** Bug in 311 Patch! **

Yahoo Archive
1
Hmmm. You're tapping my memory now, Rick. Ah, I think there were a dozen or
so Crystal and/or RB reports that had the newer PartPlant tables, as well as
the OurShippedQty and SellShippedQty (instead of ShippedQty). (Is 5.1 when
those fields changed??). We had about 200 reports in total, but very few
were affected by the changes. Of course our customized Vantage reports (ie.
poform.rpt) had the most work to do... not so much because of field changes,
but because I decided to start from scratch on those because of the amount
of customizing that we have done.

Troy Funte
Liberty Electronics

-----Original Message-----
From: Rick Gors [mailto:rgors@...]
Sent: Friday, February 14, 2003 7:31 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] ** Bug in 311 Patch!! **



Troy:

When you went from 5.0 to 5.1, how many forms and reports did you have
to
change?

Just curious, since I'm poised to make that jump...


TIA

RG


[Non-text portions of this message have been removed]


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]
2
Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes
up with a error
Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is
no work around.

My General manager hits the roof and says were are not applying ANY
patches any more until we know they are 100% safe
Even if it takes 2 months to work thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]
3
James,

I admire your strength! I have one question for the group - are we crazy to
keep hoping that 6.0 or Sonoma is going to be the answer to our prayers? I
used to work for Great Plains and understand bugs, workarounds, etc. but
breaking old modules is really a problem. I do really like Vantage and
software like this never works right out of the box but Epicor, help us to
continue praising your product and paying our yearly maintenance fee by
maintaining the features and functionality you already provide.

Just my 2 cents again.

Lori A. Baker
WindStone Medical Inc.

-----Original Message-----
From: James Piper [mailto:admin@...]
Sent: Thursday, February 13, 2003 2:39 PM
To: vantage@yahoogroups.com
Subject: [Vantage] ** Bug in 311 Patch!! **


Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes up
with a error Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is no
work around.

My General manager hits the roof and says were are not applying ANY patches
any more until we know they are 100% safe Even if it takes 2 months to work
thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~--> Get
128 Bit SSL Encryption!
http://us.click.yahoo.com/FpY02D/vN2EAA/xGHJAA/PhFolB/TM
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
4
Wherever, whenever, the next Perspectives conference occurs.......it's going to be mighty interesting if the buggy patches and ongoing MAJOR problems (like EWB/BOM) are not resolved long enough before to be just a bad memory.
-Todd C.

-----Original Message-----
From: Lori Baker [mailto:lbaker@...]
Sent: Thursday, February 13, 2003 3:44 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] ** Bug in 311 Patch!! **


James,

I admire your strength! I have one question for the group - are we crazy to
keep hoping that 6.0 or Sonoma is going to be the answer to our prayers? I
used to work for Great Plains and understand bugs, workarounds, etc. but
breaking old modules is really a problem. I do really like Vantage and
software like this never works right out of the box but Epicor, help us to
continue praising your product and paying our yearly maintenance fee by
maintaining the features and functionality you already provide.

Just my 2 cents again.

Lori A. Baker
WindStone Medical Inc.

-----Original Message-----
From: James Piper [mailto:admin@...]
Sent: Thursday, February 13, 2003 2:39 PM
To: vantage@yahoogroups.com
Subject: [Vantage] ** Bug in 311 Patch!! **


Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes up
with a error Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is no
work around.

My General manager hits the roof and says were are not applying ANY patches
any more until we know they are 100% safe Even if it takes 2 months to work
thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~--> Get
128 Bit SSL Encryption!
http://us.click.yahoo.com/FpY02D/vN2EAA/xGHJAA/PhFolB/TM
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
5
As Nelson says on Simpsons... "Ha ha!"



-----Original Message-----
From: James Piper [mailto:admin@...]
Sent: Thursday, February 13, 2003 3:39 PM
To: vantage@yahoogroups.com
Subject: [Vantage] ** Bug in 311 Patch!! **

Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes
up with a error
Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is
no work around.

My General manager hits the roof and says were are not applying ANY
patches any more until we know they are 100% safe
Even if it takes 2 months to work thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.


