Ask and you shall receive - bye bye ...
_____
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Violet Tant
Sent: Friday, June 10, 2005 3:47 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Digest Number 3359
Please remove my email address from your files. I do not wish to receive
anymore emails from you. This is the second request to you.
_____
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Violet Tant
Sent: Friday, June 10, 2005 3:47 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Digest Number 3359
Please remove my email address from your files. I do not wish to receive
anymore emails from you. This is the second request to you.
----- Original Message -----
From: <vantage@yahoogroups.com>
To: <vantage@yahoogroups.com>
Sent: Friday, June 10, 2005 2:48 PM
Subject: [Vantage] Digest Number 3359
> There are 25 messages in this issue.
>
> Topics in this digest:
>
> 1. Commercial Invoices
> From: "fselliott2" <fselliott2@...>
> 2. RE: Poll results for vantage
> From: "Lepley, Scott A." <sal@...>
> 3. RE: OT: IT Storage
> From: "Juliet Martin" <jmartin@...>
> 4. RE: Commercial Invoices
> From: "Lepley, Scott A." <sal@...>
> 5. RE: Poll results for vantage
> From: "Shirley Graver" <shirleyg@...>
> 6. RE: Poll results for vantage
> From: "Todd Caughey" <caugheyt@...>
> 7. RE: OT: IT Storage
> From: "Frank Zeigafuse" <fzeigafuse@...>
> 8. RE: Data Import / disabling and re-enabing triggers on a table
> From: "Frank Zeigafuse" <fzeigafuse@...>
> 9. Advanced Production Scheduling Module
> From: "kwest_bmc" <kwest@...>
> 10. Vantage Advanced Printing
> From: jeremyrleonard@...
> 11. Production/Std. in operations
> From: "sharma_nalini" <sharma_nalini@...>
> 12. RE: Production/Std. in operations
> From: "Michael D. Howard" <mike@...>
> 13. Re: Production/Std. in operations
> From: "sharma_nalini" <sharma_nalini@...>
> 14. RE: Re: Production/Std. in operations
> From: Lydia Coffman <lcoffman@...>
> 15. Re: Production/Std. in operations
> From: "sharma_nalini" <sharma_nalini@...>
> 16. Re: Production/Std. in operations
> From: Amy OMalley <omall004@...>
> 17. RE: Re: Production/Std. in operations
> From: Lydia Coffman <lcoffman@...>
> 18. Estimating with Vantage 6.1
> From: "PLAMAN DICK" <dick.plaman@...>
> 19. RE: Estimating with Vantage 6.1
> From: "Frank Zeigafuse" <fzeigafuse@...>
> 20. RE: Estimating with Vantage 6.1
> From: "PLAMAN DICK" <dick.plaman@...>
> 21. RE: Estimating with Vantage 6.1
> From: "Frank Zeigafuse" <fzeigafuse@...>
> 22. Re: Estimating with Vantage 6.1
> From: "progress92000" <nvong@...>
> 23. RE: Estimating with Vantage 6.1
> From: "PLAMAN DICK" <dick.plaman@...>
> 24. Vantage 6.1 on windows 98
> From: Matt Sturm <msturm@...>
> 25. Re: Vantage 6.1 on windows 98
> From: jeremyrleonard@...
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 1
> Date: Fri, 10 Jun 2005 12:54:41 -0000
> From: "fselliott2" <fselliott2@...>
> Subject: Commercial Invoices
>
> How do other 6.1 users address commercial invoices? Currently, we use
> a VB form to produce a commercial invoice; it is a direct copy of our
> sales order acknowledgement, with commercial invoice headers, etc.
> Before checking the VB box to print the commercial invoice, our
> customer service reps must change the sales order to add values, etc.,
> (as the original sales order may be for warranty and not have a value
> which is required on a commercial invoice). Then they must change
> everything back on the sales order and hopefully not forget. Some of
> them export the commercial invoice with the original data to a PDF and
> change it there, but this seems cumbersome. Anyone doing something
> better? Thanks.
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 2
> Date: Fri, 10 Jun 2005 09:03:53 -0400
> From: "Lepley, Scott A." <sal@...>
> Subject: RE: Poll results for vantage
>
> 35 votes / 1097 members = 3.2% voter turnout !!!
>
>
>
> It's clear that most of our members reside in the U.S., right? Gee,
> Shirley, maybe you should have done something to generate a little more
> interest, like broadcasting some vicious rhetoric about Vista users...
>
> Regards,
> Scott
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]
> Sent: Friday, June 10, 2005 4:02 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Poll results for vantage
>
>
> The following vantage poll is now closed. Here are the final results:
>
> POLL QUESTION: Should we invite the Vista group to merge with the Vantage
> group?
>
> CHOICES AND RESULTS
> - YES, 19 votes, 54.29%
> - NO, 16 votes, 45.71%
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 3
> Date: Fri, 10 Jun 2005 08:15:37 -0500
> From: "Juliet Martin" <jmartin@...>
> Subject: RE: OT: IT Storage
>
> This was exactly what I was looking for. I have been the sole network
> admin at any place I have worked so I had no frame of reference other
> than my own.
