:1.234354861@...]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:13 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives



Did you do that as a workaround or did you need that enable post functionality? Is there a reason you can think of why a post proc wouldn't fire when a pre-proc does? I haven't run into that.

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of Jose Gomez
Sent: Tuesday, August 13, 2013 12:01 PM
To: Vantage
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives

I did this exact same thing last week, I did a PreProc to enable PostProc
and worked like a top

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...<mailto:jose%40josecgomez.com>
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <rbucek@...<mailto:rbucek%40dsmfg.com>> wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid:1.234354861@...<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process directive?
> I have seen this used in BPMs where a post-process never fired by itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: calvin@...<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:
> calvin@...<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com>>
> http://www.codabears.com<http://www.codabears.com/>
> [cid:image001.jpg@01CE980F.A050E2F0<mailto:image001.jpg%4001CE980F.A050E2F0><mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a large
> number of electrons were terribly inconvenienced."
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:
> vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
> the lovely TranGLC table back into PORel. The BPM works flawlessly only
> when updating an existing PO. If I'm entering a NEW purchase order, the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
> *post* processing directive on the same BO and I cannot even get the darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links



[Non-text portions of this message have been removed]
10
That makes sense but, I was thinking from what Vic said that the post BPM wasn't firing.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Rob Bucek
Sent: Tuesday, August 13, 2013 12:18 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives



Maybe it depends on your conditions.. if youre using rowmod status for instance, I always thought there isn't one in the post process phase..

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:1.234354861@...<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:13 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Did you do that as a workaround or did you need that enable post functionality? Is there a reason you can think of why a post proc wouldn't fire when a pre-proc does? I haven't run into that.

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of Jose Gomez
Sent: Tuesday, August 13, 2013 12:01 PM
To: Vantage
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives

I did this exact same thing last week, I did a PreProc to enable PostProc
and worked like a top

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...<mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com>
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <rbucek@...<mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com>> wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid:1.234354861@...<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process directive?
> I have seen this used in BPMs where a post-process never fired by itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: calvin@...<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:
> calvin@...<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com>>
> http://www.codabears.com<http://www.codabears.com/>
> [cid:image001.jpg@01CE980F.A050E2F0<mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a large
> number of electrons were terribly inconvenienced."
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:
> vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
> the lovely TranGLC table back into PORel. The BPM works flawlessly only
> when updating an existing PO. If I'm entering a NEW purchase order, the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
> *post* processing directive on the same BO and I cannot even get the darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
11
Yeah, he never mentioned his conditions tho...

Hey vic-post your code dufus

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:1.234354861@...]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:22 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives



That makes sense but, I was thinking from what Vic said that the post BPM wasn't firing.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of Rob Bucek
Sent: Tuesday, August 13, 2013 12:18 PM
To: 'vantage@yahoogroups.com<mailto:%26%2339%3Bvantage%40yahoogroups.com>'
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Maybe it depends on your conditions.. if youre using rowmod status for instance, I always thought there isn't one in the post process phase..

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:1.234354861@...<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:13 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Did you do that as a workaround or did you need that enable post functionality? Is there a reason you can think of why a post proc wouldn't fire when a pre-proc does? I haven't run into that.

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of Jose Gomez
Sent: Tuesday, August 13, 2013 12:01 PM
To: Vantage
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives

I did this exact same thing last week, I did a PreProc to enable PostProc
and worked like a top

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...<mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com>
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <rbucek@...<mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com>> wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid:1.234354861@...<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process directive?
> I have seen this used in BPMs where a post-process never fired by itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: calvin@...<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:
> calvin@...<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com>>
> http://www.codabears.com<http://www.codabears.com/>
> [cid:image001.jpg@01CE980F.A050E2F0<mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a large
> number of electrons were terribly inconvenienced."
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:
> vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
> the lovely TranGLC table back into PORel. The BPM works flawlessly only
> when updating an existing PO. If I'm entering a NEW purchase order, the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
> *post* processing directive on the same BO and I cannot even get the darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
12
Has anyone tried getting this to work using the email template? We are
running into this issue when we use the CallContextData passed through
to a post method directive but would not pass into the email template
method directive.



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Rob Bucek
Sent: Tuesday, August 13, 2013 11:31 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives





Yeah, he never mentioned his conditions tho...

Hey vic-post your code dufus

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:1.234354861@...
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>
]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:22 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

That makes sense but, I was thinking from what Vic said that the post
BPM wasn't firing.

