6430 did not work RE: Epicor 9 Conversion Program 64

Yahoo Archive
1
Good Day:

I ran the 6430 conversion, and it only fixed 1,000 of 3,000 errors.
I ran it in conversion mode again. then ran the report and still
2,000 errors.

I also noted that before the update, many had an "Unfirm Reserv"
error and NONE had a "Buy to order" error.
After the update, there were many had an "Buy to order" error
and NONE had a "Unfirm Reserv" error.
Also, many of the Part#'s are different even though the number of
pages was 172 versus 173.

Is that what you get?

Since it seems to create more errors, I do not think I want to run
it.



Len


________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Mark
Sent: Thursday, March 10, 2011 2:44 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Epicor 9 Conversion Program 6430






Hi we are on 8.03.405a and have to run it regularly, more so lately for
some reason, for us the demand figure is incorrect and running this
corrects it. I don't really get how this can be normal, we run a
regenerative MRP every day so how it can't recalculate the demand
correctly is strange.

Mark

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , Gene
Mcdonald <gmcdonald333@...> wrote:
>
> Does anyone regularly run the Conversion Program 6430? We are having
On Hand
> inventory variances atn a disturbingly high rate. Currently Epcior has
us
> running this program twice a day. They state that they are aware of a
problem
> and that they have not been able to isolate the root cause yet.
>
> Does anyone have any comments or thoughts?
>
> Thanks,
> Gene M.
>
>
>
>
> [Non-text portions of this message have been removed]
>






This e-mail and any attachments may contain proprietary and/or confidential information. If you are not the intended recipient, please notify the sender immediately by reply e-mail or at 410-472-2900 and then delete the message without using, disseminating, or copying this message or any portion thereof. With e-mail communications you are urged to protect against viruses.


[Non-text portions of this message have been removed]
2
Does anyone regularly run the Conversion Program 6430? We are having On Hand
inventory variances atn a disturbingly high rate. Currently Epcior has us
running this program twice a day. They state that they are aware of a problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.




[Non-text portions of this message have been removed]
3
I run 6430 and 6527 at least once a day.




________________________________
From: Gene Mcdonald <gmcdonald333@...>
To: vantage@yahoogroups.com
Sent: Wed, March 9, 2011 7:42:31 AM
Subject: [Vantage] Epicor 9 Conversion Program 6430

Â
Does anyone regularly run the Conversion Program 6430? We are having On Hand
inventory variances atn a disturbingly high rate. Currently Epcior has us
running this program twice a day. They state that they are aware of a problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]
4
Yes, I run it every Monday. It catches a part every few weeks or so. Epicor
support told me the cause was not known. I've been monitoring the corrected
parts and trying to identify a pattern. I haven't noticed anything yet.



Gerry





From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Gene Mcdonald
Sent: Wednesday, March 09, 2011 7:43 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Epicor 9 Conversion Program 6430





Does anyone regularly run the Conversion Program 6430? We are having On Hand

inventory variances atn a disturbingly high rate. Currently Epcior has us
running this program twice a day. They state that they are aware of a
problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
5
Hi Steve,
Â
Martin asked the following:
Â
"Please could you ask Steve about prices for the all the sizes of disconnects we
currently buy."
Â
Thanks,
Â

CHRIS THOMPSON




________________________________
From: Steven Gotschall <sgotschall@...>
To: vantage@yahoogroups.com
Sent: Wed, 9 March, 2011 13:25:09
Subject: Re: [Vantage] Epicor 9 Conversion Program 6430

Â
I run 6430 and 6527 at least once a day.

________________________________
From: Gene Mcdonald <gmcdonald333@...>
To: vantage@yahoogroups.com
Sent: Wed, March 9, 2011 7:42:31 AM
Subject: [Vantage] Epicor 9 Conversion Program 6430

Â
Does anyone regularly run the Conversion Program 6430? We are having On Hand
inventory variances atn a disturbingly high rate. Currently Epcior has us
running this program twice a day. They state that they are aware of a problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]
6
We are having the same issue and run it every Saturday night to make sure our On Hand quantities are correct. Support gave us the exact answer that they gave you. We have escalated the issue to see if we can find the root cause of the issue, but so far we have not had any luck.