>
> Thank you for your in-depth reply,
>
> Juliet
>
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
> Of Lydia Coffman
> Sent: Thursday, June 09, 2005 2:24 PM
> To: 'vantage@yahoogroups.com'
> Subject: RE: [Vantage] OT: IT Storage
>
>
> For what it is worth: All network software is kept (original packaging)
> in
> a locked file cabinet, filed alphabetically by the name of the software.
> Our hardware system consultant has a book at their site with all software
> info (purchase dates, keys, and so on), so if we had a devastating
> catastrophe, we could still get copies of our software from the
> manufacturer. Fire or earthquake are our two biggest possibilities (So
> California), system folks are far enough away that I can sleep at night.
>
> I have hanging files for each computer system, both the person's name and
> the computer name is on the folder, filed by person's last name. If the
> person leaves, it's easy to change the name and re-file. Filed by
> computer
> name seems logical, but then I have to have a list of what goes with whom.
> Any software, printer install cd's etc that are specific for that system
> are
> filed in that folder. No guessing about whether this is the right printer
> install for that computer. I used to keep all
> printer/monitor/mouse/keyboard etc... filed as Printer/monitor etc. It
> made
> me crazy. Also, all the license info is then filed with each system. We
> officially have no systems on our network that are not Dells, so the
> service
> tag info is with all the other info on the system (including a copy of the
> original packing slip listing amount of memory, type, etc). Dell has all
> of
> this info on their web-site, and you can go in and add user names and so
> on--but if the pie truck hits me on the way to work,
> NO ONE would think of looking on the Dell web site for info.
>
> Each server also has a folder and I keep info about
> service/changes/upgrades
> and so on in there.
>
> It would be great to be paperless, but with the idea that an audit could
> happen, I feel like it's better to have EVERYTHING. This is why computer
> people are such pack-rats -- as soon as you let some paper or CD out of
> your
> clutches, somebody shows up at the door and wants/needs it.
>
> Best thing for me is that NO ONE ELSE digs through the filing cabinets in
> my
> area.
>
> My 2 bits.
> Lydia
>
> -----Original Message-----
> From: Juliet Martin [mailto:jmartin@...]
> Sent: Thursday, June 09, 2005 11:45 AM
> To: VANTAGE@...
> Subject: [Vantage] OT: IT Storage
>
>
> We are looking at implementing an organization system for our Server Room
> and IT storage that (hopefully) will work this time. :-)
>
> What do you keep of your software purchases? Do you keep all the original
> packaging? How do you sort them? Do you sort by software name or by
> pc/department?
>
> Does anyone know of a good product to store CDs? Do you even keep CDs
> with
> the internet being such a wonderful source for new drivers and installs?
>
> Thanks in advance.
>
>
> Juliet Martin
> Information Manager
> Rosenboom Machine & Tool, Inc.
> Sheldon, IA 51201
> 712-324-4854 x1217
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 4
> Date: Fri, 10 Jun 2005 09:17:27 -0400
> From: "Lepley, Scott A." <sal@...>
> Subject: RE: Commercial Invoices
>
> Some old postings from February (appended below) may help you...
>
> Regards,
> Scott
>
> -----Original Message-----
> From: fselliott2 [mailto:fselliott2@...]
> Sent: Friday, June 10, 2005 8:55 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Commercial Invoices
>
>
>
> How do other 6.1 users address commercial invoices? Currently, we use
> a VB form to produce a commercial invoice; it is a direct copy of our
> sales order acknowledgement, with commercial invoice headers, etc.
> Before checking the VB box to print the commercial invoice, our
> customer service reps must change the sales order to add values, etc.,
> (as the original sales order may be for warranty and not have a value
> which is required on a commercial invoice). Then they must change
> everything back on the sales order and hopefully not forget. Some of
> them export the commercial invoice with the original data to a PDF and
> change it there, but this seems cumbersome. Anyone doing something
> better? Thanks.
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]
> Sent: Thursday, February 17, 2005 9:13 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] New file uploaded to vantage
>
>
> Hello,
>
> This email message is a notification to let you know that
> a file has been uploaded to the Files area of the vantage
> group.
>
> File : /SharedReports.PRL
> Uploaded by : kbheec <kbh@...>
> Description : Customs Invoice
>
> You can access this file at the URL:
> http://groups.yahoo.com/group/vantage/files/SharedReports.PRL
> <http://groups.yahoo.com/group/vantage/files/SharedReports.PRL>
>
> To learn more about file sharing for your group, please visit:
> http://help.yahoo.com/help/us/groups/files
> <http://help.yahoo.com/help/us/groups/files>
>
> Regards,
>
> kbheec <kbh@...>
>
>
> -----Original Message-----
> From: Kathy Hambleton [mailto:kbh@...]
> Sent: Thursday, February 17, 2005 8:37 AM
> To: vantage@yahoogroups.com
> Subject: RE: Spam:[Vantage] Proforma Invoice
>
>
>
> Brian,
> I have a Report Builder report that generates a customs invoice for
> foreign
> shipments. I can send it to you if you like.
>
> Kathy Hambleton
> Electron Energy Corporation
> 717-898-2294
> 717-898-0660 (fax)
>
> -----Original Message-----
> From: Brian Larcom [mailto:bwlarcom@...]
> Sent: Wednesday, February 16, 2005 5:23 PM
> To: vantage@yahoogroups.com
> Subject: Spam:[Vantage] Proforma Invoice
>
> Does anyone have a report that creates an invoice at the time (or
> just after) a packing slip is cut so it can be sent with a foriegn
> shipment?