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
On Behalf Of Rob Bucek
Sent: Tuesday, August 13, 2013 12:18 PM
To: 'vantage@yahoogroups.com
<mailto:%26%2339%3Bvantage%40yahoogroups.com>
<mailto:%26%2339%3Bvantage%40yahoogroups.com>'
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Maybe it depends on your conditions.. if youre using rowmod status for
instance, I always thought there isn't one in the post process phase..

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:1.234354861@...
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40
web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On
Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:13 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Did you do that as a workaround or did you need that enable post
functionality? Is there a reason you can think of why a post proc
wouldn't fire when a pre-proc does? I haven't run into that.

-----Original Message-----
From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com>] On Behalf Of Jose Gomez
Sent: Tuesday, August 13, 2013 12:01 PM
To: Vantage
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives

I did this exact same thing last week, I did a PreProc to enable
PostProc
and worked like a top

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@... <mailto:jose%40josecgomez.com>
<mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com><mailto:jose
%40josecgomez.com>
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez>
<http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez>
<http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <rbucek@...
<mailto:rbucek%40dsmfg.com>
<mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com><mailto:rbucek%40d
smfg.com>> wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess
and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid:1.234354861@...
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40
web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yaho
o.com>]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com>] On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process
directive?
> I have seen this used in BPMs where a post-process never fired by
itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: calvin@... <mailto:calvin%40codabears.com>
<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:ca
lvin%40codabears.com><mailto:calvin%40codabears.com><mailto:
> calvin@... <mailto:calvin%40codabears.com>
<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:ca
lvin%40codabears.com><mailto:calvin%40codabears.com>>
> http://www.codabears.com<http://www.codabears.com/>
> [cid:image001.jpg@01CE980F.A050E2F0
<mailto:image001.jpg%4001CE980F.A050E2F0>
<mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F
.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a
large
> number of electrons were terribly inconvenienced."
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto:
> vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On
Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field
from
> the lovely TranGLC table back into PORel. The BPM works flawlessly
only
> when updating an existing PO. If I'm entering a NEW purchase order,
the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for
a
> *post* processing directive on the same BO and I cannot even get the
darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/g
roup/vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
13
I have come across several cases where the post will not fire because the data is not brought forward. I pass data collected from the pre into CallContextBpmData fields and go from there. Works, but not consistently. Off the top of my head w/ out much research, I seem to remember at least one where I had to go at it from a different BO, very round about by the time I got it to work.

Brenda

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Chang, Chia
Sent: Tuesday, August 13, 2013 12:59 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives



Has anyone tried getting this to work using the email template? We are
running into this issue when we use the CallContextData passed through
to a post method directive but would not pass into the email template
method directive.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of Rob Bucek
Sent: Tuesday, August 13, 2013 11:31 AM
To: 'vantage@yahoogroups.com<mailto:%26%2339%3Bvantage%40yahoogroups.com>'
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Yeah, he never mentioned his conditions tho...

Hey vic-post your code dufus

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:1.234354861@...<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>
]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:22 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

That makes sense but, I was thinking from what Vic said that the post
BPM wasn't firing.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
On Behalf Of Rob Bucek
Sent: Tuesday, August 13, 2013 12:18 PM
To: 'vantage@yahoogroups.com<mailto:%26%2339%3Bvantage%40yahoogroups.com>
<mailto:%26%2339%3Bvantage%40yahoogroups.com>
<mailto:%26%2339%3Bvantage%40yahoogroups.com>'
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Maybe it depends on your conditions.. if youre using rowmod status for
instance, I always thought there isn't one in the post process phase..

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:1.234354861@...<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40
web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On
Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:13 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Did you do that as a workaround or did you need that enable post
functionality? Is there a reason you can think of why a post proc
wouldn't fire when a pre-proc does? I haven't run into that.

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com>] On Behalf Of Jose Gomez
Sent: Tuesday, August 13, 2013 12:01 PM
To: Vantage
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives

I did this exact same thing last week, I did a PreProc to enable
PostProc
and worked like a top