Thanks,

Lauren

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Gene Mcdonald
Sent: Wednesday, March 09, 2011 6:43 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Epicor 9 Conversion Program 6430



Does anyone regularly run the Conversion Program 6430? We are having On Hand
inventory variances atn a disturbingly high rate. Currently Epcior has us
running this program twice a day. They state that they are aware of a problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.

[Non-text portions of this message have been removed]



----------Legal Disclaimer----------

The information contained in this message may be privileged and confidential, and is intended solely for the use of the named addressee. No other person is authorized to access, copy or re-use this message (or any information contained herein). If you are not the intended recipient, please notify us immediately by replying to this message and delete it from your computer.



[Non-text portions of this message have been removed]
7
Good Day:

1. What version are you running.
2. How do you know ( or find) that you have the QOH varience?


len.hartka@...

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Hellings, Lauren
Sent: Wednesday, March 09, 2011 3:52 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430




We are having the same issue and run it every Saturday night to make
sure our On Hand quantities are correct. Support gave us the exact
answer that they gave you. We have escalated the issue to see if we can
find the root cause of the issue, but so far we have not had any luck.

Thanks,

Lauren

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Gene Mcdonald
Sent: Wednesday, March 09, 2011 6:43 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Epicor 9 Conversion Program 6430

Does anyone regularly run the Conversion Program 6430? We are having On
Hand
inventory variances atn a disturbingly high rate. Currently Epcior has
us
running this program twice a day. They state that they are aware of a
problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.

[Non-text portions of this message have been removed]

----------Legal Disclaimer----------

The information contained in this message may be privileged and
confidential, and is intended solely for the use of the named addressee.
No other person is authorized to access, copy or re-use this message (or
any information contained herein). If you are not the intended
recipient, please notify us immediately by replying to this message and
delete it from your computer.

[Non-text portions of this message have been removed]






This e-mail and any attachments may contain proprietary and/or confidential information. If you are not the intended recipient, please notify the sender immediately by reply e-mail or at 410-472-2900 and then delete the message without using, disseminating, or copying this message or any portion thereof. With e-mail communications you are urged to protect against viruses.


[Non-text portions of this message have been removed]
8
We are running version 9.05.600B2 SQL 64-bit. We know that we have to run it because users see a different on hand quantity in part tracker than in part transaction history tracker. The 2 get out of sync.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Len Hartka
Sent: Wednesday, March 09, 2011 3:10 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430



Good Day:

1. What version are you running.
2. How do you know ( or find) that you have the QOH varience?


len.hartka@...<mailto:len.hartka%40sunautomation.com>

________________________________

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of Hellings, Lauren
Sent: Wednesday, March 09, 2011 3:52 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430

We are having the same issue and run it every Saturday night to make
sure our On Hand quantities are correct. Support gave us the exact
answer that they gave you. We have escalated the issue to see if we can
find the root cause of the issue, but so far we have not had any luck.

Thanks,

Lauren

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Gene Mcdonald
Sent: Wednesday, March 09, 2011 6:43 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Epicor 9 Conversion Program 6430

Does anyone regularly run the Conversion Program 6430? We are having On
Hand
inventory variances atn a disturbingly high rate. Currently Epcior has
us
running this program twice a day. They state that they are aware of a
problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.

[Non-text portions of this message have been removed]

----------Legal Disclaimer----------

The information contained in this message may be privileged and
confidential, and is intended solely for the use of the named addressee.
No other person is authorized to access, copy or re-use this message (or
any information contained herein). If you are not the intended
recipient, please notify us immediately by replying to this message and
delete it from your computer.

[Non-text portions of this message have been removed]

This e-mail and any attachments may contain proprietary and/or confidential information. If you are not the intended recipient, please notify the sender immediately by reply e-mail or at 410-472-2900 and then delete the message without using, disseminating, or copying this message or any portion thereof. With e-mail communications you are urged to protect against viruses.