> tia
> Brian W. Larcom
> Metallized Carbon Corporation
> 914-941-3738
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 5
> Date: Fri, 10 Jun 2005 09:21:59 -0400
> From: "Shirley Graver" <shirleyg@...>
> Subject: RE: Poll results for vantage
>
> I think this is a clear mandate giving me political capital to spend.
> While
> it wasn't a Huge response 54% of those voting were in favor of letting
> Vista
> users in. While I don't think a formal invitation is in order.
>
> Any Vista 6 member that submits a request to join and gives an Epicor site
> ID I will approve their membership to the Vantage Group.
>
> As far as Vista Classic goes though, I'm mobilizing the troops and calling
> up the reserves for the invasion force.
>
> Shirley Graver
> Moderator
>
>
>
> _____
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of
> Lepley, Scott A.
> Sent: Friday, June 10, 2005 9:04 AM
> To: 'vantage@yahoogroups.com'
> Subject: RE: [Vantage] Poll results for vantage
>
> 35 votes / 1097 members = 3.2% voter turnout !!!
>
>
>
> It's clear that most of our members reside in the U.S., right? Gee,
> Shirley, maybe you should have done something to generate a little more
> interest, like broadcasting some vicious rhetoric about Vista users...
>
> Regards,
> Scott
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]
> Sent: Friday, June 10, 2005 4:02 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Poll results for vantage
>
>
> The following vantage poll is now closed. Here are the final results:
>
> POLL QUESTION: Should we invite the Vista group to merge with the Vantage
> group?
>
> CHOICES AND RESULTS
> - YES, 19 votes, 54.29%
> - NO, 16 votes, 45.71%
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> <http://groups.yahoo.com/group/vantage/files/>
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
>
>
> _____
>
> Yahoo! Groups Links
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/vantage/
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
>
> Tracking #: D5A9AB9387EB7E4F89B64904946BD6D5DCAFFC2E
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 6
> Date: Fri, 10 Jun 2005 08:40:47 -0500
> From: "Todd Caughey" <caugheyt@...>
> Subject: RE: Poll results for vantage
>
> There's nothing to say they can't be in both groups right? Like I'm in
> the CorVu group as well as the Vantage group.
>
> Quote: "While I don't think a formal invitation is in order"
>
> ....This is what I was thinking before not "voting"....like changing the
> poll phrasing to "allow" rather than "invite". Removing the Vista 6
> people from the Vista group would be as detrimental to the Vista Classic
> users as removing the Vantage 8 people from this group would be to the
> Vantage 6.x (and prior) members. We all need "up ladder" experience.
>
> I guess I'd favor "dual citizenship" for any Vista users interested enough
> in Vantage topics to want to join this group. Perhaps issue green cards
> or H1B visas. ;)
>
> -Todd C.
>
> -----Original Message-----
> From: Shirley Graver [mailto:shirleyg@...]
> Sent: Friday, June 10, 2005 8:22 AM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Poll results for vantage
>
>
> I think this is a clear mandate giving me political capital to spend.
> While
> it wasn't a Huge response 54% of those voting were in favor of letting
> Vista
> users in. While I don't think a formal invitation is in order.
>
> Any Vista 6 member that submits a request to join and gives an Epicor site
> ID I will approve their membership to the Vantage Group.
>
> As far as Vista Classic goes though, I'm mobilizing the troops and calling
> up the reserves for the invasion force.
>
> Shirley Graver
> Moderator
>
>
>
> _____
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of
> Lepley, Scott A.
> Sent: Friday, June 10, 2005 9:04 AM
> To: 'vantage@yahoogroups.com'
> Subject: RE: [Vantage] Poll results for vantage
>
> 35 votes / 1097 members = 3.2% voter turnout !!!
>
>
>
> It's clear that most of our members reside in the U.S., right? Gee,
> Shirley, maybe you should have done something to generate a little more
> interest, like broadcasting some vicious rhetoric about Vista users...
>
> Regards,
> Scott
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]
> Sent: Friday, June 10, 2005 4:02 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Poll results for vantage
>
>
> The following vantage poll is now closed. Here are the final results:
>
> POLL QUESTION: Should we invite the Vista group to merge with the Vantage
> group?
>
> CHOICES AND RESULTS
> - YES, 19 votes, 54.29%
> - NO, 16 votes, 45.71%
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> < http://groups.yahoo.com/group/vantage/files/>
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
>
>
> _____
>
> Yahoo! Groups Links
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/vantage/
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> < http://docs.yahoo.com/info/terms/> .
>
> Tracking #: D5A9AB9387EB7E4F89B64904946BD6D5DCAFFC2E
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
>
>
> _____
>
> Yahoo! Groups Links
>
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/vantage/
>
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 7
> Date: Fri, 10 Jun 2005 09:44:59 -0400
> From: "Frank Zeigafuse" <fzeigafuse@...>
> Subject: RE: OT: IT Storage
>
> Wow, I envy you.
>
> Sounds like a great system. Much better than an investigation every time
> you need a cd or a driver.
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@...
>
> Visit www.one.org to see how the world can be changed one person at a
> time.
>
>
>
> -----Original Message-----
> From: Lydia Coffman [mailto:lcoffman@...]