[Non-text portions of this message have been removed]
6
Speaking of bugs... we came across a bug in receiving (we're on patch 308) -
if you use 'mass receipts' on items that are not in your part master, you
get an error, "No PartPlant Record Available (91)"

Yes, it's a "known" bug... and the 'workaround' is to click through the
error or don't use mass receipts...



[Non-text portions of this message have been removed]
7
James,

I just applied the patch to our standalone test DB (after backing up, of
course). When I run an indented BOM, it works fine.

Is there an epicor document for the bug yet? I'd be interested in seeing
it.

Thaddeus

-----Original Message-----
From: James Piper [mailto:admin@...]
Sent: Thursday, February 13, 2003 1:39 PM
To: vantage@yahoogroups.com
Subject: [Vantage] ** Bug in 311 Patch!! **


Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes
up with a error
Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is
no work around.

My General manager hits the roof and says were are not applying ANY
patches any more until we know they are 100% safe
Even if it takes 2 months to work thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
8
Thing haven't and won't change. I recall being the one of the first to
install Version 4 and my workshop staff couldn't use the work queue in data
collection. The "Work around" was to enter by using the Job Number, You try
to get 100 people on a workshop floor to do something different when trained
to use the work queue. It took Epicor 6 weeks to fix the problem and even
used that stall tactic of burning the Data Base and sending to the US from
Australia.

Now I upgrade to the Version 5.2 about 1 month before Version 6 is released
then you have a fair chance 5.2 is OK!.

-----Original Message-----
From: James Piper [mailto:admin@...]
Sent: Friday, February 14, 2003 7:39 AM
To: vantage@yahoogroups.com
Subject: [Vantage] ** Bug in 311 Patch!! **


Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes
up with a error
Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is
no work around.

My General manager hits the roof and says were are not applying ANY
patches any more until we know they are 100% safe
Even if it takes 2 months to work thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
9
A few months ago I was trying to encourage management to consider the
benefits of Vantage 5.2. But had we done it I would have been strung up
alive by now, based on the feedback I have received from the group. We're
glad to be sitting it out at 5.1.

Troy Funte
Liberty Electronics

-----Original Message-----
From: Mark Howard [mailto:mhoward@...]
Sent: Thursday, February 13, 2003 5:39 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] ** Bug in 311 Patch!! **


Thing haven't and won't change. I recall being the one of the first to
install Version 4 and my workshop staff couldn't use the work queue in
data
collection. The "Work around" was to enter by using the Job Number, You
try
to get 100 people on a workshop floor to do something different when
trained
to use the work queue. It took Epicor 6 weeks to fix the problem and even
used that stall tactic of burning the Data Base and sending to the US from
Australia.

Now I upgrade to the Version 5.2 about 1 month before Version 6 is
released
then you have a fair chance 5.2 is OK!.

-----Original Message-----
From: James Piper [mailto:admin@...]
Sent: Friday, February 14, 2003 7:39 AM
To: vantage@yahoogroups.com
Subject: [Vantage] ** Bug in 311 Patch!! **


Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes
up with a error
Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is
no work around.

My General manager hits the roof and says were are not applying ANY
patches any more until we know they are 100% safe
Even if it takes 2 months to work thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]
10
Troy:

When you went from 5.0 to 5.1, how many forms and reports did you have to
change?

Just curious, since I'm poised to make that jump...


TIA

RG


[Non-text portions of this message have been removed]
11
What is the last patch level to upgrade to which is stable?
I'm in the process of going to 5.2 from 5.1

Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.10.130, Progress 9.1C



-----Original Message-----
From: James Piper [mailto:admin@...]
Sent: Thursday, February 13, 2003 3:39 PM
To: vantage@yahoogroups.com
Subject: [Vantage] ** Bug in 311 Patch!! **


Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes up
with a error Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is no
work around.