[Non-text portions of this message have been removed]



----------Legal Disclaimer----------

The information contained in this message may be privileged and confidential, and is intended solely for the use of the named addressee. No other person is authorized to access, copy or re-use this message (or any information contained herein). If you are not the intended recipient, please notify us immediately by replying to this message and delete it from your computer.



[Non-text portions of this message have been removed]
9
Good Day Lauren:

Is Time-Phase screen always correct?


len.hartka@...

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Hellings, Lauren
Sent: Wednesday, March 09, 2011 5:51 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430




We are running version 9.05.600B2 SQL 64-bit. We know that we have to
run it because users see a different on hand quantity in part tracker
than in part transaction history tracker. The 2 get out of sync.

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Len Hartka
Sent: Wednesday, March 09, 2011 3:10 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430

Good Day:

1. What version are you running.
2. How do you know ( or find) that you have the QOH varience?

len.hartka@... <mailto:len.hartka%40sunautomation.com>
<mailto:len.hartka%40sunautomation.com>

________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
On Behalf
Of Hellings, Lauren
Sent: Wednesday, March 09, 2011 3:52 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430

We are having the same issue and run it every Saturday night to make
sure our On Hand quantities are correct. Support gave us the exact
answer that they gave you. We have escalated the issue to see if we can
find the root cause of the issue, but so far we have not had any luck.

Thanks,

Lauren

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ]
On
Behalf Of Gene Mcdonald
Sent: Wednesday, March 09, 2011 6:43 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Epicor 9 Conversion Program 6430

Does anyone regularly run the Conversion Program 6430? We are having On
Hand
inventory variances atn a disturbingly high rate. Currently Epcior has
us
running this program twice a day. They state that they are aware of a
problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.

[Non-text portions of this message have been removed]

----------Legal Disclaimer----------

The information contained in this message may be privileged and
confidential, and is intended solely for the use of the named addressee.
No other person is authorized to access, copy or re-use this message (or
any information contained herein). If you are not the intended
recipient, please notify us immediately by replying to this message and
delete it from your computer.

[Non-text portions of this message have been removed]

This e-mail and any attachments may contain proprietary and/or
confidential information. If you are not the intended recipient, please
notify the sender immediately by reply e-mail or at 410-472-2900 and
then delete the message without using, disseminating, or copying this
message or any portion thereof. With e-mail communications you are urged
to protect against viruses.

[Non-text portions of this message have been removed]

----------Legal Disclaimer----------

The information contained in this message may be privileged and
confidential, and is intended solely for the use of the named addressee.
No other person is authorized to access, copy or re-use this message (or
any information contained herein). If you are not the intended
recipient, please notify us immediately by replying to this message and
delete it from your computer.

[Non-text portions of this message have been removed]






This e-mail and any attachments may contain proprietary and/or confidential information. If you are not the intended recipient, please notify the sender immediately by reply e-mail or at 410-472-2900 and then delete the message without using, disseminating, or copying this message or any portion thereof. With e-mail communications you are urged to protect against viruses.


[Non-text portions of this message have been removed]
10
I am wondering if there is a way to schedule the Conversion Programs to
run automatically.



Mike Tonoyan / Natel Engr.

mtonoyan@...



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Len Hartka
Sent: Wednesday, March 09, 2011 3:38 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430





Good Day Lauren:

Is Time-Phase screen always correct?


len.hartka@... <mailto:len.hartka%40sunautomation.com>

________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Hellings, Lauren
Sent: Wednesday, March 09, 2011 5:51 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430

We are running version 9.05.600B2 SQL 64-bit. We know that we have to
run it because users see a different on hand quantity in part tracker
than in part transaction history tracker. The 2 get out of sync.

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of Len Hartka
Sent: Wednesday, March 09, 2011 3:10 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430

Good Day:

1. What version are you running.
2. How do you know ( or find) that you have the QOH varience?

len.hartka@... <mailto:len.hartka%40sunautomation.com>
<mailto:len.hartka%40sunautomation.com>
<mailto:len.hartka%40sunautomation.com>

________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
On Behalf
Of Hellings, Lauren
Sent: Wednesday, March 09, 2011 3:52 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430

We are having the same issue and run it every Saturday night to make
sure our On Hand quantities are correct. Support gave us the exact
answer that they gave you. We have escalated the issue to see if we can
find the root cause of the issue, but so far we have not had any luck.