> Sent: Thursday, June 09, 2005 3:24 PM
> To: 'vantage@yahoogroups.com'
> Subject: RE: [Vantage] OT: IT Storage
>
>
> For what it is worth: All network software is kept (original packaging)
> in
> a locked file cabinet, filed alphabetically by the name of the software.
> Our
> hardware system consultant has a book at their site with all software info
> (purchase dates, keys, and so on), so if we had a devastating catastrophe,
> we could still get copies of our software from the manufacturer. Fire or
> earthquake are our two biggest possibilities (So California), system folks
> are far enough away that I can sleep at night.
>
> I have hanging files for each computer system, both the person's name and
> the computer name is on the folder, filed by person's last name. If the
> person leaves, it's easy to change the name and re-file. Filed by
> computer
> name seems logical, but then I have to have a list of what goes with whom.
> Any software, printer install cd's etc that are specific for that system
> are
> filed in that folder. No guessing about whether this is the right printer
> install for that computer. I used to keep all
> printer/monitor/mouse/keyboard etc... filed as Printer/monitor etc. It
> made
> me crazy. Also, all the license info is then filed with each system. We
> officially have no systems on our network that are not Dells, so the
> service
> tag info is with all the other info on the system (including a copy of the
> original packing slip listing amount of memory, type, etc). Dell has all
> of
> this info on their web-site, and you can go in and add user names and so
> on--but if the pie truck hits me on the way to work,
> NO ONE would think of looking on the Dell web site for info.
>
> Each server also has a folder and I keep info about
> service/changes/upgrades
> and so on in there.
>
> It would be great to be paperless, but with the idea that an audit could
> happen, I feel like it's better to have EVERYTHING. This is why computer
> people are such pack-rats -- as soon as you let some paper or CD out of
> your
> clutches, somebody shows up at the door and wants/needs it.
>
> Best thing for me is that NO ONE ELSE digs through the filing cabinets in
> my
> area.
>
> My 2 bits.
> Lydia
>
> -----Original Message-----
> From: Juliet Martin [mailto:jmartin@...]
> Sent: Thursday, June 09, 2005 11:45 AM
> To: VANTAGE@...
> Subject: [Vantage] OT: IT Storage
>
>
> We are looking at implementing an organization system for our Server Room
> and IT storage that (hopefully) will work this time. :-)
>
> What do you keep of your software purchases? Do you keep all the original
> packaging? How do you sort them? Do you sort by software name or by
> pc/department?
>
> Does anyone know of a good product to store CDs? Do you even keep CDs
> with
> the internet being such a wonderful source for new drivers and installs?
>
> Thanks in advance.
>
>
> Juliet Martin
> Information Manager
> Rosenboom Machine & Tool, Inc.
> Sheldon, IA 51201
> 712-324-4854 x1217
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 8
> Date: Fri, 10 Jun 2005 09:51:16 -0400
> From: "Frank Zeigafuse" <fzeigafuse@...>
> Subject: RE: Data Import / disabling and re-enabing triggers on a table
>
> Yes, this is true.
>
> And the epicor statement I love is support will be billable on an hourly
> basis :)
>
> This is why we use a script program.
>
> We create flat file and have the script program make the changes in
> vantage
> for us.
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@...
>
> Visit www.one.org to see how the world can be changed one person at a
> time.
>
>
>
> -----Original Message-----
> From: Gavin Davidson [mailto:gavinjd68@...]
> Sent: Thursday, June 09, 2005 1:36 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] Data Import / disabling and re-enabing triggers on
> a
> table
>
>
> Jeremy,
>
> That was my understanding too.
>
> Thanks
> --- jeremyrleonard@... wrote:
>
>
> ---------------------------------
> If you use the Progress ODBC Driver it does not fire
> any triggers. That
> being said, say a prayer before, after and during and
> hope you don't have any
> problems as Epicor will not support a database that
> has data imported into it via
> a method that bypasses their triggers.
>
> Jeremy
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: (
> Note: You must have already linked your email address
> to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for
> Report Builder and Crystal Reports and other
> 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage
> services goto:
> http://groups.yahoo.com/group/vantage/links
>
>
>
> ---------------------------------
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/vantage/
>
> To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service.
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 9
> Date: Fri, 10 Jun 2005 14:23:15 -0000
> From: "kwest_bmc" <kwest@...>
> Subject: Advanced Production Scheduling Module
>
> Is anyone actively using the APS Module with Vantage 6.1? What
> advantages do you think this has over just using the Visual Scheduling
> Board? Are you using Finite scheduling with this at all?
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 10
> Date: Fri, 10 Jun 2005 10:22:35 EDT
> From: jeremyrleonard@...
> Subject: Vantage Advanced Printing
>
> I have heard that there is an Advanced print module for Vantage.
>
> Anyone using it?
> What does it do?
> What kinda of cost?
> Is it worth it?
>
> Thanks
> Jeremy
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 11
> Date: Fri, 10 Jun 2005 16:59:33 -0000
> From: "sharma_nalini" <sharma_nalini@...>
> Subject: Production/Std. in operations
>
> Hi,
>
> Lately we changed all our inventory units to bx and selling unit to
> pieces.
>
> NOw it is very confusing :
>
> When we add operations to jobs teh our productions/std is pieces/hr and
> we enter the value accordingly.