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...<mailto:jose%40josecgomez.com> <mailto:jose%40josecgomez.com>
<mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com><mailto:jose
%40josecgomez.com<mailto:jose%0b%40josecgomez.com>>
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez>
<http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez>
<http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <rbucek@...<mailto:rbucek%40dsmfg.com>
<mailto:rbucek%40dsmfg.com>
<mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com><mailto:rbucek%40d
smfg.com<mailto:rbucek%40d%0bsmfg.com>>> wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess
and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid:1.234354861@...<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com>
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40
web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yaho
o.com>]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com>] On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process
directive?
> I have seen this used in BPMs where a post-process never fired by
itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: calvin@...<mailto:calvin%40codabears.com> <mailto:calvin%40codabears.com>
<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:ca
lvin%40codabears.com<mailto:ca%0blvin%40codabears.com>><mailto:calvin%40codabears.com><mailto:
<mailto:%0b>> calvin@...<mailto:calvin%40codabears.com> <mailto:calvin%40codabears.com>
<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:ca
lvin%40codabears.com<mailto:ca%0blvin%40codabears.com>><mailto:calvin%40codabears.com>>
> http://www.codabears.com<http://www.codabears.com/>
> [cid:image001.jpg@01CE980F.A050E2F0<mailto:image001.jpg%4001CE980F.A050E2F0>
<mailto:image001.jpg%4001CE980F.A050E2F0>
<mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F
.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a
large
> number of electrons were terribly inconvenienced."
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto:
> vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mai
lto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On
Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field
from
> the lovely TranGLC table back into PORel. The BPM works flawlessly
only
> when updating an existing PO. If I'm entering a NEW purchase order,
the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for
a
> *post* processing directive on the same BO and I cannot even get the
darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/g
roup/vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
14
In most cases RowMod status will be blank in post-processing Update method. Try below:
1) Add condition with new ttPODetail in Pre-Processing. Store PO number and line in CallContextData in Pre-processing and enable post-processing.  In post-processing, update PORel as always release number will be 1.
2) Add condition with new ttPORel in Pre-processing. Store PO number and line in CallContextData in Pre-processing and enable Post-processing.In post-processing, update PORel as always release number will be the last .
Â
Regards,
Arul
Â

________________________________
From: Rob Bucek <rbucek@...>
To: "'vantage@yahoogroups.com'" <vantage@yahoogroups.com>
Sent: Wednesday, 14 August 2013 2:31 AM
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives


Â

Yeah, he never mentioned his conditions tho...

Hey vic-post your code dufus

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:mailto:1.234354861%40web65412.mail.ac4.yahoo.com]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: mailto:vantage%40yahoogroups.com [mailto:mailto:vantage%40yahoogroups.com] On Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:22 AM
To: mailto:vantage%40yahoogroups.com
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

That makes sense but, I was thinking from what Vic said that the post BPM wasn't firing.

From: mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of Rob Bucek
Sent: Tuesday, August 13, 2013 12:18 PM
To: mailto:%26%2339%3Bvantage%40yahoogroups.com<mailto:%26%2339%3Bvantage%40yahoogroups.com>'
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Maybe it depends on your conditions.. if youre using rowmod status for instance, I always thought there isn't one in the post process phase..

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid:mailto:1.234354861%40web65412.mail.ac4.yahoo.com<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:13 AM
To: mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Did you do that as a workaround or did you need that enable post functionality? Is there a reason you can think of why a post proc wouldn't fire when a pre-proc does? I haven't run into that.

-----Original Message-----
From: mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of Jose Gomez
Sent: Tuesday, August 13, 2013 12:01 PM
To: Vantage
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives

I did this exact same thing last week, I did a PreProc to enable PostProc
and worked like a top

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: mailto:jose%40josecgomez.com<mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com>
http://www.josecgomez.com/
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com/>

*Quis custodiet ipsos custodes?*

On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <mailto:rbucek%40dsmfg.com<mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com>> wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid:mailto:1.234354861%40web65412.mail.ac4.yahoo.com<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process directive?
> I have seen this used in BPMs where a post-process never fired by itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: mailto:calvin%40codabears.com<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:
> mailto:calvin%40codabears.com<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com>>
> http://www.codabears.com/<http://www.codabears.com/>
> [cid:mailto:image001.jpg%4001CE980F.A050E2F0<mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a large
> number of electrons were terribly inconvenienced."
>
> From: mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto:
> mailto:vantage%40yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
> the lovely TranGLC table back into PORel. The BPM works flawlessly only
> when updating an existing PO. If I'm entering a NEW purchase order, the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
> *post* processing directive on the same BO and I cannot even get the darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/<http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/vantage/files/><http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]
15
All good input, thanks for the suggestions everyone. I'll get the code
posted up here later tonight; traveling right now.


I *did* try to enable the dependent post processing directive from a
Pre-processing directive... I think that's all there is to it.


Maybe Rob hit the nail on the head.... I *am* using RowMod conditions in my
code. I innocently cut-and-pasted the working code from the PRE directive
right into the POST directive. Maybe that's all this issue is. I'll give
that a try.