Thanks,

Lauren

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ]
On
Behalf Of Gene Mcdonald
Sent: Wednesday, March 09, 2011 6:43 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Epicor 9 Conversion Program 6430

Does anyone regularly run the Conversion Program 6430? We are having On
Hand
inventory variances atn a disturbingly high rate. Currently Epcior has
us
running this program twice a day. They state that they are aware of a
problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.

[Non-text portions of this message have been removed]

----------Legal Disclaimer----------

The information contained in this message may be privileged and
confidential, and is intended solely for the use of the named addressee.
No other person is authorized to access, copy or re-use this message (or
any information contained herein). If you are not the intended
recipient, please notify us immediately by replying to this message and
delete it from your computer.

[Non-text portions of this message have been removed]

This e-mail and any attachments may contain proprietary and/or
confidential information. If you are not the intended recipient, please
notify the sender immediately by reply e-mail or at 410-472-2900 and
then delete the message without using, disseminating, or copying this
message or any portion thereof. With e-mail communications you are urged
to protect against viruses.

[Non-text portions of this message have been removed]

----------Legal Disclaimer----------

The information contained in this message may be privileged and
confidential, and is intended solely for the use of the named addressee.
No other person is authorized to access, copy or re-use this message (or
any information contained herein). If you are not the intended
recipient, please notify us immediately by replying to this message and
delete it from your computer.

[Non-text portions of this message have been removed]

This e-mail and any attachments may contain proprietary and/or
confidential information. If you are not the intended recipient, please
notify the sender immediately by reply e-mail or at 410-472-2900 and
then delete the message without using, disseminating, or copying this
message or any portion thereof. With e-mail communications you are urged
to protect against viruses.

[Non-text portions of this message have been removed]




______________________________________________________________________
Notice: This email transmission may contain confidential information and is intended only for the person(s) named. Any use, copying or disclosure to/by any other person(s) is strictly prohibited. By accepting this information, recipients confirm that they understand and will comply with all applicable ITAR and EAR requirements.
______________________________________________________________________

[Non-text portions of this message have been removed]
11
>
> We are running version 9.05.600B2 SQL 64-bit. We know that we have to run it because users see a different on hand quantity in part tracker than in part transaction history tracker. The 2 get out of sync.
>

PartBin is always correct, which is why you never see any issues with
PartTran. The issue is that Vantage/Epicor doesn't always update
PartWhse which holds the summary information. PartWhse is where Part
Tracker, Job Manager, and other programs get these values to save time
by not having to sum the PartBin records. The Conversion programs just
recalc the fields in PartWhse.

So, what if we wrote a Data Directive that checks the values of
PartWhse and PartBin after they are updated? This might help us
discover under which conditions that the table is not being updated.

Thoughts?

Mark W.
12
Hi we are on 8.03.405a and have to run it regularly, more so lately for some reason, for us the demand figure is incorrect and running this corrects it. I don't really get how this can be normal, we run a regenerative MRP every day so how it can't recalculate the demand correctly is strange.

Mark


--- In vantage@yahoogroups.com, Gene Mcdonald <gmcdonald333@...> wrote:
>
> Does anyone regularly run the Conversion Program 6430? We are having On Hand
> inventory variances atn a disturbingly high rate. Currently Epcior has us
> running this program twice a day. They state that they are aware of a problem
> and that they have not been able to isolate the root cause yet.
>
> Does anyone have any comments or thoughts?
>
> Thanks,
> Gene M.
>
>
>
>
> [Non-text portions of this message have been removed]
>
13
Hello Len,

We use Time-Phase, but to be honest I don't know if the information on that screen is correct or not when we see this issue. I have never looked at that screen, but I'll be sure to check it next time.