>
> But what i found is, if my job is for 90 bx. and i entered 90 in my
> production/std which is piece/hr , i shows in my report that only 1 hr
> is required to complete the opeartion.
>
> which looks like that it is taking total production required in bx nit
> converting that to no. of pieces.
>
> Please help,if my suspision is correct, then we have to change huge
> amount of data.
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 12
> Date: Fri, 10 Jun 2005 12:06:21 -0500
> From: "Michael D. Howard" <mike@...>
> Subject: RE: Production/Std. in operations
>
> Your Inventory Unit of Measure is pc and your
> Selling Unit of Measure is bx with a factor of 90?
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
> Of sharma_nalini
> Sent: Friday, June 10, 2005 12:00 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Production/Std. in operations
>
>
> Hi,
>
> Lately we changed all our inventory units to bx and selling unit to
> pieces.
>
> NOw it is very confusing :
>
> When we add operations to jobs teh our productions/std is pieces/hr and
> we enter the value accordingly.
>
> But what i found is, if my job is for 90 bx. and i entered 90 in my
> production/std which is piece/hr , i shows in my report that only 1 hr
> is required to complete the opeartion.
>
> which looks like that it is taking total production required in bx nit
> converting that to no. of pieces.
>
> Please help,if my suspision is correct, then we have to change huge
> amount of data.
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 13
> Date: Fri, 10 Jun 2005 17:09:19 -0000
> From: "sharma_nalini" <sharma_nalini@...>
> Subject: Re: Production/Std. in operations
>
> NO, It;s the other way.
>
> Our inventory unit of measure is box and selling unit is pc.
>
> In vantage@yahoogroups.com, "Michael D. Howard" <mike@g...> wrote:
>> Your Inventory Unit of Measure is pc and your
>> Selling Unit of Measure is bx with a factor of 90?
>>
>> -----Original Message-----
>> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
> Behalf
>> Of sharma_nalini
>> Sent: Friday, June 10, 2005 12:00 PM
>> To: vantage@yahoogroups.com
>> Subject: [Vantage] Production/Std. in operations
>>
>>
>> Hi,
>>
>> Lately we changed all our inventory units to bx and selling unit to
>> pieces.
>>
>> NOw it is very confusing :
>>
>> When we add operations to jobs teh our productions/std is pieces/hr
> and
>> we enter the value accordingly.
>>
>> But what i found is, if my job is for 90 bx. and i entered 90 in my
>> production/std which is piece/hr , i shows in my report that only 1
> hr
>> is required to complete the opeartion.
>>
>> which looks like that it is taking total production required in bx
> nit
>> converting that to no. of pieces.
>>
>> Please help,if my suspision is correct, then we have to change huge
>> amount of data.
>>
>>
>>
>>
>>
>>
>> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> must have
>> already linked your email address to a yahoo id to enable access. )
>> (1) To access the Files Section of our Yahoo!Group for Report
> Builder and
>> Crystal Reports and other 'goodies', please goto:
>> http://groups.yahoo.com/group/vantage/files/.
>> (2) To search through old msg's goto:
>> http://groups.yahoo.com/group/vantage/messages
>> (3) To view links to Vendors that provide Vantage services goto:
>> http://groups.yahoo.com/group/vantage/links
>> Yahoo! Groups Links
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 14
> Date: Fri, 10 Jun 2005 10:13:31 -0700
> From: Lydia Coffman <lcoffman@...>
> Subject: RE: Re: Production/Std. in operations
>
> Are there 90 pcs in a box?
>
> -----Original Message-----
> From: sharma_nalini [mailto:sharma_nalini@...]
> Sent: Friday, June 10, 2005 10:09 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: Production/Std. in operations
>
>
> NO, It;s the other way.
>
> Our inventory unit of measure is box and selling unit is pc.
>
> In vantage@yahoogroups.com, "Michael D. Howard" <mike@g...> wrote:
>> Your Inventory Unit of Measure is pc and your
>> Selling Unit of Measure is bx with a factor of 90?
>>
>> -----Original Message-----
>> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
> Behalf
>> Of sharma_nalini
>> Sent: Friday, June 10, 2005 12:00 PM
>> To: vantage@yahoogroups.com
>> Subject: [Vantage] Production/Std. in operations
>>
>>
>> Hi,
>>
>> Lately we changed all our inventory units to bx and selling unit to
>> pieces.
>>
>> NOw it is very confusing :
>>
>> When we add operations to jobs teh our productions/std is pieces/hr
> and
>> we enter the value accordingly.
>>
>> But what i found is, if my job is for 90 bx. and i entered 90 in my
>> production/std which is piece/hr , i shows in my report that only 1
> hr
>> is required to complete the opeartion.
>>
>> which looks like that it is taking total production required in bx
> nit
>> converting that to no. of pieces.
>>
>> Please help,if my suspision is correct, then we have to change huge
>> amount of data.
>>
>>
>>
>>
>>
>>
>> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> must have
>> already linked your email address to a yahoo id to enable access. )
>> (1) To access the Files Section of our Yahoo!Group for Report
> Builder and
>> Crystal Reports and other 'goodies', please goto:
>> http://groups.yahoo.com/group/vantage/files/.