I haven't used Data Directives before... They sound like my SQL Triggers.
Perhaps that's a better route for this task.


Thanks again!!





-----Original Message-----
From: Rob Bucek <rbucek@...>
To: "'vantage@yahoogroups.com'" <vantage@yahoogroups.com>
Date: Tue, 13 Aug 2013 16:31:04 +0000
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives








Yeah, he never mentioned his conditions tho...

Hey vic-post your code dufus

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid: 1.234354861@...]<http://www.dsmfg.com/>
(Click the logo to view our site)< http://www.dsmfg.com/>

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Joe Englert
Sent: Tuesday, August 13, 2013 11:22 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

That makes sense but, I was thinking from what Vic said that the post BPM
wasn't firing.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:
vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of Rob
Bucek
Sent: Tuesday, August 13, 2013 12:18 PM
To: 'vantage@yahoogroups.com <mailto:%26%2339%3Bvantage%40yahoogroups.com>'
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Maybe it depends on your conditions.. if youre using rowmod status for
instance, I always thought there isn't one in the post process phase..

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-4832
FAX: (715)284-4084
[cid: 1.234354861@...
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
(Click the logo to view our site)< http://www.dsmfg.com/>

From: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>] On
Behalf Of Joe Englert
Sent: Tuesday, August 13, 2013 11:13 AM
To: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives

Did you do that as a workaround or did you need that enable post
functionality? Is there a reason you can think of why a post proc wouldn't
fire when a pre-proc does? I haven't run into that.

-----Original Message-----
From: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>]
On Behalf Of Jose Gomez
Sent: Tuesday, August 13, 2013 12:01 PM
To: Vantage
Subject: Re: [Vantage] E 9.05 - BPMs - Post Processing Directives

I did this exact same thing last week, I did a PreProc to enable PostProc
and worked like a top

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...
<mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com><mailto:jose%40josecgomez.com>
http://www.josecgomez.com
< http://www.linkedin.com/in/josecgomez> < http://www.facebook.com/josegomez>
< http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
< http://www.josecgomez.com/professional-resume/>
< http://www.josecgomez.com/feed/>
< http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, Aug 13, 2013 at 11:57 AM, Rob Bucek <rbucek@...
<mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com><mailto:rbucek%40dsmfg.com>>
wrote:

> **
>
>
> You can also store info in the bpm callcontextdata in the preprocess and
> use it to look up records in the post if you need to...
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-4832
> FAX: (715)284-4084
> [cid: 1.234354861@...
<mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com><mailto:1.234354861%40web65412.mail.ac4.yahoo.com>]<http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>]
On Behalf
> Of Calvin Dekker
> Sent: Tuesday, August 13, 2013 10:27 AM
> To: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
>
> Vic -
>
> Have you tried using the pre-process to enable a post-process directive?
> I have seen this used in BPMs where a post-process never fired by itself.
>
> Thank you in advance,
> Calvin Dekker
> Office: 630-672-7688 Ext. 1484
> Email: calvin@...
<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:
> calvin@...
<mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com><mailto:calvin%40codabears.com>>
> http://www.codabears.com <http://www.codabears.com/>
> [cid: image001.jpg@01CE980F.A050E2F0
<mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:image001.jpg%4001CE980F.A050E2F0><mailto:
> image001.jpg%4001CE980F.A050E2F0>]<http://www.codabears.com/>
>
>
> Solutions for Epiday living.
>
> "No trees were harmed during the sending of this message, however a large
> number of electrons were terribly inconvenienced."
>
> From: vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
[mailto:
> vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>]
On Behalf Of
> Vic Drecchio
>
> Sent: Tuesday, August 13, 2013 9:51 AM
> To: Vantage Yahoo
> Subject: [Vantage] E 9.05 - BPMs - Post Processing Directives
>
> I have a *Pre*-Processing BPM on PO.Update that simply copies a field from
> the lovely TranGLC table back into PORel. The BPM works flawlessly only
> when updating an existing PO. If I'm entering a NEW purchase order, the
> Pre-Processing directive doesn't work for obvious reason.. the record
> doesn't yet exist in TranGLC. it hasn't written it yet. So I opted for a
> *post* processing directive on the same BO and I cannot even get the darn
> BPM to fire now. Is there something tricky about getting a post-proc
> directive to fire if there is no pre-proc directive on the same BO?
>
> TIA.
>
> Vic
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.<
http://groups.yahoo.com/group/vantage/files/><
http://groups.yahoo.com/group/vantage/files/><
http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]