Thanks,

Lauren

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Len Hartka
Sent: Wednesday, March 09, 2011 5:38 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430



Good Day Lauren:

Is Time-Phase screen always correct?


len.hartka@...<mailto:len.hartka%40sunautomation.com>

________________________________

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of Hellings, Lauren
Sent: Wednesday, March 09, 2011 5:51 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430

We are running version 9.05.600B2 SQL 64-bit. We know that we have to
run it because users see a different on hand quantity in part tracker
than in part transaction history tracker. The 2 get out of sync.

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Len Hartka
Sent: Wednesday, March 09, 2011 3:10 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430

Good Day:

1. What version are you running.
2. How do you know ( or find) that you have the QOH varience?

len.hartka@...<mailto:len.hartka%40sunautomation.com> <mailto:len.hartka%40sunautomation.com>
<mailto:len.hartka%40sunautomation.com>

________________________________

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
On Behalf
Of Hellings, Lauren
Sent: Wednesday, March 09, 2011 3:52 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Epicor 9 Conversion Program 6430

We are having the same issue and run it every Saturday night to make
sure our On Hand quantities are correct. Support gave us the exact
answer that they gave you. We have escalated the issue to see if we can
find the root cause of the issue, but so far we have not had any luck.

Thanks,

Lauren

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ]
On
Behalf Of Gene Mcdonald
Sent: Wednesday, March 09, 2011 6:43 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Epicor 9 Conversion Program 6430

Does anyone regularly run the Conversion Program 6430? We are having On
Hand
inventory variances atn a disturbingly high rate. Currently Epcior has
us
running this program twice a day. They state that they are aware of a
problem
and that they have not been able to isolate the root cause yet.

Does anyone have any comments or thoughts?

Thanks,
Gene M.

[Non-text portions of this message have been removed]

----------Legal Disclaimer----------

The information contained in this message may be privileged and
confidential, and is intended solely for the use of the named addressee.
No other person is authorized to access, copy or re-use this message (or
any information contained herein). If you are not the intended
recipient, please notify us immediately by replying to this message and
delete it from your computer.

[Non-text portions of this message have been removed]

This e-mail and any attachments may contain proprietary and/or
confidential information. If you are not the intended recipient, please
notify the sender immediately by reply e-mail or at 410-472-2900 and
then delete the message without using, disseminating, or copying this
message or any portion thereof. With e-mail communications you are urged
to protect against viruses.

[Non-text portions of this message have been removed]

----------Legal Disclaimer----------

The information contained in this message may be privileged and
confidential, and is intended solely for the use of the named addressee.
No other person is authorized to access, copy or re-use this message (or
any information contained herein). If you are not the intended
recipient, please notify us immediately by replying to this message and
delete it from your computer.

[Non-text portions of this message have been removed]

This e-mail and any attachments may contain proprietary and/or confidential information. If you are not the intended recipient, please notify the sender immediately by reply e-mail or at 410-472-2900 and then delete the message without using, disseminating, or copying this message or any portion thereof. With e-mail communications you are urged to protect against viruses.

[Non-text portions of this message have been removed]



----------Legal Disclaimer----------

The information contained in this message may be privileged and confidential, and is intended solely for the use of the named addressee. No other person is authorized to access, copy or re-use this message (or any information contained herein). If you are not the intended recipient, please notify us immediately by replying to this message and delete it from your computer.



[Non-text portions of this message have been removed]
14
I have asked this question "can we schedule a conversion program to run".
The answer I have had from Epicor is no.
Even our internal developers say that there are certain parameters set when in the Data Admin Tools menu is loaded that they don't have access to. The programs require some of these parameters, so running them using Progress from the command line is not a trivial task.

If anyone has a way of doing this, it would be great to know!
There are multiple programs that need to be run on regular basis, and this would keep some of these issues down.

The other main program we know of that needs to be run on a regular basis is the "Customer Credit Limit" conversion program.