>> (2) To search through old msg's goto:
>> http://groups.yahoo.com/group/vantage/messages
>> (3) To view links to Vendors that provide Vantage services goto:
>> http://groups.yahoo.com/group/vantage/links
>> Yahoo! Groups Links
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 15
> Date: Fri, 10 Jun 2005 17:21:03 -0000
> From: "sharma_nalini" <sharma_nalini@...>
> Subject: Re: Production/Std. in operations
>
> Yes,
>
>
> ]
> --- In vantage@yahoogroups.com, Lydia Coffman <lcoffman@c...> wrote:
>> Are there 90 pcs in a box?
>>
>> -----Original Message-----
>> From: sharma_nalini [mailto:sharma_nalini@y...]
>> Sent: Friday, June 10, 2005 10:09 AM
>> To: vantage@yahoogroups.com
>> Subject: [Vantage] Re: Production/Std. in operations
>>
>>
>> NO, It;s the other way.
>>
>> Our inventory unit of measure is box and selling unit is pc.
>>
>> In vantage@yahoogroups.com, "Michael D. Howard" <mike@g...> wrote:
>> > Your Inventory Unit of Measure is pc and your
>> > Selling Unit of Measure is bx with a factor of 90?
>> >
>> > -----Original Message-----
>> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
>> Behalf
>> > Of sharma_nalini
>> > Sent: Friday, June 10, 2005 12:00 PM
>> > To: vantage@yahoogroups.com
>> > Subject: [Vantage] Production/Std. in operations
>> >
>> >
>> > Hi,
>> >
>> > Lately we changed all our inventory units to bx and selling unit
> to
>> > pieces.
>> >
>> > NOw it is very confusing :
>> >
>> > When we add operations to jobs teh our productions/std is
> pieces/hr
>> and
>> > we enter the value accordingly.
>> >
>> > But what i found is, if my job is for 90 bx. and i entered 90 in
> my
>> > production/std which is piece/hr , i shows in my report that only
> 1
>> hr
>> > is required to complete the opeartion.
>> >
>> > which looks like that it is taking total production required in
> bx
>> nit
>> > converting that to no. of pieces.
>> >
>> > Please help,if my suspision is correct, then we have to change
> huge
>> > amount of data.
>> >
>> >
>> >
>> >
>> >
>> >
>> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
>> must have
>> > already linked your email address to a yahoo id to enable
> access. )
>> > (1) To access the Files Section of our Yahoo!Group for Report
>> Builder and
>> > Crystal Reports and other 'goodies', please goto:
>> > http://groups.yahoo.com/group/vantage/files/.
>> > (2) To search through old msg's goto:
>> > http://groups.yahoo.com/group/vantage/messages
>> > (3) To view links to Vendors that provide Vantage services goto:
>> > http://groups.yahoo.com/group/vantage/links
>> > Yahoo! Groups Links
>>
>>
>>
>>
>> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> must have
>> already linked your email address to a yahoo id to enable access. )
>> (1) To access the Files Section of our Yahoo!Group for Report
> Builder and
>> Crystal Reports and other 'goodies', please goto:
>> http://groups.yahoo.com/group/vantage/files/.
>> (2) To search through old msg's goto:
>> http://groups.yahoo.com/group/vantage/messages
>> (3) To view links to Vendors that provide Vantage services goto:
>> http://groups.yahoo.com/group/vantage/links
>> Yahoo! Groups Links
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 16
> Date: Fri, 10 Jun 2005 12:59:08 CDT
> From: Amy OMalley <omall004@...>
> Subject: Re: Production/Std. in operations
>
> Then your quantity per parent on each operation will all need to be
> changed
> to 90 (you need to build 90 parts to produce one parent part, in your case
> one box) and your material qty per parent will need to be multiplied by
> 90.
>
> Amy O'Malley
> V8.00.710
> Manufacturing Engineer
> Synovis Interventional Solutions
> Lino Lakes, Minnesota USA
>
> On 10 Jun 2005, sharma_nalini wrote:
>> Hi,
>>
>> Lately we changed all our inventory units to bx and selling unit to
>> pieces.
>>
>> NOw it is very confusing :
>>
>> When we add operations to jobs teh our productions/std is pieces/hr and
>> we enter the value accordingly.
>>
>> But what i found is, if my job is for 90 bx. and i entered 90 in my
>> production/std which is piece/hr , i shows in my report that only 1 hr
>> is required to complete the opeartion.
>>
>> which looks like that it is taking total production required in bx nit
>> converting that to no. of pieces.
>>
>> Please help,if my suspision is correct, then we have to change huge
>> amount of data.
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 17
> Date: Fri, 10 Jun 2005 11:03:51 -0700
> From: Lydia Coffman <lcoffman@...>
> Subject: RE: Re: Production/Std. in operations
>
> Then your standard should be boxes per hour or minute or whatever...or use
> a
> fixed amount of time--just remember that Vantage is still going to show
> you
> "pieces" -- the descriptions in standards are fixed -- you have several
> choices in the radio box. A box in your situation would be a "piece" in
> Vantage standards. Then when you ship, you'll have to translate them
> back.
>
> I'm afraid you've set your operators and assembly and shipping people up
> to
> be confused. Are these completed so fast that the quantities are too high
> to
> report?
>
> Lydia
>
> -----Original Message-----
> From: sharma_nalini [mailto:sharma_nalini@...]
> Sent: Friday, June 10, 2005 10:21 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: Production/Std. in operations
>
>
> Yes,
>
>
> ]
> --- In vantage@yahoogroups.com, Lydia Coffman <lcoffman@c...> wrote:
>> Are there 90 pcs in a box?