My General manager hits the roof and says were are not applying ANY patches
any more until we know they are 100% safe Even if it takes 2 months to work
thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~--> Get
128 Bit SSL Encryption!
http://us.click.yahoo.com/FpY02D/vN2EAA/xGHJAA/PhFolB/TM
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
12
Gee Pat ... Sounds like you should give the 311 patch a shot ... stable is a
relative term you know ... :-)

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Friday, February 14, 2003 7:38 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] ** Bug in 311 Patch!! **


What is the last patch level to upgrade to which is stable?
I'm in the process of going to 5.2 from 5.1

Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.10.130, Progress 9.1C



-----Original Message-----
From: James Piper [mailto:admin@...]
Sent: Thursday, February 13, 2003 3:39 PM
To: vantage@yahoogroups.com
Subject: [Vantage] ** Bug in 311 Patch!! **


Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes up
with a error Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is no
work around.

My General manager hits the roof and says were are not applying ANY patches
any more until we know they are 100% safe Even if it takes 2 months to work
thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~--> Get
128 Bit SSL Encryption!
http://us.click.yahoo.com/FpY02D/vN2EAA/xGHJAA/PhFolB/TM
<http://us.click.yahoo.com/FpY02D/vN2EAA/xGHJAA/PhFolB/TM>
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
13
I'm running .311 in a test environment now. I ran an indented BOM for ALL
assemblies (totalling over 1000 pages), and recieved absolutely no errors.
I ran an indented bom for 10 separate assemblies that I manually typed in,
and recieved no errors.

I ran mass reciepts for all the lines on a CDW PO for which none of the
parts are in our part master. I did recieve the PartPlant not available
error, but all the lines were still recieved properly, as far as I can tell.

Given the workbench issues resolved, I would say that .311 IS the most
stable 5.2 patch yet. We are still planning to update from 3.0 to 5.2.

Thaddeus Jacobs
IT Developer
Kinematic Automation, Inc.
mailto:tjacobs@...




-----Original Message-----
From: Todd Anderson [mailto:tanderson@...]
Sent: Friday, February 14, 2003 6:30 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] ** Bug in 311 Patch!! **


Gee Pat ... Sounds like you should give the 311 patch a shot ... stable is a
relative term you know ... :-)

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Friday, February 14, 2003 7:38 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] ** Bug in 311 Patch!! **


What is the last patch level to upgrade to which is stable?
I'm in the process of going to 5.2 from 5.1

Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.10.130, Progress 9.1C



-----Original Message-----
From: James Piper [mailto:admin@...]
Sent: Thursday, February 13, 2003 3:39 PM
To: vantage@yahoogroups.com
Subject: [Vantage] ** Bug in 311 Patch!! **


Well I went and done it
Applied the 311 patch yesterday

NOW
When you run a bom listing report and ask for a indented bom, it comes up
with a error Entry 3 is outside the range of list xxxxxxx(part number) (560)
Called Epicor and they say its a known bug in the 311 patch and there is no
work around.

My General manager hits the roof and says were are not applying ANY patches
any more until we know they are 100% safe Even if it takes 2 months to work
thru the bugs!

When will we get a BUG FREE Patch

Ahhh!!!!!!!!!!


James Piper - Systems Administrator
MECO, Inc
Paris, IL 61944
Email: <mailto:admin@...> admin@...






[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~--> Get
128 Bit SSL Encryption!
http://us.click.yahoo.com/FpY02D/vN2EAA/xGHJAA/PhFolB/TM
<http://us.click.yahoo.com/FpY02D/vN2EAA/xGHJAA/PhFolB/TM>
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
14
Well after I posted the bug report someone from Epicor contacts me
and says there is no bugs in 311 and its a problem with our database
Then the gal I was working emails me and says that want me to upload
our database to them to try and see what the problem is.
Management is not comforatable with that so we are trying to see if
we can find the problem internally before we upload our database

So I guess I was TOLD WRONG
I was specifically told by the Epicor rep that there was a documented
bug in 311 then someone higher up comes back and says
No bugs in 311
Its your database

I am just tired of trying to fight the good fight for this week I
guess

Thanks
15
Then the gal I was working emails me and says that want me to upload
our database to them to try and see what the problem is.
Management is not comforatable with that so we are trying to see if
[Rick Gors] In the past I have sent them my database and they found
problems, solved them and deleted the database. No problem/concerns in my
book. I suggest you give it a try...it's easier then beating your head
against the wall.

Good luck

RG


[Non-text portions of this message have been removed]