Cheers,
Tobi


--- In vantage@yahoogroups.com, "Mike Tonoyan" <mtonoyan@...> wrote:
>
> I am wondering if there is a way to schedule the Conversion Programs to
> run automatically.
>
>
>
> Mike Tonoyan / Natel Engr.
>
> mtonoyan@...
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Len Hartka
> Sent: Wednesday, March 09, 2011 3:38 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Epicor 9 Conversion Program 6430
>
>
>
>
>
> Good Day Lauren:
>
> Is Time-Phase screen always correct?
>
>
> len.hartka@... <mailto:len.hartka%40sunautomation.com>
>
> ________________________________
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
> Behalf
> Of Hellings, Lauren
> Sent: Wednesday, March 09, 2011 5:51 PM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] Epicor 9 Conversion Program 6430
>
> We are running version 9.05.600B2 SQL 64-bit. We know that we have to
> run it because users see a different on hand quantity in part tracker
> than in part transaction history tracker. The 2 get out of sync.
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> ] On
> Behalf Of Len Hartka
> Sent: Wednesday, March 09, 2011 3:10 PM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] Epicor 9 Conversion Program 6430
>
> Good Day:
>
> 1. What version are you running.
> 2. How do you know ( or find) that you have the QOH varience?
>
> len.hartka@... <mailto:len.hartka%40sunautomation.com>
> <mailto:len.hartka%40sunautomation.com>
> <mailto:len.hartka%40sunautomation.com>
>
> ________________________________
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
> On Behalf
> Of Hellings, Lauren
> Sent: Wednesday, March 09, 2011 3:52 PM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] Epicor 9 Conversion Program 6430
>
> We are having the same issue and run it every Saturday night to make
> sure our On Hand quantities are correct. Support gave us the exact
> answer that they gave you. We have escalated the issue to see if we can
> find the root cause of the issue, but so far we have not had any luck.
>
> Thanks,
>
> Lauren
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ]
> On
> Behalf Of Gene Mcdonald
> Sent: Wednesday, March 09, 2011 6:43 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Epicor 9 Conversion Program 6430
>
> Does anyone regularly run the Conversion Program 6430? We are having On
> Hand
> inventory variances atn a disturbingly high rate. Currently Epcior has
> us
> running this program twice a day. They state that they are aware of a
> problem
> and that they have not been able to isolate the root cause yet.
>
> Does anyone have any comments or thoughts?
>
> Thanks,
> Gene M.
>
> [Non-text portions of this message have been removed]
>
> ----------Legal Disclaimer----------
>
> The information contained in this message may be privileged and
> confidential, and is intended solely for the use of the named addressee.
> No other person is authorized to access, copy or re-use this message (or
> any information contained herein). If you are not the intended
> recipient, please notify us immediately by replying to this message and
> delete it from your computer.
>
> [Non-text portions of this message have been removed]
>
> This e-mail and any attachments may contain proprietary and/or
> confidential information. If you are not the intended recipient, please
> notify the sender immediately by reply e-mail or at 410-472-2900 and
> then delete the message without using, disseminating, or copying this
> message or any portion thereof. With e-mail communications you are urged
> to protect against viruses.
>
> [Non-text portions of this message have been removed]
>
> ----------Legal Disclaimer----------
>
> The information contained in this message may be privileged and
> confidential, and is intended solely for the use of the named addressee.
> No other person is authorized to access, copy or re-use this message (or
> any information contained herein). If you are not the intended
> recipient, please notify us immediately by replying to this message and
> delete it from your computer.
>
> [Non-text portions of this message have been removed]
>
> This e-mail and any attachments may contain proprietary and/or
> confidential information. If you are not the intended recipient, please
> notify the sender immediately by reply e-mail or at 410-472-2900 and
> then delete the message without using, disseminating, or copying this
> message or any portion thereof. With e-mail communications you are urged
> to protect against viruses.
>
> [Non-text portions of this message have been removed]
>
>
>
>
> ______________________________________________________________________
> Notice: This email transmission may contain confidential information and is intended only for the person(s) named. Any use, copying or disclosure to/by any other person(s) is strictly prohibited. By accepting this information, recipients confirm that they understand and will comply with all applicable ITAR and EAR requirements.
> ______________________________________________________________________
>
> [Non-text portions of this message have been removed]
>
15
Our environment is completed managed and hosted through Epicor. They have confirmed that there is no way to schedule these conversions. We also have the Customer Credit Limit conversion scheduled to run twice a week and someone from our outsourcing group has to run them manually every time.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Tobi Vaudrey
Sent: Thursday, March 10, 2011 1:27 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Epicor 9 Conversion Program 6430



I have asked this question "can we schedule a conversion program to run".
The answer I have had from Epicor is no.
Even our internal developers say that there are certain parameters set when in the Data Admin Tools menu is loaded that they don't have access to. The programs require some of these parameters, so running them using Progress from the command line is not a trivial task.