>>
>> -----Original Message-----
>> From: sharma_nalini [mailto:sharma_nalini@y...]
>> Sent: Friday, June 10, 2005 10:09 AM
>> To: vantage@yahoogroups.com
>> Subject: [Vantage] Re: Production/Std. in operations
>>
>>
>> NO, It;s the other way.
>>
>> Our inventory unit of measure is box and selling unit is pc.
>>
>> In vantage@yahoogroups.com, "Michael D. Howard" <mike@g...> wrote:
>> > Your Inventory Unit of Measure is pc and your
>> > Selling Unit of Measure is bx with a factor of 90?
>> >
>> > -----Original Message-----
>> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On
>> Behalf
>> > Of sharma_nalini
>> > Sent: Friday, June 10, 2005 12:00 PM
>> > To: vantage@yahoogroups.com
>> > Subject: [Vantage] Production/Std. in operations
>> >
>> >
>> > Hi,
>> >
>> > Lately we changed all our inventory units to bx and selling unit
> to
>> > pieces.
>> >
>> > NOw it is very confusing :
>> >
>> > When we add operations to jobs teh our productions/std is
> pieces/hr
>> and
>> > we enter the value accordingly.
>> >
>> > But what i found is, if my job is for 90 bx. and i entered 90 in
> my
>> > production/std which is piece/hr , i shows in my report that only
> 1
>> hr
>> > is required to complete the opeartion.
>> >
>> > which looks like that it is taking total production required in
> bx
>> nit
>> > converting that to no. of pieces.
>> >
>> > Please help,if my suspision is correct, then we have to change
> huge
>> > amount of data.
>> >
>> >
>> >
>> >
>> >
>> >
>> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
>> must have
>> > already linked your email address to a yahoo id to enable
> access. )
>> > (1) To access the Files Section of our Yahoo!Group for Report
>> Builder and
>> > Crystal Reports and other 'goodies', please goto:
>> > http://groups.yahoo.com/group/vantage/files/.
>> > (2) To search through old msg's goto:
>> > http://groups.yahoo.com/group/vantage/messages
>> > (3) To view links to Vendors that provide Vantage services goto:
>> > http://groups.yahoo.com/group/vantage/links
>> > Yahoo! Groups Links
>>
>>
>>
>>
>> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> must have
>> already linked your email address to a yahoo id to enable access. )
>> (1) To access the Files Section of our Yahoo!Group for Report
> Builder and
>> Crystal Reports and other 'goodies', please goto:
>> http://groups.yahoo.com/group/vantage/files/.
>> (2) To search through old msg's goto:
>> http://groups.yahoo.com/group/vantage/messages
>> (3) To view links to Vendors that provide Vantage services goto:
>> http://groups.yahoo.com/group/vantage/links
>> Yahoo! Groups Links
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 18
> Date: Fri, 10 Jun 2005 14:13:21 -0400
> From: "PLAMAN DICK" <dick.plaman@...>
> Subject: Estimating with Vantage 6.1
>
> I know some of you are using Micro Estimating with Vantage and have the
> interface. Are there any other
> packages that interface with vantage?
>
> thanks,
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 19
> Date: Fri, 10 Jun 2005 14:16:31 -0400
> From: "Frank Zeigafuse" <fzeigafuse@...>
> Subject: RE: Estimating with Vantage 6.1
>
> Dumb question time for Friday.
>
> Why not use Vantage, I actually think it works pretty well.
>
> What process / industry are you estimating for?
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@...
>
> Visit www.one.org to see how the world can be changed one person at a
> time.
>
>
>
> -----Original Message-----
> From: PLAMAN DICK [mailto:dick.plaman@...]
> Sent: Friday, June 10, 2005 2:13 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Estimating with Vantage 6.1
>
>
> I know some of you are using Micro Estimating with Vantage and have the
> interface. Are there any other packages that interface with vantage?
>
> thanks,
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 20
> Date: Fri, 10 Jun 2005 14:19:37 -0400
> From: "PLAMAN DICK" <dick.plaman@...>
> Subject: RE: Estimating with Vantage 6.1
>
> Some of the CAD folks want machinery feeds and speeds .
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Frank Zeigafuse
> Sent: Friday, June 10, 2005 2:17 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Estimating with Vantage 6.1
>
> Dumb question time for Friday.
>
> Why not use Vantage, I actually think it works pretty well.
>
> What process / industry are you estimating for?
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@...
>
> Visit www.one.org to see how the world can be changed one person at a
> time.
>
>
>
> -----Original Message-----
> From: PLAMAN DICK [mailto:dick.plaman@...]
> Sent: Friday, June 10, 2005 2:13 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Estimating with Vantage 6.1
>
>
> I know some of you are using Micro Estimating with Vantage and have the
> interface. Are there any other packages that interface with vantage?
>
> thanks,
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 21
> Date: Fri, 10 Jun 2005 14:24:50 -0400
> From: "Frank Zeigafuse" <fzeigafuse@...>
> Subject: RE: Estimating with Vantage 6.1
>
> Have you tried operation standards?
> You might be able to make everyone happy get you run time / setup
> information for costing and scheduling and you can have comments. Might
> work.
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@...