If anyone has a way of doing this, it would be great to know!
There are multiple programs that need to be run on regular basis, and this would keep some of these issues down.

The other main program we know of that needs to be run on a regular basis is the "Customer Credit Limit" conversion program.

Cheers,
Tobi

--- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>, "Mike Tonoyan" <mtonoyan@...<mailto:mtonoyan@...>> wrote:
>
> I am wondering if there is a way to schedule the Conversion Programs to
> run automatically.
>
>
>
> Mike Tonoyan / Natel Engr.
>
> mtonoyan@...
>
>
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
> Of Len Hartka
> Sent: Wednesday, March 09, 2011 3:38 PM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] Epicor 9 Conversion Program 6430
>
>
>
>
>
> Good Day Lauren:
>
> Is Time-Phase screen always correct?
>
>
> len.hartka@<mailto:len.hartka@>... <mailto:len.hartka%40sunautomation.com>
>
> ________________________________
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ] On
> Behalf
> Of Hellings, Lauren
> Sent: Wednesday, March 09, 2011 5:51 PM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] Epicor 9 Conversion Program 6430
>
> We are running version 9.05.600B2 SQL 64-bit. We know that we have to
> run it because users see a different on hand quantity in part tracker
> than in part transaction history tracker. The 2 get out of sync.
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> ] On
> Behalf Of Len Hartka
> Sent: Wednesday, March 09, 2011 3:10 PM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] Epicor 9 Conversion Program 6430
>
> Good Day:
>
> 1. What version are you running.
> 2. How do you know ( or find) that you have the QOH varience?
>
> len.hartka@<mailto:len.hartka@>... <mailto:len.hartka%40sunautomation.com>
> <mailto:len.hartka%40sunautomation.com>
> <mailto:len.hartka%40sunautomation.com>
>
> ________________________________
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
> On Behalf
> Of Hellings, Lauren
> Sent: Wednesday, March 09, 2011 3:52 PM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] Epicor 9 Conversion Program 6430
>
> We are having the same issue and run it every Saturday night to make
> sure our On Hand quantities are correct. Support gave us the exact
> answer that they gave you. We have escalated the issue to see if we can
> find the root cause of the issue, but so far we have not had any luck.
>
> Thanks,
>
> Lauren
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ]
> On
> Behalf Of Gene Mcdonald
> Sent: Wednesday, March 09, 2011 6:43 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Epicor 9 Conversion Program 6430
>
> Does anyone regularly run the Conversion Program 6430? We are having On
> Hand
> inventory variances atn a disturbingly high rate. Currently Epcior has
> us
> running this program twice a day. They state that they are aware of a
> problem
> and that they have not been able to isolate the root cause yet.
>
> Does anyone have any comments or thoughts?
>
> Thanks,
> Gene M.
>
> [Non-text portions of this message have been removed]
>
> ----------Legal Disclaimer----------
>
> The information contained in this message may be privileged and
> confidential, and is intended solely for the use of the named addressee.
> No other person is authorized to access, copy or re-use this message (or
> any information contained herein). If you are not the intended
> recipient, please notify us immediately by replying to this message and
> delete it from your computer.
>
> [Non-text portions of this message have been removed]
>
> This e-mail and any attachments may contain proprietary and/or
> confidential information. If you are not the intended recipient, please
> notify the sender immediately by reply e-mail or at 410-472-2900 and
> then delete the message without using, disseminating, or copying this
> message or any portion thereof. With e-mail communications you are urged
> to protect against viruses.
>
> [Non-text portions of this message have been removed]
>
> ----------Legal Disclaimer----------
>
> The information contained in this message may be privileged and
> confidential, and is intended solely for the use of the named addressee.
> No other person is authorized to access, copy or re-use this message (or
> any information contained herein). If you are not the intended
> recipient, please notify us immediately by replying to this message and
> delete it from your computer.
>
> [Non-text portions of this message have been removed]
>
> This e-mail and any attachments may contain proprietary and/or
> confidential information. If you are not the intended recipient, please
> notify the sender immediately by reply e-mail or at 410-472-2900 and
> then delete the message without using, disseminating, or copying this
> message or any portion thereof. With e-mail communications you are urged
> to protect against viruses.
>
> [Non-text portions of this message have been removed]
>
>
>
>
> __________________________________________________________
> Notice: This email transmission may contain confidential information and is intended only for the person(s) named. Any use, copying or disclosure to/by any other person(s) is strictly prohibited. By accepting this information, recipients confirm that they understand and will comply with all applicable ITAR and EAR requirements.
> __________________________________________________________
>
> [Non-text portions of this message have been removed]
>



----------Legal Disclaimer----------

The information contained in this message may be privileged and confidential, and is intended solely for the use of the named addressee. No other person is authorized to access, copy or re-use this message (or any information contained herein). If you are not the intended recipient, please notify us immediately by replying to this message and delete it from your computer.



[Non-text portions of this message have been removed]
16
I am looking for a method to create Receiver Numbers for all Purchase Receipts (Similar to what Avante does). Has anyone done this or have any suggesstions. Thanks Bob JessopIT Director p.s. I have not played around with BPM's yet, my guess that is how to do it.

[Non-text portions of this message have been removed]
17
Legal Numbers

--- In vantage@yahoogroups.com, "Robert Jessop" <rjj@...> wrote:
>
> I am looking for a method to create Receiver Numbers for all Purchase Receipts (Similar to what Avante does). Has anyone done this or have any suggesstions. Thanks Bob JessopIT Director p.s. I have not played around with BPM's yet, my guess that is how to do it.
>
> [Non-text portions of this message have been removed]
>
18
This might work for you, it is a button that generates a unique pack id.

http://www.datixinc.com/wordpress/2011/03/automatic-pack-slip-number-generation/


You are right, you could do this through a BPM as well.
--- In vantage@yahoogroups.com, "Robert Jessop" <rjj@...> wrote:
>
> I am looking for a method to create Receiver Numbers for all Purchase Receipts (Similar to what Avante does). Has anyone done this or have any suggesstions. Thanks Bob JessopIT Director p.s. I have not played around with BPM's yet, my guess that is how to do it.
>
> [Non-text portions of this message have been removed]
>
19
Thanks, I'll have to play around with that one. Looks interesting


From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of bsapot
Sent: Thursday, March 10, 2011 4:26 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Epicor 9 - BPM to Auto Assign Receiver Numbers

This might work for you, it is a button that generates a unique pack id.

http://www.datixinc.com/wordpress/2011/03/automatic-pack-slip-number-generation/

You are right, you could do this through a BPM as well.
--- In vantage@yahoogroups.com, "Robert Jessop" <rjj@...> wrote:
>
> I am looking for a method to create Receiver Numbers for all Purchase Receipts (Similar to what Avante does). Has anyone done this or have any suggesstions. Thanks Bob JessopIT Director p.s. I have not played around with BPM's yet, my guess that is how to do it.
>
> [Non-text portions of this message have been removed]
>




[Non-text portions of this message have been removed]
20
Bob,



I've done similar things. On your preprocessing directive when it's adding
the receipt, write a 4GL program that reads the Company file, adds 1 to
Number01, and uses that number as the receiver number.



HTH,

Kevin Simon



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Robert Jessop
Sent: Thursday, March 10, 2011 3:54 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Epicor 9 - BPM to Auto Assign Receiver Numbers





I am looking for a method to create Receiver Numbers for all Purchase
Receipts (Similar to what Avante does). Has anyone done this or have any
suggesstions. Thanks Bob JessopIT Director p.s. I have not played around
with BPM's yet, my guess that is how to do it.

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]