>
> Visit www.one.org to see how the world can be changed one person at a
> time.
>
>
>
> -----Original Message-----
> From: PLAMAN DICK [mailto:dick.plaman@...]
> Sent: Friday, June 10, 2005 2:20 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Estimating with Vantage 6.1
>
>
> Some of the CAD folks want machinery feeds and speeds .
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of
> Frank Zeigafuse
> Sent: Friday, June 10, 2005 2:17 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Estimating with Vantage 6.1
>
> Dumb question time for Friday.
>
> Why not use Vantage, I actually think it works pretty well.
>
> What process / industry are you estimating for?
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@...
>
> Visit www.one.org to see how the world can be changed one person at a
> time.
>
>
>
> -----Original Message-----
> From: PLAMAN DICK [mailto:dick.plaman@...]
> Sent: Friday, June 10, 2005 2:13 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Estimating with Vantage 6.1
>
>
> I know some of you are using Micro Estimating with Vantage and have the
> interface. Are there any other packages that interface with vantage?
>
> thanks,
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 22
> Date: Fri, 10 Jun 2005 18:24:55 -0000
> From: "progress92000" <nvong@...>
> Subject: Re: Estimating with Vantage 6.1
>
> Since I am looking for the same information....
>
> We also want the software has ability to do quick nesting and display
> as well.
>
>
> --- In vantage@yahoogroups.com, "PLAMAN DICK" <dick.plaman@T...>
> wrote:
>> Some of the CAD folks want machinery feeds and speeds .
>>
>> -----Original Message-----
>> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> Behalf
>> Of Frank Zeigafuse
>> Sent: Friday, June 10, 2005 2:17 PM
>> To: vantage@yahoogroups.com
>> Subject: RE: [Vantage] Estimating with Vantage 6.1
>>
>> Dumb question time for Friday.
>>
>> Why not use Vantage, I actually think it works pretty well.
>>
>> What process / industry are you estimating for?
>>
>> Frank Zeigafuse
>> Innovative Office Products
>> General Manager
>> Direct Phone: 610-559-6369
>> Email: fzeigafuse@L...
>>
>> Visit www.one.org to see how the world can be changed one person at
> a
>> time.
>>
>>
>>
>> -----Original Message-----
>> From: PLAMAN DICK [mailto:dick.plaman@T...]
>> Sent: Friday, June 10, 2005 2:13 PM
>> To: vantage@yahoogroups.com
>> Subject: [Vantage] Estimating with Vantage 6.1
>>
>>
>> I know some of you are using Micro Estimating with Vantage and have
> the
>> interface. Are there any other packages that interface with
> vantage?
>>
>> thanks,
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> must
>> have
>> already linked your email address to a yahoo id to enable access. )
>> (1) To access the Files Section of our Yahoo!Group for Report
> Builder
>> and
>> Crystal Reports and other 'goodies', please goto:
>> http://groups.yahoo.com/group/vantage/files/.
>> (2) To search through old msg's goto:
>> http://groups.yahoo.com/group/vantage/messages
>> (3) To view links to Vendors that provide Vantage services goto:
>> http://groups.yahoo.com/group/vantage/links
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> must
>> have already linked your email address to a yahoo id to enable
> access. )
>> (1) To access the Files Section of our Yahoo!Group for Report
> Builder
>> and Crystal Reports and other 'goodies', please goto:
>> http://groups.yahoo.com/group/vantage/files/.
>> (2) To search through old msg's goto:
>> http://groups.yahoo.com/group/vantage/messages
>> (3) To view links to Vendors that provide Vantage services goto:
>> http://groups.yahoo.com/group/vantage/links
>> Yahoo! Groups Links
>
>
>
>
> ________________________________________________________________________
> ________________________________________________________________________
>
> Message: 23
> Date: Fri, 10 Jun 2005 14:31:44 -0400
> From: "PLAMAN DICK" <dick.plaman@...>
> Subject: RE: Estimating with Vantage 6.1
>
> Because the estimates are variable, I don't think operation standards
> would work for us.
> Thx,
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Frank Zeigafuse
> Sent: Friday, June 10, 2005 2:25 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Estimating with Vantage 6.1
>
> Have you tried operation standards?
> You might be able to make everyone happy get you run time / setup
> information for costing and scheduling and you can have comments. Might
> work.
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@...
>
> Visit www.one.org to see how the world can be changed one person at a
> time.
>
>
>
> -----Original Message-----
> From: PLAMAN DICK [mailto:dick.plaman@...]
> Sent: Friday, June 10, 2005 2:20 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Estimating with Vantage 6.1
>
>
> Some of the CAD folks want machinery feeds and speeds .
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of
> Frank Zeigafuse
> Sent: Friday, June 10, 2005 2:17 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Estimating with Vantage 6.1
>
> Dumb question time for Friday.
>
> Why not use Vantage, I actually think it works pretty well.
>
> What process / industry are you estimating for?
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@...
>
> Visit www.one.org to see how the world can be changed one person at a
> time.
>
>
>
> -----Original Message-----
> From: PLAMAN DICK [mailto:dick.plaman@...]
> Sent: Friday, June 10, 2005 2:13 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Estimating with Vantage 6.1
>
>
> I know some of you are using Micro Estimating with Vantage and have the
> interface. Are there any other packages that interface with vantage?
>
> thanks,
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder